Chauvet Nimbus Professional Dry Ice Machine

MDG Ice Fog Q Low Fog Machine 2850W

Extremely quiet, adjustable low fog output
Self-contained unit on wheels for easy transport
Compartments for accessories
Compatible with remote control timer and DMX interface
Detachable remote control and 8 m (26 ft) cable included

The quietest low fog generator on the market
Low fluid consumption (0.09 L/3 oz per minute at full output)
Can be placed closer to the action

TECHNICAL DATA
ICE FOG Compack
Fluid consumption 0.09 L (3 oz)
(per minute at full output)
Liquid CO2 type Low pressure refrigerated
Liquid CO2 consumption
(per minute) 3 L (6.8 lb) at 1500 kPa (225 psi)
Reservoir capacity 2.5 L (0.66 US gallon)
Fog colour Pure white
Particle size 0.5-4.5 microns
CO2 running time Low pressure version:
180 L (48 US gallon)
canister (DEWAR) = 70 minutes
Warm-up time (maximum) 8 minutes
Fluid type MDG Low Fog Fluid
(M.S.D.S. available on request)
Operating voltage 230 VAC, 50/60 Hz
Power consumption 2,850 W
Dimensions Total length 1.15 m
Operating length 1.71 m
Width 1.51 m
Height 67 cm
Weight 113 kg (250 lb)
Approval CE approved, CSA
and UL pending
Included Remote control ? 8 m (26 ft) 5-pin XLR
extension cable ? 2.5 m (8 ft) long x
13 cm (5 in) diameter fog output conduit
? 3 m (10 ft) insulated low-pressure
liquid CO2 input hose with gauge.

Digital technology and a new Design

The viper nt originate from the continued development and improvement of the Viper fog machine.
It unites the current digital technology with the proven technique and power of its predecessor.
New features guarantee a much more simple operation ? place and fog, reducing the amount of
time needed to set up the machine.

Features
? Control panel
The control panel with LED-display, simple symbols allow for easy operation. It also protects
the control buttons against dirt.
? Finest adjustments of the output
Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can
be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can
be produced. This enables the viper nt to be used in both small and large locations.
? DMX 512 as standard
The viper nt can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel.
The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote
(option). This connection is done with 3pin-XLR-plugs.
A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short
press at the start button makes the machine run. Therefore a permanent pressing of the start button
is unnecessary.
? Internal timer
With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes
and the output in %.

Safety
The change of the design is not only cosmetic, it also has improved safety features.
The viper nt is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke complete with
a collecting tray for fluid drips can be fixed.
Fluid
The following Look-fluids are available for the viper nt:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
Advantages
? DMX as standard, analog and stand-alone-mode
? Internal timer 
? Fog output adjustable in steps of 1% (0 - 99%)
? Continuous output
? Easy handling
? Powerful output
? Made in Germany

Technical Data:
Procedure: vaporizing fog generator
Power requirement: 1300 Watt
Voltage: 230 V / 50 Hz
              110 V / 60 Hz
Warm up time approx.  7 min.
Fluid consumption
at max. output
at continuous output: 120 ml/min.
.                                   35 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection:max. 15 m
Fogging time at Control: DMX 512
             0 ? 10 V analog
             Stand-alone-Mode
             Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
                                       Pump/Thermal switch
Dimensions (L x W x H): 470 x 230 x 240 mm
Weight without bottle: approx. 8,3 kg

JEM Air Force 2, The AF-2 is a high output fully DMX (3 + 5 pin) controllable fan. It has been designed with theme parks, stage applications and theatres in mind. With its massive power it easily projects smoke over long distances, works as a wind effect or simply converts smoke or fog into haze. Very high output, Fan speed 0 - 1,380rpm, Airflow: 6,500m³/h, Fan casing constructed from aluminum sheet for minimal weight, only 17kg!, 3 & 5 pin DMX as standard, Multifunctional controller, Very high quality sealed fan motor designed to withstand high condensation levels associated with close proximity fog, Aluminum hanging bracket allowing 360° rotation, compatible with the Omega clamp system.

1200 watt fogger with DMX

• Continuous output
• Rugged metal housing with handle, mounting bracket and safety eyelet
• Heating element with Unicore technology
• Economic temperature control of the heating element
• Adjustable timer with interval, duration and output volume, continuous output, manual activation
• Output distance: Approx. 7 m
• Control via Wireless remote control (optional); DMX; wired remote control
• For application areas such as: Party room; Clubs/dancing school; restaurants, bars and hotels
• Removable tank with level indication
• Operates on water-based fluid

Package contents

• 1 x device, 1 x user manual, 1 x mounting bracket, 1 x remote control, 2 x knurled screw, 2 x screw, 4 x washer, 1 x container, 1 x tube, 1 x filter