CRESTAUDIO PRO9200 2X12200W POWER AMPLIFIER

Discontinued

3,614.59 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Pro 9200 Application Designed with touring sound professionals in mind, the Crest Pro 200 Series power amplifiers faithfully produce high power with low distortion in an extremely lightweight economical package. Rock stable in stereo or bridged mode operation this series is engineered to exceed expectations, when powering multiple or single loudspeaker enclosures down to a […]

 

Read more

Pro 9200

Application
Designed with touring sound professionals in mind, the Crest Pro 200 Series power amplifiers
faithfully produce high power with low distortion in an extremely lightweight economical package.
Rock stable in stereo or bridged mode operation this series is engineered to exceed expectations,
when powering multiple or single loudspeaker enclosures down to a 2 ohm load.
The Pro 200 Series offer the protection that ensures safe & trouble free shows night after night.
Design Focus
The Pro 200 Series professional power amplifiers offer Crest’s renowned sonic integrity while providing
exceptionally high power ratings (6500 W bridged on the Pro 9200) in a compact, lightweight 2U package.
The Pro 200 Series amps feature Automatic Clip Limiting (ACL) to protect connected drivers; IGM
Impedance Sensing to accommodate varying impedance outputs; tunnel-cooled, high efficiency heat
sinksl and veriable-speed DC fans to limit the operating temperature and extend amplifier life.

FEATURES:
8 Ohm Stereo – 1300 W
4 Ohm Stereo – 2200 W
2 Ohm Stereo – 3250 W
8 Ohm Bridged – 6500 W
Dramatically reduced net weight
Latest generation of high speed, wide-bandwidth output devices
Twin-tunnel cooling with back-to-front air flow
Dual, rear-mounted, continuous variable-speed fans
Balanced male and femal XLR inputs with switch-configurable XLR
polarity and sensitivity selection
Speakon? and five-way binding post output connectors
Ground-lift switch
Front panel circuit breaker switch
Modular construction
Five-year warranty
Dimensions 19″ W x 3.5″ H x 12.25″ D
(483 mm x 89 mm x 312 mm)
Weight 24.1 lbs. (11 kg)

Weight 11.00 kg

Reviews

There are no reviews yet.

Be the first to review “CRESTAUDIO PRO9200 2X12200W POWER AMPLIFIER”

Your email address will not be published. Required fields are marked *

Quick Comparison

CRESTAUDIO PRO9200 2X12200W POWER AMPLIFIER removeDYNACORD L500 2X250W-4Ω POWER AMPLIFIER removeCROWN I-T9000 HD POWER AMPLIFIER 3500W 4Ω removeINTERM L-2400 AMPLIFIER 2X750W removeCROWN MA-12000i Power Amplifier 2Χ4000 Watts removeBITTNER AUDIO BASIC 800-2x400W-4Ω POWER AMPLIFIER remove
NameCRESTAUDIO PRO9200 2X12200W POWER AMPLIFIER removeDYNACORD L500 2X250W-4Ω POWER AMPLIFIER removeCROWN I-T9000 HD POWER AMPLIFIER 3500W 4Ω removeINTERM L-2400 AMPLIFIER 2X750W removeCROWN MA-12000i Power Amplifier 2Χ4000 Watts removeBITTNER AUDIO BASIC 800-2x400W-4Ω POWER AMPLIFIER remove
Image
SKUPRO9200L500I-T9000 HDL-2400MA-12000iBASIC800
Rating
Price 3,614.59 incl. GR VAT 1,070.11 incl. GR VAT 8,186.84 incl. GR VAT 1,198.00 incl. GR VAT 5,918.00 incl. GR VAT 731.60 incl. GR VAT
Stock

Out of stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Pro 9200

Application
Designed with touring sound professionals in mind, the Crest Pro 200 Series power amplifiers
faithfully produce high power with low distortion in an extremely lightweight economical package.
Rock stable in stereo or bridged mode operation this series is engineered to exceed expectations,
when powering multiple or single loudspeaker enclosures down to a 2 ohm load.
The Pro 200 Series offer the protection that ensures safe & trouble free shows night after night.
Design Focus
The Pro 200 Series professional power amplifiers offer Crest's renowned sonic integrity while providing
exceptionally high power ratings (6500 W bridged on the Pro 9200) in a compact, lightweight 2U package.
The Pro 200 Series amps feature Automatic Clip Limiting (ACL) to protect connected drivers; IGM
Impedance Sensing to accommodate varying impedance outputs; tunnel-cooled, high efficiency heat
sinksl and veriable-speed DC fans to limit the operating temperature and extend amplifier life.

