Dali Oberon 1 Bookshelf Loudspeakers 2-way (pair) LIGHT OAK

The DALI OBERON 1 is a ultra compact bookshelf speaker. The cabinet size enables an optimal balance between inner volume for bass performance and a compact appearance for easy integration - suited for smaller rooms, discreet audio setups or wall mounting. It features the same oversized 29 mm ultra-lightweight soft dome tweeter as its floor-standing siblings, and a SMC based 5.25" wood fibre woofer to handle lower midrange and bass. The OBERON 1 is based on the most innovative DALI ideas, traditions and inventions - united in a sleek compact design.

The driver materials, crossover design and geometry applied in the OBERON series has been selected to achieve a wide dispersion pattern. This ensures a well-integrated sound, even when listening at a significant off-axis angle. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion. This is why all DALI speakers are not designed to be toed-in.

The rounded edges and rustic fabric of these new DALI front grilles add a lighter and more contemporary visual look to the OBERON series. This look is enhanced by the elegantly shaped aluminium base mounted on the two floor-standing models.

The OBERON woofer features a wood fibre cone with a blend of fine grain paper pulp, reinforced with wood fibres, which creates a stiff, light-weight and well-behaving structure. In combination with a low-loss surround and spider suspension, this cone reproduces the micro details in the signal - unfiltered and with high accuracy.

The iron pole piece of the OBERON woofer magnet is crowned by a patented SMC disk - minimizing the negative effects of the iron. The use of the SMC disk greatly reduces mechanical distortion, which lowers third order distortion. This allows for a longer listening pleasure, a relaxed midrange and a surprising amount of detail for its price class.

• Frequency Range (+/-3 dB) [Hz]: 51 - 26,000
• Sensitivity (2,83 V/1 m) [dB]: 86
• Nominal Impedance [ohms]: 6
• Maximum SPL [dB]: 106
• Recommended Amplifier Power [W]: 25 - 100
• Crossover Frequency [Hz]: 2,800
• Crossover Principle: 2-way
• High frequency driver, Quantity: 1 x 29 mm
• High frequency driver, Diaphragm type: Soft Textile Dome
• Low frequency driver, Quantity: 1 X 5.25“
• Low frequency driver, Diaphragm type: Wood Fibre Cone
• Enclosure type: Bass Reflex
• Bass Reflex Tuning Frequency [Hz]: 50
• Connection Input: Single Wire
• Recommended Placement: Shelf or stand
• Recommended Distance From Wall [cm]: 1 - 50
• Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234
• Weight [kg]: 4.2
• Accessories Included: Manual, Rubber Feet, Front Grille
  

Frequency Response: 80 Hz - 35 KHz
Sensitivity (1W@1m): 87 dB
Nominal Impedance: 8 Ohms
Power Handling Single (RMS): 60 W
System Power Handling (RMS): 100 W
Recommended Amplifier Requirements: 10 - 100 W
Maximum SPL (dBA): 105
Bass Alignment: Bass reflex - rear ported
Drive Unit Complement: 1 x 100mm (4“) MMP®II cone mid-bass driver.
1 x 25mm (1“) C-CAM® gold dome tweeter
External Dimensions
(H x W x D): mm (inches) 198 x 125 x 140 mm
(7 13/16 x 4 15/16 x 5 1/2)
Weight (each):
Kg (lbs) 2 (4 3/8)

Two way, bass-reflex
Woofer 170 mm.
Polypropylene pentapolymer
Tweeter 28 mm. silk soft dome
Impedance: 6 Ohm (min. 4)
RMS POWER: 80 W
MAX POWER: 125 W
Efficiency: 88 dB/W/1 m
Dimensions: 255x350x400mm.
Net weight: 13,5 Kg.
Finish: high gloss metallized
Colors: blue, red, silver grey,
charcoal grey, racing red

Two way, bass-reflex
Woofer 130 mm. (5“)
Coated paper
Tweeter 28 mm.
Soft dome (silky fabric)
Impedance: 6 Ohm (min. 4)
RMS POWER: 80 W
MAX POWER: 120W
Efficiency: 89 dB/W/1m
Dimensions: 200x270 Weight: 7,5 Kg
Finishing:solid walnut

Driver Complements
Mid/Woofer     1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response     90Hz-31KHz
Lower -3dB Limit     115Hz
Upper -3dB Limit     28KHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     88 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Cabinet Size     7 3/4" H x 4 1/2" W x 5 15/16" D
(19.68cm H x 11.43cm W x 15.08cm D)
Mounting Options     Included wall mount bracket; 1/4x20 threated insert
Enclosure Type     Steel-plate reinforced curved enclosure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight     3.00 lbs. (1.36kgs)
Shipping unit:     each
Total Shipping Weight     3.70 lbs. (1.68kgs)
Speaker Warranty     5 years parts and labor (original purchaser)
Accessories (comes with)     included wall mount bracket



ALSO AVAILABLE IS WHITE COLOR

System Format: 2 Way
Frequency Response: 42 Hz - 60 kHz
Sensitivity (1W@1M): 88 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 112.6 dBA
Power Handling (RMS): 120 W
Recommended Amplifier Requirements (RMS): 60 - 120 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: 2.7 kHz
Drive Unit Compliment: 1 x 6.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

362 x 210 x 303 mm
(14 3/8 x 8 1/4 x 11 15/16 inch)
Weight (each) Excluding stands: 9.9 Kg (21.75 lbs)

AVAILABLE IN SIX COLOR FINISHES