dB Technologies AEB CD-01-08-36 Driver for FlexSys, DVX, Opera 401200002A

Original price was: €124.00.Current price is: €101.68. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
  • 1.75-inch Diaphragm, 1-inch Exit Throat / Polyester Compression Driver
  • 100W continuous program power handling
  • Frequency range: 1200Hz – 20kHz
  • 2-slot optimized geometry phase plug
  • Polyester diaphragm
  • Vented suspension system
  • Compact ceramic magnet assembly
  • 1.75-inch Diaphragm, 1-inch Exit Throat / Polyester Compression Driver
  • 100W continuous program power handling
  • Frequency range: 1200Hz – 20kHz
  • 2-slot optimized geometry phase plug
  • Polyester diaphragm
  • Vented suspension system
  • Compact ceramic magnet assembly

 

Read more

DBTechnologies Model: 401200002A, AEB CD-01-08-36, bolt-on, 1 inch throat, compression driver removed working from Flexsys F12.

DB FL10, FLEXSYS F12, FLEXSYS F15, FLEXSYS F315, DVX D8, OPERA 402D, OPERA 405D, ARENA 12, ARENA 15, OPERA LIVE 405, M12-4 PLUS and others.

Replacement diaphragm code ND1411, M8

made in Italy.

Weight 1.35 kg
Dimensions 137 × 137 × 80 cm

Reviews

There are no reviews yet.

Be the first to review “dB Technologies AEB CD-01-08-36 Driver for FlexSys, DVX, Opera 401200002A”

Your email address will not be published. Required fields are marked *

Quick Comparison

dB Technologies AEB CD-01-08-36 Driver for FlexSys, DVX, Opera 401200002A removeB & C Speakers WG-400 8Ω, 50W Nominal / 110W continuous,108,5dB 1W/1M removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeJBL 2450J NEODYMIUM DRIVER 4' 150W 16Ω removeB & C Speakers DE-200 Driver 1" 40W, 108,5dB 8 Ohm removeJBL 2426 COMPRESSION DRIVER 1,5" 70W 16Ω remove
NamedB Technologies AEB CD-01-08-36 Driver for FlexSys, DVX, Opera 401200002A removeB & C Speakers WG-400 8Ω, 50W Nominal / 110W continuous,108,5dB 1W/1M removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeJBL 2450J NEODYMIUM DRIVER 4' 150W 16Ω removeB & C Speakers DE-200 Driver 1" 40W, 108,5dB 8 Ohm removeJBL 2426 COMPRESSION DRIVER 1,5" 70W 16Ω remove
Image401200002a aeb-cd-01-08-36 db technologies driver high opera arena flexsys
SKUX-DBT00035WG-400DE-162450JDE-2002426J
Rating
Price Original price was: €124.00.Current price is: €101.68. incl. GR VAT Original price was: €271.56.Current price is: €243.99. incl. GR VAT Original price was: €120.00.Current price is: €99.20. incl. GR VAT Original price was: €1,550.00.Current price is: €1,465.00. incl. GR VAT Original price was: €137.63.Current price is: €124.00. incl. GR VAT Original price was: €520.79.Current price is: €479.00. incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderOnly 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • 1.75-inch Diaphragm, 1-inch Exit Throat / Polyester Compression Driver
  • 100W continuous program power handling
  • Frequency range: 1200Hz - 20kHz
  • 2-slot optimized geometry phase plug
  • Polyester diaphragm
  • Vented suspension system
  • Compact ceramic magnet assembly
Content
DBTechnologies Model: 401200002A, AEB CD-01-08-36, bolt-on, 1 inch throat, compression driver removed working from Flexsys F12. DB FL10, FLEXSYS F12, FLEXSYS F15, FLEXSYS F315, DVX D8, OPERA 402D, OPERA 405D, ARENA 12, ARENA 15, OPERA LIVE 405, M12-4 PLUS and others. Replacement diaphragm code ND1411, M8 made in Italy.
Line Array optimized Waveguide
140° max horizontal coverage
100 W continuous program power capacity
44 mm (1.7 in) aluminium voice coilm (3 in) aluminium voice coil
Polyimide diaphragm
1200 – 18000 Hz response
108.5 dB sensitivity
Compact Neodymium magnet assembly
DE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, neodymium rare-earth magnet assembly, 16Ω
100 W continuous program power capacity
1” horn throat diameter
44 mm (1.7 in) aluminium voice coil
Titanium diaphragm
1000 – 18000 Hz response
106 dB sensitivity

