CYRUS ONE linear Bookshelf speakers 20W-120W (Pair – White)

The Cyrus ONElinear is a premium loudspeaker system, which, whilst designed to perfectly augment the Cyrus ONE and ONE HD amplifier systems, provides exemplary performance with a whole host of audio systems.

The ONElinear is engineered with a classically ‘British’ linear frequency response curve. The objective is complete neutrality, allowing the full character of the music to be revealed. A loudspeaker, however, can only be truly perfected if it is known which amplifier system will be driving it. In this case, the ONElinear has been optimised for use with our own hybrid Class D amplifier topologies.

The ONElinear bass/mid driver uses a double-wound copper-coated aluminium voice-coil. As well as being light, this produces a stronger induced magnetic field and hence ‘grip’ over hard to control bass frequencies. The voice coil is bonded to a carefully profiled KEVLAR cone material. This material is light and responsive, carrying limited inertia and retaining its shape and hence audio characteristic even when pushed hard. The speed and accuracy of the resulting bass response is remarkable for a speaker of the size.

The ‘tweeter’ or treble unit is a textile soft-dome, capable of meaningful response well beyond the limits of human hearing. Refined and balanced, the high-frequencies are never ‘aggressive’ or harsh, yet retain the full detail of the source recording.

The crossover uses high quality electrolytic capacitors to maintain the signal integrity and a smooth phase response through the transition from bass driver to tweeter. This again contributes the even response.

The cabinet has been developed using advanced computer modelling with ‘Delayed Cumulative Spectral Analysis’ to reduce the contribution of cabinet noise to levels more than 35dB below the driver output. The same computer modelling is also used to fine tune the crossover to ensure a consistent performance, even when listening ‘off-axis’.

The ONElinear is rear-ported and designed to be positioned between 10-30cm from a rear wall. This will optimise the bass response and mid-range clarity, although some experimentation with position is advised as this will be room-dependent.

Nominal impedance – 8 Ω
Sensitivity (2.83V@1m) – 86 dB
Recommended amplifier power – 20 – 120 W
Frequency response (±3dB) – 50Hz-24kHz
Crossover frequency – 2.1kHz

Cabinet volume – 11l
Bass driver – 5” (125mm) Woven kevlar cone
Treble driver – 1” (25mm) soft dome
Dimensions (H x W x D) – 305 x 200 x 295 mm
Net weight – 14 kg (per pair)

Item    Value
System Format:     2 Way
Frequency Response:     55 Hz - 60 kHz
Sensitivity (1W@1M):     86 dB
Nominal Impedance:     8 ohms
Maximum S.P.L
(Per pair in room):     109.8 dBA
Power Handling (RMS):     100 W
Recommended Amplifier Requirements (RMS):     50 - 100 W
Bass Alignment:     Bass reflex. HiVe port system
Crossover Frequency:     2.3 kHz
Drive Unit Compliment:     1 x 5.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer

External Dimensions excl Stand (H x W x D)
    300 x 170 x 263 mm
(11 13/16 x 6 11/16 x 10 3/8 inch)
Weight (each) Excluding stands:     

7.5 Kg (16.5 lbs)

Frequency Response +/- 3dB:    60 Hz - 35 KHz
Sensitivity (1W@1M):    87 dB
Driver Compliment:    1 x 140mm (5 1/2“) RST® mid-bass driver
1 x 25mm (1“) C-CAM® gold dome tweeter
Nominal Impedance:    8 ohms
Maximum SPL (each):    110.8 dBA
Recommended Amplifier Requirements (RMS):    25 - 100W
Bass Alignment:    Front ported - bass reflex. HiVE®II port system
Power Handling (RMS):    100W
Crossover Frequency:    3.0kHz
External Dimensions:
(H x W x D)    250 x 140 x 140 mm
9 13/16 x 5 1/2 x 5 1/2 inch
Weight (Individual):    3.95 kg (8 3/4 lbs)

 User's Manual

 ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ

Dimensions | Metric :6-1/4” W x 6-1/2” D x 10-7/8” H | 15.9 x 16.5 x 27.6 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 5-1/4" BDSS bass/midrange drivers; One 5-1/4" pressure coupled bass radiator
Frequency Response :42 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Accessories :Two ¼ 20 insert cover plugs; Tripod base
Mounting Options :Vertically: On Shelf with included tripod base; Equipped with rear ¼ 20 sized thread to accommodate on wall/on ceiling mounting with aftermarket articulating mount (articulating mount not included); Equipped with bottom ¼ 20 sized thread to accommodate ProStand 1000 stand mounting (ProStand 1000 available separately); Equipped with keyhole mounting slot for flush mounting
Packaging :One to a carton
Weight | Metric :6.5 lbs | 2.9 kg
Warranty :5 Years

Driver Complements
Mid/Woofer     1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response     90Hz-31KHz
Lower -3dB Limit     115Hz
Upper -3dB Limit     28KHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     88 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Cabinet Size     7 3/4" H x 4 1/2" W x 5 15/16" D
(19.68cm H x 11.43cm W x 15.08cm D)
Mounting Options     Included wall mount bracket; 1/4x20 threated insert
Enclosure Type     Steel-plate reinforced curved enclosure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight     3.00 lbs. (1.36kgs)
Shipping unit:     each
Total Shipping Weight     3.70 lbs. (1.68kgs)
Speaker Warranty     5 years parts and labor (original purchaser)
Accessories (comes with)     included wall mount bracket



ALSO AVAILABLE IS WHITE COLOR

Dimensions (mounted on wall without bracket) :27" H x 6" W x 1-1/2" D (68.6cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :27" H x 6" W x 1-9/16" D (68.6cm x 15.2cm x 40mm)
Dimensions (on table stand) :30" H (76.2cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :92Hz – 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum
Product weight (without table stand) :5.1 lbs. (2.3kg)
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black