• Built-in amplifiers & dynamics • HiFi Sound quality • Adjustable subwoofer level • Phase invert switch The Clubmate I has two 6,5/1″ satellites and a 12″ subwoofer with built-in amplifier. Satellites are equipped with neodymium high drivers and a special wave guide for frequencies up to 20Khz. The built-in dynamics will protect the system […]
The Clubmate I has two 6,5/1″ satellites and a 12″ subwoofer with built-in amplifier. Satellites are equipped with neodymium high drivers and a special wave guide for frequencies up to 20Khz. The built-in dynamics will protect the system and speaker drivers against overload and will give an excellent frequency response at any sound level. The set is finished with scratch resistant paint and stylish metal grills. Clubmate I is ideal for small partys schools, practice rooms and exhibitions
The Club Mate 12 & 15 together with Soundmate III are upgraded into Clubmate I, II and III systems. Besides the improved sound quality the looks are also upgraded due to stylish metal grills. Together with the new scratch resistant finish and reduced weight (10-25%) makes these sets road-proof. The Clubmate sets are especially designed for the mobile DJ’s, where a powerful bass is required as well as a smooth mid–high frequency response. The 12″ and 15″ subwoofers have a long linear cone excursion to ensure minimal distortion and high power levels as well as getting a higher maximum sound pressure. Special attention is given to the power ratings of the subwoofers and satellites as well as the behaviour of all the independent dynamic compressors and limiter circuits inside. The club mate sets are easy to set-up also for non-technical users.
Specifications Subwoofer:
Amplifier output low: 350W RMS at 8 Ohm
Amplifier output high: 2x 120W RMS at 8 Ohm
Freq. Response (-3 dB): 47- 125Hz
Crossover Frequency: 125 Hz, 24 dB/Oct BW
Efficiency (Half Space): 100 dB / W / m
Peak. SPL at 1 m (Theoretical): 125.4 dB
S/N Ratio: >100dB
Nominal Dispersion (HxV): 360° x 180°
Dimensions (WxHxD): 450 x 510 x 600 mm
Weight 26.0 kg
Satellites:
Drivers: 6,5″ / 1“
Freq. Response (-3 dB): 125-20.000Hz
Crossover Frequency: 3300 Hz, 12 dB/Oct
Efficiency (Full Space): 95 dB / W / m
Peak. SPL at 1 m (Theoretical): 115.8 dB
Nominal Dispersion (HxV): 90° x 60°
Dimensions (WxHxD): 240 x 388 x 245 mm
Weight: 6,4 kg
Weight
6.40 kg
Reviews
There are no reviews yet.
Be the first to review “DAP AUDIO D3263 Club Mate I 12″ Compact active speaker set” Cancel reply
The Clubmate I has two 6,5/1" satellites and a 12" subwoofer with built-in amplifier. Satellites are equipped with neodymium high drivers and a special wave guide for frequencies up to 20Khz. The built-in dynamics will protect the system and speaker drivers against overload and will give an excellent frequency response at any sound level. The set is finished with scratch resistant paint and stylish metal grills. Clubmate I is ideal for small partys schools, practice rooms and exhibitions
The Club Mate 12 & 15 together with Soundmate III are upgraded into Clubmate I, II and III systems. Besides the improved sound quality the looks are also upgraded due to stylish metal grills. Together with the new scratch resistant finish and reduced weight (10-25%) makes these sets road-proof. The Clubmate sets are especially designed for the mobile DJ's, where a powerful bass is required as well as a smooth mid–high frequency response. The 12" and 15" subwoofers have a long linear cone excursion to ensure minimal distortion and high power levels as well as getting a higher maximum sound pressure. Special attention is given to the power ratings of the subwoofers and satellites as well as the behaviour of all the independent dynamic compressors and limiter circuits inside. The club mate sets are easy to set-up also for non-technical users.
