Content | MagicQ Software
MagicDMX is a low cost, single universe USB DMX interface created by ChamSys which contains an on board processor to process the DMX packets. Because all timing is done by the interface rather than relying on the host operating system, this ensures that the DMX timing is correct and consistent. MagicDMX connects to MagicQ running under Windows, Mac or Linux. It doesn\'t use any special drivers for the device, so you can just plug and play. MagicDMX defaults to outputing on Universe 1 from the MagicQ software but can be used on any universe.
MagicDMX has electrical protection for normal usage. Users requiring full optical isolation should consider the MagicQ Twin DMX Interface, the SnakeSys 4 Universe Ethernet Interface or any of the MagicQ Wing products which all have full optical isolation.
The MagicDMX interfaces do not unlock the restricted features of MagicQ software such as remote control via iOS/Android, audio input and full screen execute window. Users requring these features will need a ChamSys interface such as Twin DMX Interface, Mini Wing, PC Wing Compact or SnakeSys interface.
Note, MagicDMX interfaces to do remove the \'demo mode\' banner from MagicQ. The MagicDMX Full will output a single universe of DMX without any time restriction.
The MagicDMX Full interface is aimed at Professional users wishing to have uninterrupted DMX lighting control for shows and installations. The MagicDMX Full provides a great lighting troubleshooting system.
It can be configured to either output or input a single universe of DMX, but unlike the MagicDMX Basic interface, MagicDMX Full is not time limited and can be used continuously.
MagicDMX Full outputs DMX via a 5 pin female XLR connector. If you want to use the MagicDMX interface in DMX input mode a gender reverser is required.
MagicQ Software
MagicQ software offers powerful lighting control with loads of features that lighting designers have come to rely on, such as full lighting visualisation, pixel mapping, and HD media playback on up to 8 different layers, all integrated smoothly to streamline workflows, save time, and shorten learning curves on even the most complex lighting systems.
- MagicVis Visualiser
- Magic HD Pixel-Mapper
- Morphing
- Cloning
- Patch Offsetting
- Group and Palette FX
Download Software |
The Eurolite USB-DMX 512 interface combines very small dimensions with many functions due to the internal RISC-controller. This controller creates all DMX-signals so that the pc and the USB-port is not too busy enabling the parallel use of several DMX-universes.
Eurolite USB-DMX 512 Interface features:
- USB-DMX-Interface
- Interface between notebook or pc and DMX-devices
- Tested with the following DMX lighting control software: DMX-Configurator, FreeStyler, DMXControl
- Recommended system requirements: min. Pentium 3 processor 1GHz, 128 MB RAM
- Tested operating systems: Windows XP Home, Windows XP Professional, Windows Vista, Windows7
- Power supply: 5 V DC, 500 mA via USB
- Input: USB 1.1 / USB 2.0
- DMX-output: 512 channels
- DMX-512-connection: 3-pin XLR
| The MA 2Port Node onPC allows the conversion of Ethernet data into DMX data and vice versa. In combination with grandMA2 onPC/grandMA onPC it is also possible to output DMX.
If used with grandMA2 onPC, the MA 2Port Node onPC outputs also 512 parameters of DMX (1,024 parameters as MA 2Port Node onPC PRO) and becomes a powerful show controller for smaller applications.
Also handy backup solutions for reduced budgets become possible. The MA 2Port Node onPC have integrated power supplies, but they also can be powered over Ethernet. Furthermore couplers and safety wires can be easily attached.
Two green LEDs will indicate if DMX traffic is in progress. Both, DMX LEDs and the display’s backlight, can be switched off remotely. The ‘Finder Functionality’ is a clever way to let the console indicate a selected node by flashing its backlight. In turn, a press of a button on the MA 2Port Node onPC will identify it on the console’s display.
All MA 2Port Nodes are fully integrated into the MA System. That means easy, comfortable configuration incl. in/out assignment of each node from any grandMA console or grandMA2 onPC/grandMA onPC. It’s also possible to use the nodes with other systems, because they speak MA-Net2, MA-Net and Art-Net, which can be set remotely.
The MA 2Port Nodes are also available as flush-mount versions (for EU and US in-wall boxes).
