| Content |
For those wo are familiar with the –stage-environment" know the problem: cables all over the place! Specially around drums or the keyboards you probably will find a –cable-spagetti“: all lines going directly to the main stagewheel to get connected to the mixingconsole. The best and simpliest way to solve this problem is to use the so-called Stagesnakes. A stage-snake is best discribed as a sub-multicable, which is connected to the main multicable (Stagewheel) and gives you a more clean and ordered look and configuration on stage and behind the scenes. Note that a stagesnake has no –return" from the mixer on the box. There are several models available from DAP-audio. |
Front panel, 2 Modules wide.
Punched for DIN circuit breaker x 3.
Material: 1.2mm/0.047" Steel
Weight: 0.13Kg/0.29Lb
Front 3x DIN circuit breaker module
- Width 2 modules
- Height 4U
- Note
- 1 Module = 44mm
- 1U (unit) = 44.5mm
- To construct a 19" rack enclosure a width of 10 modules is required
- Body Colour: Black
- Rack U Height: 4
| 32-channel multicore with permanently attached 30-metre cable terminating in Adam Hall XLR plugs. The all-metal stage box has a solid strain relief in the transitional area between box and cable. The protruding sides optimally protect the sockets on the stage box against damage. With a built-in handle for ease of handling and prepared mounting possibilities for permanent installation. The additionally reinforced transition to the terminations prevents fatigue and cable breakage. For 24 send and eight return paths.
Product type
Pre-assembled Cables
Type
Multicore cable
Channels
32
Pin-out
24/8
Length
30 m
Colour
Black
Cable diameter
24.7 mm
Cross section
0.314 mm²
Connector 1-A (built into drum / stage box)
XLR
Number of connectors connector 1-A
24
Gender of connector 1-A
female
Poles of connector 1-A
3
Contacts of connector 1-A
Nickel-silver
Manufacturer of connector 1-A
Adam Hall
Model number connector 1-A
Custom-made
Connector 1-B (built into drum / stage box)
XLR
Number of connectors connector 1-B
8
Gender of connector 1-B
male
Poles of connector 1-B
3
Contacts of connector 1-B
Nickel-silver
Manufacturer of connector 1-B
Adam Hall
Model number connector 1-B
Custom-made
Connector 2-A (splice)
XLR
Number of connectors connector 2-A
24
Gender of connector 2-A
male
Poles of connector 2-A
3
Contacts of connector 2-A
Nickel-silver
Manufacturer of connector 2-A
Adam Hall
Model number connector 2-A
Custom-made
Connector 2-B (splice)
XLR
Number of connectors connector 2-B
8
Gender of connector 2-B
female
Poles of connector 2-B
3
Contacts of connector 2-B
Nickel-silver
Manufacturer of connector 2-B
Adam Hall
Model number connector 2-B
Custom-made
Splice length
60 cm
Width
180 mm
Height
90 mm
Depth
385 mm | Eight-channel subcore with permanently attached fifteen-metre cable terminating in eight Adam Hall XLR plugs. The especially compact, trapezoidial metal stage box has a solid metal strain relief and protects the sensitive transtion zone between box and cable. The additionally reinforced transition to the terminations prevents fatigue and cable breakage.
Product type
Pre-assembled Cables
Type
Multicore cable
Channels
8
Length
15 m
Cable diameter
13 mm
Colour
Black
Cross section
0.314 mm²
Connector 1 (built into drum / stage box)
XLR
Number of connectors connector 1
8
Gender of connector 1
female
Poles of connector 1
3
Connector 2 (splice)
XLR
Number of connectors connector 2
8
Gender of connector 2
male
Poles of connector 2
3
Model number connector 2
Custom-made
Splice length
60 cm
Width
140 mm
Height
80 mm
Depth
130 mm |
Stage box of 16 XLR inputs - 4 XLR outputs with 25m cable.
|
Front panel, 1 Module wide.
Punched for snap-in IEC-female x 4.
Material: 1.2mm/0.047" Steel
Weight: 0.055Kg/0.12Lb ![40719_20_msb_panel]( "40719_20_msb_panel")
|
Reviews
There are no reviews yet.