Specifications Subwoofer:
Amplifier output low: 350W RMS at 8 Ohm
Amplifier output high: 2x 120W RMS at 8 Ohm
Freq. Response (-3 dB): 47- 125Hz
Crossover Frequency: 125 Hz, 24 dB/Oct BW
Efficiency (Half Space): 100 dB / W / m
Peak. SPL at 1 m (Theoretical): 125.4 dB
S/N Ratio: >100dB
Nominal Dispersion (HxV): 360° x 180°
Dimensions (WxHxD): 450 x 510 x 600 mm
Weight 26.0 kg
Satellites:
Drivers: 6,5" / 1“
Freq. Response (-3 dB): 125-20.000Hz
Crossover Frequency: 3300 Hz, 12 dB/Oct
Efficiency (Full Space): 95 dB / W / m
Peak. SPL at 1 m (Theoretical): 115.8 dB
Nominal Dispersion (HxV): 90° x 60°
Dimensions (WxHxD): 240 x 388 x 245 mm
Weight: 6,4 kg
All-in-one column speaker for PA and monitor applications
1,000 watts peak Class-D system power offer high performance with a low weight
Powerful bass reproduction with 3 x 6.5" woofers
Balanced mids thanks to the 8 x 3" full-range speakers
Precise and silky highs with 2 x 1" high frequency drivers
Increased range and wider coverage through the array arrangement
Homogeneous dispersion pattern through a BEM-optimised tweeter wave guide
Distortion-free sound even at the highest volume thanks to LD Systems DynX® DSP technology
Full control through a 4-channel mixer including Bluetooth® Stereo Audio Streaming
Two-piece column for compact transport
Secure plug-and-play connection thanks to the wireless multi-pin mechanism
A wide range of application options through dismountable columns
Easy operation with presets for mono or stereo configuration
Extensive and smart accessories for installation and transport
A complete sound system that you can carry together with your instrument: introducing the MAUI 11 G2. The two column elements in the padded shoulder bag, the subwoofer in one hand and the guitar or keyboard in the other - and off you go! Setting up the complete system, which doubles as a PA and monitor system is just as easy thanks to the special multi-pin cable plugs. The compact and elegant MAUI 11 G2 offers an unbeatable sound quality and wide-ranging sound distribution. It was developed after years of experience in the design of the column systems as a user-friendly solution for small to medium-sized gigs and fixed installations.
The MAUI 11 G2 is equipped with three 6.5" woofers, eight 3" full-range speakers and two 1" neodymium HF drivers. They are driven by a light Class-D power amplifier boasting 1,000 watts of peak power and producing a grunty bass, balanced mids and precise and silky highs. The DynX® DSP technology from LD Systems provides top-class performance each time and the highest level of freedom from distortion. It includes a multiband limiter which protects against overloading, an EQ, a compressor and a 3-way-crossover with run time correction.
The design of the MAUI 11 G2 line array achieves a longer range, increased resistance to feedback and a wider space coverage, which makes separate monitor speakers superfluous. The wave guide of the tweeters has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves an homogeneous dispersion - Your audience hears you in the back row just as clearly as in the front.
With the integrated 4-channel mixer, system presets for mono or stereo configuration and Bluetooth® Audio Streaming, you have full control over the system. Whether you are a singer-songwriter, solo entertainer or DJ, you will be thrilled with the extraordinary sound and portability of the MAUI 11 G2. The column and the subwoofer can be set up separately: thus, the system is extremely flexible and is also an excellent choice for fixed installations. With a selection of clever transport accessories and special mounting hardware, the MAUI 11 G2 is a well thought out overall solution, down to the last details.
Product type
PA Complete Systems
Type
active
Colour
Black
Max. SPL (peak)
124 dB
Frequency response
50 - 20000 Hz
Dispersion (H x V)
120° x 20 °
Overall height
2030 mm
Weight
24,9 kg
Woofer characteristics
Low/mid driver dimensions
3 x 6.5 "
Woofer size
3 x 165.1 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
1.5 "
Woofer voice coil (mm)
38.1 mm
Cabinet construction
vented
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Subwoofer width
285 mm
Subwoofer height
650 mm
Subwoofer depth
373 mm
Subwoofer weight
16.9 kg
Mid/Hi System
Midrange size
8 x 3 "
Midrange size
8 x 76.2 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Midrange voice coil
1 "
Midrange voice coil
25.4 mm
Horn
Waveguide
Tweeter dimensions
2 x1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Neodymium
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25.4 mm
Loudspeaker inputs
1
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
aluminium
Mid/Hi system cabinet surface
HD coating
Mid/Hi system width
96 mm
Mid/Hi system height
620 / 730 mm
Mid/Hi system depth
104 mm
Mid/Hi system weight
5.4 / 2.6 kg
Amplifier module (integrated in subwoofer)
Amplifier
Class D
Amplifier output system (RMS)
500 W
Amplifier output system (peak)
1000 W
Protection circuits
DC protection , Multiband limiter , short circuit , thermal overload
Cooling
Convection
Operating Temperature
0 - 40 °C
Humidity Range
10% to 80%, (non-condensing)
Controls
Bluetooth switch , Hi-Z Level , Line level , Main level , Mono/stereo switch , MP3/Bluetooth Level , Power , Sub level
Indicators
Limit , mono , On , Protect (protection circuit engaged) , Setup , Signal , stereo
Power connector
IEC power cable (included)
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Power consumption Off / On / Max.
