CELESTION G12P SEV 80-8 12″ Speaker 80 W 8 Ohm

85.56 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
This speaker meets the expanded frequency range often requested by the new generation of amp manufacturers. The Seventy 80 is detailed and crisply defined, with a tightly controlled lowend and punchy, aggressive upper midrange. The top-end response is also subtly increased. Used singly, in pairs or quartets – it is capable of reproducing a wide […]

 

Read more

This speaker meets the expanded frequency range often requested by the new generation of amp manufacturers.
The Seventy 80 is detailed and crisply defined, with a tightly controlled lowend and punchy, aggressive upper midrange. The top-end response is also subtly increased. Used singly, in pairs or quartets – it is capable of reproducing a wide range of sounds and styles whilst adding the undeniable Celestion character to any amp.

General Specifications
Nominal diameter: 12“, 305 mm
Power Rating: 80 W
Nominal impedance: 8 Ohm
Sensitivity: 98 dB
Chassis type: Pressed steel
Voice coil diameter: 1.75“, 44.5 mm
Voice coil material: Round copper
Magnet type: Ceramic Magnet
Frequency range: 85-5000 Hz
Resonance frequency, FS: 103 Hz
DC resistance, Re: 5.4 Ohm & 11.78 Ohm
Mounting Information
Diameter: 12.2“, 309 mm
Overall depth: 4.7“, 119 mm
Magnet structure diameter: 5.3“, 134 mm
Cut-out diameter: 11.1“, 283 mm
Mounting slot dimensions 0.31“, 7.9 mm Ø
Number of mounting slots: 4
Mounting slot PCD: 11.7“, 297 mm

Weight 3.10 kg

Reviews

There are no reviews yet.

Be the first to review “CELESTION G12P SEV 80-8 12″ Speaker 80 W 8 Ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

CELESTION G12P SEV 80-8 12" Speaker 80 W 8 Ohm removeB & C Speakers 12-PZ32 Woofer 12 inch 400WRMS 97dB removeEMINENCE ED12A Delta-12A 12'' 400 W 8 Ohm SPEAKER Compatible replacement for YAMAHA JAY5120 and more removeB & C Speakers 12-NCX Speaker 12" coaxial 200WFL+50WHF removeCELESTION T5491 WOOFER 12'' NTR12-3018D PRO AUDIO 350W removeB & C Speakers 12-PS76 SPEAKER subwoofer 12 inch 450W, 95dB remove
NameCELESTION G12P SEV 80-8 12" Speaker 80 W 8 Ohm removeB & C Speakers 12-PZ32 Woofer 12 inch 400WRMS 97dB removeEMINENCE ED12A Delta-12A 12'' 400 W 8 Ohm SPEAKER Compatible replacement for YAMAHA JAY5120 and more removeB & C Speakers 12-NCX Speaker 12" coaxial 200WFL+50WHF removeCELESTION T5491 WOOFER 12'' NTR12-3018D PRO AUDIO 350W removeB & C Speakers 12-PS76 SPEAKER subwoofer 12 inch 450W, 95dB remove
Image
SKUT560512-PZ32ED12A12-NCXT549112-PS76
Rating
Price 85.56 incl. GR VAT 156.00 incl. GR VAT 147.55 incl. GR VAT 383.07 incl. GR VAT 237.58 incl. GR VAT 209.00 incl. GR VAT
Stock

Available on backorder

In stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderIn stockOut of stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Read more

Add to cart

Add to cart

Add to cart

Description
Content

This speaker meets the expanded frequency range often requested by the new generation of amp manufacturers.
The Seventy 80 is detailed and crisply defined, with a tightly controlled lowend and punchy, aggressive upper midrange. The top-end response is also subtly increased. Used singly, in pairs or quartets - it is capable of reproducing a wide range of sounds and styles whilst adding the undeniable Celestion character to any amp.