FEATURES:
8 Ohm Stereo - 1300 W
4 Ohm Stereo - 2200 W
2 Ohm Stereo - 3250 W
8 Ohm Bridged - 6500 W
Dramatically reduced net weight
Latest generation of high speed, wide-bandwidth output devices
Twin-tunnel cooling with back-to-front air flow
Dual, rear-mounted, continuous variable-speed fans
Balanced male and femal XLR inputs with switch-configurable XLR
polarity and sensitivity selection
Speakon? and five-way binding post output connectors
Ground-lift switch
Front panel circuit breaker switch
Modular construction
Five-year warranty
Dimensions 19" W x 3.5" H x 12.25" D
(483 mm x 89 mm x 312 mm)
Weight 24.1 lbs. (11 kg)

The model L 500 is a 2 x 250 Watts Power Amplifier. Linear Precision Series
power amps combine excellent audio performance, modern and innovative
circuit design, meticulous and exceptionally rigid construction, and the highest
levels of operational integrity and reliability with an appropriate and more than
realistic price. The robust steel chassis provides outstanding torsional strength
through L-shaped side panels reaching under the thick aluminium front panel.
Thermal breakers prevent the power supply units from being damaged by thermal
overload. Electronically controlled fans provide sufficient front-to-rear airflow and
a special cool air diverter takes care of thermal stability. The fans? noise-level is
extremely low which provides the possibility for studio use. If necessary, a supplied
air-filter can be mounted behind the front panel ventilation louvres.
 
Features
* Excellent audio performance
* Symmetrical topology
* Ultra-low distortion
* Generously dimensioned power supply units
* Suitable to be operated on loads down to 2 ohms
* Suitable to drive complex loads with phase angles of ± 90 degree
* Extensive protection circuitry
* Unique Back-EMF protection
* Switchable limiters
* Switchable Hi/Lo-Cut filters
* Robust steel chassis
* Exceptional low noise front-to-rear air-flow
* XLR-type inputs and direct-outs
* LED display shows On, In, Out, Limit and Protect
* Highly reliable operation

Specs
* Max. Output Power - into 8 ohms : 2 x 180 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 4 ohms : 2 x 280 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 2 ohms : 2 x 320 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 8 ohms bridged : 1 x 560 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 4 ohms bridged : 1 x 640 W at 1 kHz / THD = 1.0%
* Rated Output Power - into 8 ohms : 2 x 175 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 4 ohms : 2 x 250 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 2 ohms : 2 x 300 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 8 ohms bridged : 1 x 500 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 4 ohms bridged : 1 x 600 W at 20 Hz - 20 kHz / THD = 0.1 %
* Frequency Response : 0 dB ..... -1 dB/20 Hz - 20 kHz
* Phase Angle Response : ± 30 degree/20 Hz.....20 kHz
* Maximum Output Level : 45 V / RMS before clipping, no load, ref. 1 kHz / THD = 1%
* Voltage Gain ref. 1 kHz : 26 dB (constant gain option)
* Input Sensitivity : 0 dBu/0.775 V, +6 dBu/1.55 V at rated output / 4 ohms ref. 1 kHz
* Maximum Input Level : +21 dBu / 8.7 V
* Input Impedance active balanced : 20 kohms
* THD at Rated Output : < 0.05 % MBW = 80.0 kHz, f = 1 kHz
* IMD -SMPTE : < 0.01 % 60 Hz, 7 kHz, at rated output
* Signal-to-Noise Ratio : >105 dB at rated output into 4 ohms,
   A-weighted, RMS, input sensitivity +6 dBu
* Attenuation at rated output : > 70 dB f = 1 kHz
* Damping Factor internal 1 kHz : > 300
* DIM 30 : < 0.01 %
* DIM 100 : < 0.01 %
* Slew Rate internal : > 25 V / ?s
* Power Consumption : 300 W 1/8 rated output into 4 ohms
* Width : 483 mm
* Height : 88.1 mm
* Depth : 426 mm
* Weight : 14 kg
 

Low weight switching final power amplifier. Power 2X3500W / 4Ω, 2Χ4700W / 2Ω. 7000W bridged 8Ω. New integrated BSS OMNIDRIVE 4bit / 192kHz processor with Cirus Logic SHARC A / D and D / A Converters. LevelMAX peak voltage and RMS compressing, limiting, New hi-end FIR and IIR filters, 2sec delay / channel, as well as DSP presets for various speakers. LCD display on the front panel. USB input on the front panel for loading firmware and Speakers Tunning presets. Analog inputs with XLR, digital input AES / EBU, ethernet input RJ-45 with TCP / IQ protocol. Advanced 3rd generation power supply that allows the amplifier to operate at any voltage. Cooling circuit with microprocessor control with adjustable speed depending on the temperature. Analog and digital outputs (THRU) XLR. Exits speakon 5-way binding post, ground lift switch. Made of cast aluminum, height 2U rack. Suitable for P.A applications but also permanent installations. Weight 10.5kg

L2400 750W-750W 4ohm (500W-500W 8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation.