0/11/600 W
Line inputs
2 x stereo
Line input connectors
RCA , XLR/6.3 mm jack
Line outputs
1 x direct out
Line output connectors
XLR
Mic inputs
1
Mic inputs
XLR/6.3 mm jack
MP3 inputs
1
MP3 input connectors
3.5 mm jack
Hi-Z inputs
1
Hi-Z input connectors
6.3 mm jack
Loudspeaker outputs
1
Speaker output connections
Custom-made multipin
DSP characteristics
Bit depth AD/DA converter
24 bit
Internal sampling frequency
48 kHz
Signal/noise ratio
100 dB
Compact Column A System with Mixer and Bluetooth black
All-in-one column speaker for PA and monitor applications
2,000 watts peak Class-D system power offer high performance with a low weight
Powerful bass reproduction with 2 x 8" woofers
Balanced mids thanks to the 16 x 3" full-range speakers
Precise and silky highs with 2 x 1" high-frequency drivers
Increased range and wider coverage through the array arrangement
Homogeneous dispersion pattern through a BEM-optimised tweeter wave guide
Distortion-free sound even at the highest volume thanks to LD Systems DynX® DSP technology
Full control through a 4-channel mixer including Bluetooth® Stereo Audio Streaming
Two-piece column for compact transport
Secure plug-and-play connection thanks to the wireless multi-pin mechanism
A wide range of application options through dismountable columns
Easy operation with presets for mono or stereo configuration
Extensive and smart accessories for installation and transport
A complete sound system that you can carry together with your instrument: introducing the MAUI 28 G2. The two column elements in the padded shoulder bag, the subwoofer in one hand and the guitar or keyboard in the other - and off you go! Setting up the complete system, which doubles as PA and monitor system is just as easy thanks to the special multi-pin cable plugs. The compact and elegant MAUI 28 G2 offers an unbeatable sound quality and wide-ranging sound distribution. It was developed with year-long experience in the design of the column systems as a user-friendly solution for medium sized gigs and fixed installations.
The MAUI 28 G2 is equipped with two 8" woofers, sixteen 3" full-range speakers and two 1" neodymium HF drivers. They are driven by a light Class-D power amplifier with an enormous 2,000 watts peak power and produce a grunty bass, balanced mids and precise and silky highs. The DynX® DSP technology from LD Systems provides a top-class performance every time and the highest level of freedom from distortion. It includes a multiband limiter which protects against overloading, an EQ, a compressor and a 3-way crossover with run time correction.
The design of the MAUI 28 G2 line array achieves a longer range, increased resistance to feedback and a wider space coverage, which makes separate monitor speakers superfluous. The wave guide of the tweeters has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves an homogeneous dispersion - Your audience hears you in the back row just as clearly as in the front.
With the integrated 4-channel mixer, system presets for mono or stereo configuration and Bluetooth® Audio Streaming, you have full control over the system. Whether you are a singer-songwriter, solo entertainer, DJ or musician in a small band, you will be thrilled with the extraordinary sound and portability of the MAUI 28 G2. The column and the subwoofer can be set up separately: thus, the system is extremely flexible and is also an excellent choice for fixed installations. With a selection of clever transport accessories and special mounting hardware, the MAUI 28 G2 is a well thought out overall solution, down to the last details.