General Specifications
Nominal diameter: 12“, 305 mm
Power Rating: 80 W
Nominal impedance: 8 Ohm
Sensitivity: 98 dB
Chassis type: Pressed steel
Voice coil diameter: 1.75“, 44.5 mm
Voice coil material: Round copper
Magnet type: Ceramic Magnet
Frequency range: 85-5000 Hz
Resonance frequency, FS: 103 Hz
DC resistance, Re: 5.4 Ohm & 11.78 Ohm
Mounting Information
Diameter: 12.2“, 309 mm
Overall depth: 4.7“, 119 mm
Magnet structure diameter: 5.3“, 134 mm
Cut-out diameter: 11.1“, 283 mm
Mounting slot dimensions 0.31“, 7.9 mm Ø
Number of mounting slots: 4
Mounting slot PCD: 11.7“, 297 mm








Long excursion 12" woofer with 800W power handling for
subwoofer application. A special 3" copper voice coil using
proprietary high temperature adhesives and an optimized
magnet assembly guarantees superb LF dynamic range with a
very low distortion. Due to the linear characteristics of the 12
PZ 32, exceptional results are obtained in horn loaded
subwoofer applications.

Specifications
Nominal Diameter 320 mm (12 in)
Nominal Impedance 8 Ω
Minumum Impedance 7.8 Ω
Power Handling
(70 –700 Hz)
Nominal1 400 W
Continuous Program2 800 W
Sensitivity (1W/1m)3 95 dB
Frequency Range 40-2500 Hz
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 22 mm (7/8 in)
Magnetic Gap Depth 10 mm (3/8 in)
Flux Density 1.1 T
Also available in 4 Ω, data upon request

Thiele & Small Parameters4
Fs 38 Hz
Re 6.2 Ω
Qes 0.2
Qms 5.9
Qts 0.19
Vas 102 dm3 (3.6 ft3)
Sd 522 cm2 (80.9 in2)
η0 2.7%
X max ± 5.5 mm
X var ± 5.5 mm
Mms 64 g
Bl 21.7 T·m
Le 2.7 mH

Mounting and Shipping Information
Overall Diameter 316 mm (12.4 in)
Bolt Circle Diameter 296 mm (11.6 in)
Baffle Cutout Diameter 282 mm (11.1 in)
Depth 134 mm (5.3 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 7.6 kg (16.7 lb)
Shipping Weight 8.5 kg (18.7 lb)
Shipping Box 380x380x170 mm
(15x15x6.7 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2500 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test.

