| Content | Price WITHOUT VAT
CELESTION G10S-50 WOOFER 10\'\' 50W 16 Ohm
Vintage Speaker with warm low end & good clarity. Great for rhythm playing or Rock \'n Roll
The pictures show the condition of the speaker. Made in England.
General specifications
| Nominal diameter (mm/in) |
254/10 |
| Power Rating (AES, W rms) |
50 |
| Nominal impedance (Ω) |
16 |
| Voice coil diameter (mm/in) |
38.1/1.5 |
| Magnet type |
Ceramic |
| Magnet weight (kg/oz) |
0.765/27 |
| Chassis type |
Pressed steel |
| Sensitivity (dB) |
97 |
| Frequency range (Hz) |
100-6000 |
| Coil material |
Round copper |
| Former material |
Polyimide |
| Cone material |
Kevlar loaded paper |
|
DYNACORD MFT2008 (330 983) 10'' Transducer gives excellent horizontal coverage and extremely low distortion.
|
High efficiency mid-bass, 2.5” aluminium voice coil,
with very flat response up to 4 kHz.
Specifications
Nominal Diameter 250 mm (10 in.)
Nominal Impedance 8 Ω
Minumum Impedance 6.9 Ω
Power Handling
(60 –600 Hz)
Nominal1 250 W
Continuous Program2 500 W
Sensitivity (1W/1m)3 99 dB
Frequency Range 60-4000 Hz
Voice Coil Diameter 65 mm (2.5 in.)
Winding Material Aluminium
Former Material Glass Fibre
Winding Depth 12 mm (1/2 in.)
Magnetic Gap Depth 8 mm (5/16 in.)
Flux Density 1.25 T
Also available in 16 Ω, data upon request
Thiele & Small Parameters4
Fs 60 Hz
Re 5.7 Ω
Qes 0.19
Qms 6.3
Qts 0.18
Vas 37 dm.3 (1.3 cu. ft.)
Sd 320 cm.2 (49.1 sq. in.)
η0 4.1 %
X max ± 2.4 mm.
Mms 27 gr.
Bl 17.7 Tm
Le 1.3 mH
Mounting and Shipping Informations
Overall Diameter 260 mm. (10.2 in.)
Bolt Circle Diameter 244 mm. (9.6 in.)
Baffle Cutout Diameter 228 mm. (8.8 in.)
Depth 110 mm. (4.3 in.)
Flange and Gasket Thickness 17 mm. (2/3 in.)
Net Weight 7.1 Kg. (15.6 lb.)
Shipping Weight 7.8 Kg. (17.2 lb.)
Shipping Box 320x320x160 mm
(12x12x6.3 in.)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range . Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 200 to 4000 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test.
| | 2.5" voice coil Fiberglass former and Aluminium Winding
PS Spider with Progressive Waves
DAR Cloth surround with Double Asymmetric Rolls Technology (DAR)
WpT Waterproof Cone Treatment
BMF Balanced Ferrite Magnet Circuit with Aluminium Demodulating Ring
VMVc Ventilated Magnet and Voice Coil to reduce Power Compression
96.2 dB sensitivity
Frequency Range 50-3500 Hz
Shape Cylindrical
Product type Cone driver
Brand Sica
Frequency coverage type Low, Midbass, Midrange
Dimensional category 10.5 inch
Front chape Cylindrical
External diametre 268 mm
Mounting diametre 229.8 mm
Magnet type Ferrite
Basket masterial Aluminium
Nominal impedance 4 ohm
Nominal power handling 300 W
Max power handling 600 W
Manufacturer sensitivity 96.2 dB
Calculated sensitivity 94 dB
Frequency response 55-3500 Hz
Voice coil diameter 2.5 inch
Winding material Aluminium
Voice coil former Glass fiber
Winding depth 12 mm
Gap height 8 mm
Flux density 1.05 T
Depth 119.5 mm
Depth after front 107 mm
Front thickness 12.5 mm
Diamètre aimant (mm) 145 mm
Weight 5.6 kg
Fs 51 Hz
Re 3.1 ohm
Qes 0.32
Qms 5.01
Qts 0.3
Vas 47.7 L
Sd 346.4 cm²
Cms 280 µm/N
Efficiency 1.92 %
Calculated efficiency 1.9 %
Xvar 7.5 mm
Mms 34.8 gr
BL 10.4 T.m
Le 0.34 mH
EBP 159
Dome material Paper
Cone material Paper
Surround material Cloth
Surround shape Double roll
Shipping weight 5.6 kg |
| 700 W continuous program power capacity |
| | 76 mm (3 in) aluminium voice coil |
| | 55 – 4000 Hz response |
| | 96 dB sensitivity |
| | Shorting copper cap for extended HF response |
|
Reviews
There are no reviews yet.