Dimensions 160 x 145 x 50 mm
Dimensions (inch) 6.3 x 5.7 x 1.9 inch
Net weight 1,1kg
Net weight (lbs) 2.3 lbs
PRICE WITHOUT V.A.T. 24% |
-
Product Features:
This DMX512 encoder options the advanced micro control unit, It can receive the DMX512 standard digital control signal which is internationally widely used It changes the signal into PWM control signal to actuate the LED lamp It can also connect the DMA digital console to change the light or each dynamic effect In addition, when the decoder is not connected with the DMA console, it can be used as a synchronous controller That is to say you can Synchronously control number of decoders and LED lights
Basic parameters:
Basic parameters
Product Name: DMX512 Decoder
Supply voltage: DC12-24V
Output channels: 3 channels (R, G, B, ) or 4 channels (R, G, B, W )
Output current: Max.8A Per Channel
Output Power 1:12V:<288W, 24V:<576W (3 channels)
Output Power 2:12V:<384W, 24V:<768W (4 channels)
Operating temperature: -20-60C
Controller size: L166*W67*H41(mm)
Box size: L176*W84*H50(mm)
Net weight: 360g
Gross weight: 408g
DMX512 standard: DMX512/1990
Control mode: button control, 512 console control
Accessories: A pair of XLR plugs
Package List:
1 * DMX Decoder
1 * Male and female XLR connectors
1 * User manual
| Signal splitting/amplification is easier now thanks to the D6 Branch from American DJ. This DMX Splitter/Amplifier allows for the easy connection to lighting units and the transmission of signals to them. Lightweight and easy to mount, functions perfectly as a transmission hub for any permanent setup or mobile entertainment system.
Do you want to manage your DMX fixtures in a more organized fashion using an easy solution? The D6 Branch from American DJ is the solution you need. The D6 Branch Splitter/Amplifier allows you to make your fixtures easy to manage. By significantly reducing your need for DMX cables in your production you make set-up easier, reduce the risk of a plug failure or tripped over wire, while also making your whole production cleaner and less cluttered.
Though lightweight, the D6 Branch is built from high quality materials making it the ideal blend of functionality, durability and portability. This unit is perfect for any club, bar, stage or mobile show looking to reduce their need for wires, decrease set-up time, and eliminate restrictions on where controllers and fixtures can be placed in relation to one another. Modernize your light show production today, go professional with the D6 Branch DMX Splitter/Amplifier from American DJ.
- 6-Way DMX Splitter & amplifier
- 1x DMX In, 6x DMX Out & 1 DMX Thru (all 3-pin XLR’s)
- Link with other D6 Branch Splitters
- Input & outputs are electrically and optically isolated from each other
- Includes two straps to securely attach to truss
- Clamp mount bracket included
- On/Off power switch
- Multi-voltage operation: AC 100-240V, 50/60Hz (IEC Socket)
- Dimensions (LxWxH): 4.75”x5”x6” / 118.5x122.5x153mm
- Weight: 2.5 lbs/ 1 kg.
|
- 2 x DMX512 universes in live mode (computer / tablet) and standalone mode
- Expandable from two to four DMX512 universes (2048 DMX channels)
- Intuitive illuminated keypad with 10 buttons for direct scene recall
- 99 Scenes on 5 zones
- USB and Ethernet for programming / control
- 16 Dry contact ports via HE20 connectors
- User-friendly, intuitive Cameo DMX software "by Daslight", free download for Windows and Mac OS X available
- Advanced triggering options (TCA)
- Smart upgrade technology (SUT)
- Live operation: 1024 channels
- Standalone operation: 1024 channels
- Software mode: Cameo D 4 / Daslight DVC 4 (fully supported)
- Operating systems: Android, iOS, Mac OS, Windows
- Inputs: Ethernet, USB-C
- Outputs: Ethernet
- Memory: microSD, SDHC (32 GB max)
- Power supply: 5 - 5.5 V DC 0.6 A
- IP protection type: IP20
- Dimensions (W x H x D): 160 x 90 x 45 mm
- Weight: 0.3 kg
- Colour: Grey
|
Reviews
There are no reviews yet.