| Content |
This 2-way passive full range studio monitor loudspeaker which incorporates
an 8? low frequency transducer and a 0.75 inch aluminium dome high frequency
transducer. The system's low frequency driver is mounted as a direct radiator
in a bass-reflex cabinet constructed of MDF wood, with solid Iroko side panels.
The tuning port is located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure. The acoustically
transparent cloth grille system is detachable.
FEATURES:
2-way near/mid-field studio monitor
8" low frequency speaker
1" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
125 W power handling
SPECIFICATIONS:
RMS (Average) Power HandlingR:125 W
Program Power HandlingP:250 W
Peak Power HandlingK: >500 W
Recommended Amplifier:125 W to 250 W at 8 Ω
On-axis Frequency RangeF:38 Hz - 33 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI:3.2 Ω (at 15 kHz)
On-axis Sensitivity 1W / 1 mS: 89 dB SPL
Rated Peak SPL at Full Power: 116 dB
Nominal -6 dB BeamwidthsB:120° Horizontal
(average, 500 Hz to 8 kHz) 95° Vertical
Enclosure Material:MDF with Iroko wood side panels
Color:Black/Iroko wood
Connectors:Binding posts
Dimensions (H x W x D):42 x 28 x 29 cm(16.5 x 11 x 11.5 in)
Mounting:2 x M6 points
Weight: 12.8 kg (28 lbs)
Shipping Weight: 14 kg (31 lbs) | Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 18 S
Description High-power-capacity 18" subwoofer with high-quality
Description crossover for powerful low-end kick
Power handling capacity RMS: 500 W
Power handling capacity Program: 1000 W
Frequency response within +/-3dB 48 Hz ? 150 Hz (internal wedge)
Frequency response @ -10dB 38 Hz ? 150 Hz (internal wedge)
Speaker 1 x 18“
Impedance 4 Ohm
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 129 dB
Crossover frequency 150 Hz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Dimensions (WxHxD) 53 cm x 61 cm x 64 cm
Dimensions (WxHxD) 20 3/4? x 24? x 25 1/4?
Weight 41.6 kg
Weight 91.52 lbs |
One 1" pure aluminum dome tweeter.
Two 5-1/4" BDSS cast basket drivers pressure coupled
to one 6“x12" low bass radiator.
Freq. Response: 30 Hz - 30 kHz.
Impedance: 8 Ohms.
Sensitivity: 92 dB.
Rec. Ampl. Power: 20 - 300 watts.
Inputs: Bi-amp/bi-wire 5 way binding post terminals.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim.
Dimensions: 41.2 x 20 x 38.4 cm.
Weight: 9.9 kg each.
| Behringer DI-400P High-Performance Passive Direct Injection Box
Introducing the Ultra-Compact DI-Boxes from BEHRINGER
There are times when you will want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. A direct connection between audio equipment can be a challenge though: technical problems crop up that?ll corrupt the signal.
The DI400P lets you connect instruments or amplifier outputs. It converts any unbalanced signal to a balanced signal and eliminates unwanted noise. With its high-performance transformer, it also allows you to use very long cables without the loss of high frequencies.
This is the sort of medicine that?ll cure headaches in your studio or on stage. |
The Monitor 6 is a 2-way passive full range studio monitor
loudspeaker which incorporates a 6.5 inch cone low frequency
transducer and a 0.75 inch aluminium dome high frequency
transducer. The system?s low frequency driver is mounted
as a direct radiator in a bass-reflex cabinet constructed of
MDF wood, with solid Iroko side panels. The tuning port is
located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure.
The acoustically transparent cloth grille system is detachable.
FEATURES:
2-way near field studio monitor
6.5" low frequency speaker
.75" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
100 W power handling
SPECIFICATIONS:
RMS (Average) Power HandlingR:100 W
Program Power HandlingP: 200 W
Peak Power HandlingK: >400 W
Recommended Amplifier: 100 W to 200 W at 8 Ω
On-axis Frequency RangeF: 44 Hz - 40 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI: 7.2 Ω (at 174 Hz)
On-axis Sensitivity 1W / 1 mS: 85 dB SPL
Rated Peak SPL at Full Power: 111 dB
Nominal -6 dB BeamwidthsB:125° Horizontal
(average, 500 Hz to 8 kHz) 106° Vertical
Enclosure Material: MDF with Iroko wood
Color: Black/Iroko wood
Connectors: Binding posts
Dimensions (H x W x D): 34 x 23 x 27 cm (13.5 x 6.5 x 10.5 in)
Mounting: 2 x M6 points
Weight: 6.9 kg (15.2 lbs)
Shipping Weight: 8.1 kg (18.8 lbs)
|
The vented SUB 18 and SUB 28 direct radiators have been designed for subwoofer use in active multiway systems. The superior transient response of the classic bass reflex construction is also well suited for medium to large bass arrays. The premium 700W RMS long excursion woofers feature extremely low THD, and the reliable, all-electronic Voice Coil Tracking Protection prevents thermal overload of the 100mm sandwich voice coils. For maximum dynamics, the SUB models can be driven by extremely powerful amplifiers; thermal overload triggers a virtually inaudible 'soft' power reduction.
Order-# D113129 Cabinet Subwoofer Configuration Vented Direct Radiator Nominal Impedance 8 ohms Rated Power RMS 700 watts Program Power 1400 watts Peak Power 2800 watts SPL 2,83 V/1m 98 dB max. SPL 1m (calc. with Peak) 132 dB Freq. Range (-10 dB) 35Hz - 700Hz Passive X-Over Frequency Hi-Cut VCT Protections yes Components LOW LFS 18700 Order-# D366304 Connectors SPEAKON 2x NL 4MPR 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF --- Pin Wiring Biamped LF --- Dimensons (WxHxD) mm 505x 805x 570 Net Weight 49 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel
|
Reviews
There are no reviews yet.