70W AES compression driver, 1.75 διάφραγμα τιτανίου, 16Ω

The model 2426H is a professionalquality high frequency compressiondriver which incorporates JBL'stitanium diamond diaphragm. Thistitanium diamond structure combinesthe ruggedness of phenolic andcomposite-type diaphragms with theoutstanding frequency response offragile aluminum and exotic metaldiaphragms.

JBL's exclusive suspension, consistingof a three-dimensional diamondpattern, reduces bendingstresses in the diaphragm supportstructure. The depth of the diamondpattern is closely controlled toprovide predictable frequencies forthe 2nd and 3rd normal resonancemodes and for the basic suspensionresonance.

The mathematically determinedphasing plug consists of concentricexponential horns to minimize phasecancellations. Phasing plug, throat exittube and diaphragm assemblies areidentical to the previous model.

All cast parts and tolerances are held to the same levels traditionally associated with JBL designs. Additionally the press-fit assembly and interlocking parts assure greater resistance to the mechanical shock. Diaphragm assemblies are rim centered rather than pin mounted, for instant interchange ability and ease of field service.Mounting is provided for standard25 mm (1 in) three bolt pattern. The front snout may be removed(unscrewed) to allow standard 1 3/8" -18 screw mounting. Through holes for external attachment points are also provided. A machined ring of copper surrounds the pole piece to counteract the inductance of the voice coi1 at high frequencies. After manufacture, the frequency response of each driver is tested for conformity to rigid performance standards.

The 2426H is offered in an 8 ohm impedance, and the otherwise identical 2426J is offered in a 16 ohm impedance.

 

The 2426H features a removable flange to expose a 1 3/8“-18 snout for screw-on type horns.

Specifications:

  • Throat Diameter: 25 mm (1 in)

  • Nominal Impedance:2426H - 8 ohms2426J - 16 ohms

  • Minimum Impedance: 5 ohms (H), 9 ohms (J) @ 5 kHz

  • D.C. Resistance: 3.3 ohms (H), 6.5 ohms (J) +/- 10% @ 25C

  • Power Capacity:70 W continuous program above 800 Hz100 W continuous Program above 1.2 kHz

  • Sensitivity:107 dB SPL, 1 W @ 1 m, JBL 2344A horn110 dB SPL, 1 W @ 1 m, JBL 2370A horn117 dB SPL, 1 mW on plane wave tubes

  • Nominal Efficiency: 25% (800 Hz to 2.5 kHz)

  • Frequency Range: 500 Hz to 20 kHz

  • Recommended Crossover4: 800 Hz or higher, 12 dB/octave slope minimun

  • Diaphragm: 0.05 mm (0.002 in) pure titanium

  • Voice Coil Diameter: 44 mm (1% in)

  • Voice Coil Material: Edgewound aluminum ribbon

  • Flux Density: 1.8 T (18,000 gauss)

  • Bl Factor:6.3 N/A(H)9.3 N/A (J)

  • Positive voltage to black terminal gives diaphragm motion toward phasing plug

  • Mounting:Three 1/4-20 threaded holes, 120 apart on 57.2 mm

  • (2-1/4 in) diameterFront snout may be removed (unscrewed) to expose standard 1 3/8 in -18 screw threads
  • Dimensions: 149 mm (5 7/8 in) diameter, 104 mm (4 1/8 in) depth

  • Net Weight: 4.3 kg (9-1/2 lb)
Weight1.35 kg1.30 kg1.70 kg10.00 kg2.00 kg4.50 kg
Dimensions137 × 137 × 80 cmN/AN/AN/AN/AN/A
Additional information
Weight 1.35 kg
Dimensions 137 × 137 × 80 cm
Weight 1.30 kg
Weight 1.70 kg
Weight 10.00 kg
Weight 2.00 kg
Weight 4.50 kg