DELTA-12A Standard American Recommended for professional audio as a mid-bass or woofer (with high-pass filter) in vented enclosures. *Good replacement for Yamaha 12″ JAY51200 (1216301A), JAY51100, JAY5120, JAY5110 woofers. Or Loudspeakers C112V, SM12V, BR12, BR12M, S112V, S112IV, SM121V, SV12, SV12M & more   SPECIFICATION
  • Nominal Basket Diameter 12“, 304.8 mm
  • Nominal Impedance 8 ohms
  • Power Rating Watts 400 W / Music Program 800 W
  • Resonance 55 Hz
  • Usable Frequency Range 54 Hz - 5 kHz
  • Sensitivity 98.3
  • Magnet Weight 56 oz.
  • Gap Height 0.375“, 9.53 mm
  • Voice Coil Diameter 2.5“, 63.5 mm
THIELE & Small Parameters
  • Resonant Frequency (fs) 55 Hz
  • DC Resistance (Re) 6.3
  • Coil Inductance (Le) 0.74 mH
  • Mechanical Q (Qms) 5.27
  • Electromagnetic Q (Qes) 0.46
  • Total Q (Qts) 0.43
  • Compliance Equivalent Volume 81.3 liters (Vas) 81.3 liters / 2.9 cu. ft.
  • Peak Diaphragm Displacement Volume 125 cc
  • Mechanical Compliance of Suspension 0.21 mm/N
  • BL Product (BL) 13.5 T-M
  • Diaphragm Mass inc. Airload (Mms) 39 grams
  • Efficiency Bandwidth Product (EBP) 120
  • Maximum Linear Excursion (Xmax) 2.4 mm
  • Surface Area of Cone (Sd) 519.5 cm²
  • Maximum Mechanical Limit (Xlim) 9.9 mm
MOUNTING Information
  • Recommended Enclosure Volume Sealed N/A Vented 25.5-85 liters/0.9-3 cu.ft.
  • Overall Diameter 12.03“, 305.5 mm
  • Baffle Hole Diameter 10.95“, 278.1 mm
  • Front Sealing Gasket fitted as standard
  • Rear Sealing Gasket fitted as standard
  • Mounting Holes Diameter 0.25“, 6.4 mm
  • Mounting Holes B.C.D. 11.59“, 294.3 mm
  • Depth 5.35“, 136 mm
MATERIALS of Construction
  • Aluminum voice coil
  • Polyimide former
  • Ferrite magnet
  • Vented core
  • Pressed steel basket
  • Paper Cone
  • Cloth cone edge
  • Solid composition felt dust cap
400 W continuous program power capacity
70° nominal coverage
60 – 18000 Hz response
96 dB sensitivity
Single Neodymium magnet assembly
XO-6 dedicated crossover network
  • 12” neodymium woofer offers 300Wrms (AES) continuous power handling and 98dB sensitivity
  • 3” high temperature Inside/Outside voice coil efficiently dissipates heat, preventing sensitivity loss through thermal compression
  • M-roll surround provides progressive excursion control, yielding a smooth response even at extremes of frequency range
  • Extremely lightweight design combined with a highly efficient magnet assembly results in exceptional power-to-weight ratio
  • Intelligent heat management in both chassis and magnet assembly design further minimizes distortion
Nominal diameter (mm/in) 305/12
Power Rating (AES, W rms) 300
Nominal impedance (Ω) 8
Voice coil diameter (mm/in) 76.2/3.0
Magnet type Neodymium
Chassis type Cast aluminium
Sensitivity (dB) 98
Frequency range (Hz) 50-4000
Coil material Round copper
Cone material Kevlar loaded paper
Surround material Cloth-sealed
Suspension Single
Xmax (mm/in) 4/0.16
Gap depth (mm/in) 8.0/0.32
Voice coil winding width (mm/in) 16.0/0.63
Small Signal Parameters
D (m/in) 0.26/10.24
Fs (Hz) 56.4
Mmd (g/oz) 54.41/1.92
Mair 6.92/0.244
Qms 2.74
Qes 0.33
Qts 0.29
Re (Ω) 5.77
Vas (lt/ft3) 51.78/1.828
BI (Tm) 19.61
Cms (mm/N) 0.13
Rms (kg/s) 7.921
Le (mH) 0.778
Mounting Information
Overall diameter (mm/in) 310/12.2
Overall depth (mm/in) 137/5.39
Cut-out diameter (mm/in) 286/11.26
Mounting slot dimensions (mm/in) 6.5/0.26 x 9.5/0.37
Number of mounting slots 8
Mounting slot PCD range (mm/in) 294/11.57
Unit weight (kg/lb) 2.6/5.7
Packed Dimensions and Weight
Single pack size W x D x H (mm/in) -
Single pack weight (kg/lb) -
Multipack (60) size W x D x H (mm/in) 1080 x 980 x 880/42.5 x 38.6 x 34.6
Multipack (60) weight (kg/lb) 146/321

Specification
Nominal Diameter 320 (12) mm (in)
Nominal Impedance (1) 8 Ohm
Minimum Impedence 7.5 Ohm
Nominal Power Handling (2) 450 W
Continuous Power Handling (3) 900 W
Sensitivity (1W/1m) (4) 95 dB
Frequency Range 40 - 1000 Hz
Voice Coil Diameter 76 (3) mm (in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 22 (0.9) mm (in)
Magnetic Gap Depth 10.5 (0.4) mm (in)
Flux Density 1.15 T

Thiele & Small Parameters
Fs 42 Hz
Re 6.1 Ohm
Qes 0.22
Qms 3.8
Qts 0.2
Vas 75 (2.6) dm3 (ft3)
Sd 522 (80.9) cm2 (in2)
Eta Zero 2.4 %
Xmax +/- 7 mm
Xvar +/- 9 mm
Mms 74 g
Bl 23.5 Txm
Le 2 mH

Mounting and Shipping Info
Overall Diameter 316 mm (12.4 in)
Bolt Circle Diameter 296 mm (11.6 in)
Baffle Cutout Diameter 282 mm (11.1 in)
Depth 140 mm (5.5 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 7.6 kg (16.7 lb)
Shipping Weight 8.4 kg (18.5 lb)
Shipping Box 340x340x170 mm
(13.4x13.4x6.7 in)
1For different impedances, please ask.
22 hours test made with continuous pink noise signal (6 dB crest factor).
Power calculated on rated minimum impedance.
3Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.

Weight3.10 kg2.50 kg4.00 kg8.00 kg2.60 kg7.60 kgDimensionsN/AN/AN/AN/AN/AN/AAdditional information
Weight 3.10 kg
Weight 2.50 kg
Weight 4.00 kg
Weight 8.00 kg
Weight 2.60 kg
Weight 7.60 kg