Product type
PA Complete Systems
Type
active
Colour
Black
Max. SPL (peak)
126 dB
Frequency response
45 - 20000 Hz
Dispersion (H x V)
120° x 20 °
Overall height
2059 mm
Weight
30,9 kg
Woofer characteristics
Low/mid driver dimensions
2 x 8 "
Woofer size
2 x 203 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Cabinet construction
vented
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Subwoofer width
370 mm
Subwoofer height
484 mm
Subwoofer depth
480 mm
Subwoofer weight
19.7 kg
Mid/Hi System
Midrange size
16 x 3 "
Midrange size
16 x 76.2 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Midrange voice coil
1 "
Midrange voice coil
25.4 mm
Horn
Waveguide
Tweeter dimensions
2 x 1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Neodymium
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25.4 mm
Loudspeaker inputs
1
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
aluminium
Mid/Hi system cabinet surface
HD coating
Mid/Hi system width
96 mm
Mid/Hi system height
780 / 795 mm
Mid/Hi system depth
104 mm
Mid/Hi system weight
5.6 / 5.6 kg
Amplifier module (integrated in subwoofer)
Amplifier
Class D
Amplifier output system (RMS)
1000 W
Amplifier output system (peak)
2000 W
Protection circuits
DC protection , Multiband limiter , short circuit , thermal overload
Cooling
Convection
Operating Temperature
0 - 40 °C
Humidity Range
10% to 80%, (non-condensing)
Controls
Bluetooth switch , Hi-Z Level , Line level , Main level , Mono/stereo switch , MP3/Bluetooth Level , Power , Sub level
Indicators
Limit , mono , On , Protect (protection circuit engaged) , Setup , Signal , stereo
Power connector
IEC power cable (included)
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
The DAVE 15 G3 is a powerful active compact system. A bass reflex subwoofer with a 15" driver constitutes the massive, powerful foundation. The satellites with 8" drivers and HF horns are responsible for a natural sounding, assertive midrange and transparent treble. The subwoofer incorporates a 2.1 power amp module that drives the components of the DAVE 15 G3 with 2800W of Peak power.
The LD LECC DSP digital processor ensures perfectly tuned functioning of the system. It includes specially amplitude and low-latency optimised crossovers, separate equalisers and limiters for the bass, mid, and treble frequency ranges, and a dynamic compressor that controls the subwoofer according to volume and provides for increased punch at low volumes.
The thoroughly professional features of the DAVE 15 G3 active PA system include sturdy multiplex cabinets, all important protection circuits, RCA, XLR/jack combo and Speakon-compatible connectors, and ergonomically shaped, recessed handles. The LD "Evolutive" handles of the subwoofer are especially worthy of mention: the innovative design with a metal ring handle permits secure, convenient handling from all sides. For accurate vertical orientation, the speaker supports of the satellites are vertically adjustable by ± 13,5° max. in seven increments.
Speaker protection covers and a castor board with a lashing strap for simple transport are available as accessories. Matching speaker stands, spacer tubes, and mounting forks are also available separately.
Like all systems in the DAVE series, the DAVE 15 G3 is suitable for portable use and for permanent installation.
Product type
PA Complete Systems
Colour
Black
Max. SPL (continuous)
121 dB
Max. SPL (peak)
132 dB
Frequency response
35 - 19000 Hz
Dispersion (H x V)
90 x 40 °
Weight
60,9 kg
Subwoofer
Low/mid driver dimensions
15 "
Woofer size
381 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
3 "
Woofer voice coil (mm)
76.2 mm
Cabinet construction
vented
Cabinet material
18 mm Plywood
Cabinet surface
texture paint
Subwoofer width
480 mm
Subwoofer height
570 mm
Subwoofer depth
635 mm
Subwoofer features
LD Systems "Evolutive" handles , threaded flange M20
Mid/Hi System
Midrange size
8 "
Midrange size
203.2 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Midrange voice coil
1.5 "
Midrange voice coil
38.1 mm
Horn
CD horn
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25.4 mm
Mid/Hi system impedance
4 Ohm(s)
Loudspeaker inputs
1
Speaker input connections
Speakon compatible
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
15 mm Plywood
Mid/Hi system cabinet surface
texture paint
Mid/Hi system width
275 mm
Mid/Hi system height
430 mm
Mid/Hi system depth
260 mm
Mid/Hi system features
ergonomically shaped insert handles , SM707 stand mount 36 mm
Amplifier module (integrated in subwoofer)
Amplifier
Class A/B
Amplifier output system (RMS)
700 W
Amplifier output system (peak)
2800 W
Protection circuits
limiter , overload , short circuit
Cooling
volume-controlled fan
Controls
Power , Sub level , Subwoofer Phase Reverse , volume
Indicators
Limit , on/off , Protect (protection circuit engaged) , Signal
The new LD Systems DAVE 8XS is a portable 2.1 multimedia system with a high-performance 8" band pass subwoofer and two satellites (each 4" + 1“, with silk dome).