The Crown® Macro-Tech® i Series continues the Macro-Tech legacy of unparalleled sonic accuracy and detail, putting sound quality above all else
Patented, cutting-edge Class-I circuitry gets more power out of an amplifier with less waste
Rugged construction ensures that all Macro-Techs are built to withstand years of abuse on the road
Global Power Supply — designed to deliver maximum power no matter what country you work in
Built-in load, line voltage, input and output monitoring
Standard Ethernet networking via System Architect® lets system operators monitor and control the amplifier from any location

Performance 
Frequency Response (at 1 watt, 20Hz - 20 kHz into 8 ohms) ± 0.25 dB 
Signal to Noise Ratio below rated full-bandwidth power,
A-weighted  > 108 dB 
Total Harmonic Distortion (THD) at 1 watt into 8 ohms Total Harmonic Distortion (THD) Plus Noise at full rated power Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB  Damping Factor (20 Hz to 100 Hz at 8 ohms)  > 5000 
Crosstalk (below rated power, 20 Hz to 1 kHz)  > 80 dB
Common Mode Rejection (CMR) (20 Hz to 1 kHz)  > 55 dB, typically > 70 dB
DC Output Offset (Shorted input)  Input Impedance (nominal)  10 kilohms balanced, 5 kilohms unbalanced 
Maximum Input Level  +20 dBu typical
Load Impedance (Note: Safe with all types of loads)
 Stereo: 1/2/4/8/16 ohms     Bridge Mono: 2/4/8 ohms 
Input Sensitivity (referenced to 8 ohm rated output) 1.4V, 32 dB gain, and 26 dB gain
Voltage Gain (referenced to 8 ohm rated output) MAi-5000i:
37.1 dB to 22.2 dB MAi-9000i:
37.9 dB to 23.0 dB MAi-12000i:
39.3 dB to 24.5 dB
Required AC Mains  Universal AC input, 100-240VAC , 50/60 Hz (±15%). Maximum AC mains voltage 264VAC.
AC Line Connector  Five cordsets supplied with amplifier (USA, UK, European, Australia, India)
Construction 
Cooling  Dual-zone, microprocessor controlled, continuously variable speed fans,
front-to-back airflow
Front Panel  Cast aluminum with integrated handles.
Weight 28 pounds (12.7 kg) net, 36 pounds (16.3 kg) shipping. 
Dimensions (W x H x D)  19 in. (48.3 cm) W x 3.5 in. (8.9 cm) H x 16.2 in. (41.1 cm) D.
Protection Amplifier is protected against reactive loads, faults and shorts. If one channel experiences a catastrophic failure, the entire amplifier will shut down.

4-ohm Dual (per ch): 4,000W
8-ohm Dual (per ch): 2,100W
4-ohm Bridge: 7,000W
8-ohm Bridge: 8,000W

BASIC Series - Intelligent Power

BASIC - that's meeting the tightest budgets and professional requirements
in reliability, flexibility and sound. Alone or in combination with the other
products of the Bittner portfolio.
The consequent realisation of the Bittner quality standards indicates once
more our understanding of the contracting business. It underlines our philosophy
that cost consciousness has nothing to do with giving up standards. Compromise
is a word unknown to Bittner Audio!
The incorporation of detent potentiometers, clip limiter, protection circuits for
any imaginable situation, as well as a first-class production process using only
highest-quality components made the BASIC series the choice of most contractors.

Certainly more than basic!

High Tech SMT design
Excellent sound and superior impulse response
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
XLR Inputs
Speakon and Binding Posts
Clip Limiter
Toroidal transformers
LED Indicators for SIGNAL, CLIP, PROTECT, POWER
Temperature controlled, variable speed, low noise fans
Detent potentiometers
Stereo / Bridged / Parallel Mode
Ground Lift
Robust Steel Chassis
3 Year Warranty

TECHNICAL DATA:
Basic 800:  2x 400 W @ 4 Ohm
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.03%
Signal-to-Noise Ratio: < -102 dB
Channel Seperation: > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  > 400 @ 4 Ohm
Cooling:  2x Fan (temp. reg. variable speed)
Weight:  13 kg.
Dimensions : 2 RU/483x89x265 mm (19" x 3.5" x 12.6“)

Weight11.00 kg16.00 kg10.50 kg15.60 kg12.70 kg13.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 11.00 kg
Weight 16.00 kg
Weight 10.50 kg
Weight 15.60 kg
Weight 12.70 kg
Weight 13.00 kg