The system provides crystal-clear sound and was specifically designed for multimedia applications such as home PA or gaming; it is also suitable as a monitor for DJs or keyboardists or as a music system for smaller venues such as bars and cafés. The high-performance A/B amplifier built into the subwoofer provides for both the subwoofer and the satellites. The multimedia system LD DAVE 8XS has line inputs in XLR and RCA format and is equipped with all standard protections. The built-in limiter keeps the system safe from overload and ensures a long service life. On the side of the subwoofer, in addition to an ON/OFF switch and a phase reverse switch (180°), there is a separate subwoofer volume knob that allows you to find the perfect mix of brilliant treble, punchy mids, and powerful bass.
From serial number 130818000001, the satellite speakers are equipped with a 16 mm flange and are therefore compatible with the speaker stands from LDDAVE8SET2.
Product type
PA Complete Systems
Colour
Black
Max. SPL (continuous)
117 dB
Frequency response
45 - 19.000 Hz
Dispersion (H x V)
60 x 60 °
Weight
29 kg
Subwoofer
Low/mid driver dimensions
8 "
Woofer size
203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Cabinet construction
Bandpass
Cabinet material
15 mm MDF
Cabinet surface
texture paint
Subwoofer width
352 mm
Subwoofer height
430 mm
Subwoofer depth
434 mm
Mid/Hi System
Midrange size
2 x 4 "
Midrange size
2 x 101.6 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Mid/Hi system impedance
4 Ohm(s)
Loudspeaker inputs
1
Speaker input connections
Speakon compatible
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
12 mm MDF
Mid/Hi system cabinet surface
texture paint
Mid/Hi system width
144 mm
Mid/Hi system height
350 mm
Mid/Hi system depth
170 mm
Mid/Hi system features
16 mm flange , 2 x M6 mounting points for wall mounting
The new LD Systems DAVE 8XS is a portable 2.1 multimedia system with a high-performance 8" band pass subwoofer and two satellites (each 4" + 1“, with silk dome).
The system provides crystal-clear sound and was specifically designed for multimedia applications such as home PA or gaming; it is also suitable as a monitor for DJs or keyboardists or as a music system for smaller venues such as bars and cafés. The high-performance A/B amplifier built into the subwoofer provides for both the subwoofer and the satellites. The multimedia system LD DAVE 8XS has line inputs in XLR and RCA format and is equipped with all standard protections. The built-in limiter keeps the system safe from overload and ensures a long service life. On the side of the subwoofer, in addition to an ON/OFF switch and a phase reverse switch (180°), there is a separate subwoofer volume knob that allows you to find the perfect mix of brilliant treble, punchy mids, and powerful bass.
From serial number 130818000001, the satellite speakers are equipped with a 16 mm flange and are therefore compatible with the speaker stands from LDDAVE8SET2.
Product type
PA Complete Systems
Colour
white
Max. SPL (continuous)
117 dB
Frequency response
45 - 19000 Hz
Dispersion (H x V)
60 x 60 °
Weight
29 kg
Subwoofer
Low/mid driver dimensions
8 "
Woofer size
203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Cabinet construction
Bandpass
Cabinet material
15 mm MDF
Cabinet surface
texture paint
Subwoofer width
352 mm
Subwoofer height
430 mm
Subwoofer depth
434 mm
Mid/Hi System
Midrange size
2 x 4 "
Midrange size
2 x 101.6 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Mid/Hi system impedance
4 Ohm(s)
Loudspeaker inputs
1
Speaker input connections
Speakon compatible
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
12 mm MDF
Mid/Hi system cabinet surface
texture paint
Mid/Hi system width
144 mm
Mid/Hi system height
350 mm
Mid/Hi system depth
170 mm
Mid/Hi system features
16 mm flange , 2 x M6 mounting points for wall mounting , Grilles for satellites included
Amplifier module (integrated in subwoofer)
Amplifier
Class A/B
Amplifier output system (RMS)
350 W
Amplifier output system (peak)
1400 W
Protection circuits
limiter , overload , short circuit
Cooling
Aluminium heat sink
Controls
Power , Sub level , Subwoofer Phase Reverse , volume
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
User´s Manual
Reviews
There are no reviews yet.