• Equipped with: 15" Woofer and 1" compression driver
• Frequency range [-10 dB]: 48 - 18,000 Hz
• Max SPL: 125 dB
• Dispersion pattern: 90° x 60°
• Class D (LF) + Class AB (HF)
• Power Peak (LF + HF): 400W
• Signal input: 1x Combo (XLR / Jack), Mic / Line, 1x XLR / TRS
• Signal output: 1x XLR Male (LINK / MIX)
• 3 Handles - two at the side, one at the top
• 36 mm Pole mount
• Dimensions (W x H x D): 430 x 722 x 402 mm
• Weight: 19.3 kg
• Colour: Black
• Includes softcover

This remarkably versatile 10“/1" enclosure can serve as a satellite, a fullrange cabinet, and a low-profile wedge monitor. The Music/Speech knob adjusts its finely balanced and therefore feedback-resistant frequency response to suit the given application. All this and an onboard power amp make the PR:O 10 XA a very flexible sound reinforcement tool indeed.

Features
Application: Fullrange Cabinet / Stage monitor / Satellit
Output Power: 600 Watt
Speaker Output for Extension Cabinet
Mic and Line Input
Versatile High-class Tool

Title PREMIUM PR:O 
Product Class Active Systems
Model PR:O 10 XA
Frequency response +/- 3 dB 89 Hz - 19 kHz
Frequency response -10 dB 67 Hz - 19 kHz
Maximum SPL, @ 10% THD  121 dB
Connections 1x XLR Combi Line In/Mic balanced,1x XLR Through balanced
LF Speaker 10"
HF Driver 1"
Horn characteristics 90° x 60° CD horn
Equalizer Tone control
Subsonic filter 35 Hz
Peak limiter yes
RMS-Soundlimiter yes
HF protection (passive) Dyn. protection circuit
Amplifier 600 W class D - 4 ohms
Parallel Speaker Out Min impedance 8 Ohm/300 Watt 1x Speakon
Pole mount DuoTilt 3/7
Rigging points 3x M8
Handles 1, integrated
Enclosure MDF
Grille metal grille with acoustic foam
Finish acrylic painture, black
Dimensions (WxHxD) 32 cm x 48 cm x 29 cm
Weight 13,9 kg / 30.6 lbs.

Comprising four versatile loudspeaker enclosures for either portable use or fixed installation, FBT is debuting the VENTIS range at Pro Light + Sound 2016. Available in either passive or bi-amplified versions, each of the models – the VENTIS 115, 112, 110, and 206 – has been designed to meet the highest standards in both performance and aesthetic appeal.

For the VENTIS range, quality and flexibility are the watchwords. Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofers, the 115, 112 and 110 models are two-way, bass reflex designs housed in 15mm birch plywood. A full-grille design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.

The three enclosures are as suitable for fixed installation as they are for use on the stage. M10 points are included as standard while an optional U-bracket can be used for wall-mounting. For use on the road, the  VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.

Meanwhile the multi-purpose VENTIS 206 can be deployed as a front fill, an under-balcony fill, as a main providing pristine speech intelligibility or simply as the full-range companion of a subwoofer. Constructed in 12mm birch plywood, the 206 has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio.

Power for the active VENTIS models comes courtesy of a specially designed, Italian made switching mode amplifier module. Low frequencies are driven by a highly efficient 700W RMS (full bridge) Class-D topology, operating with extremely low THD. For the HF stage, a 200W RMS performance is delivered via a meticulously crafted Class-H / AB design.

Finally, DSP on-board the VENTIS enclosures is both user friendly and powerful. Located on the rear of each enclosure, a menu-driven system is navigated via a single rotary control with push-to-select functionality. A total of 6 pre-optimised settings are available (see below), plus 2 further slots for users to form their own designs, using 5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid and high tone settings and an optional delay of between 0 and 3.5 metres. Finally, users can exclusively choose between two limiter modes, MAX-SPL or MAX-QUALITY, to best suit their performance.

• 2-way, bi-amplified, bass reflex design
• Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF
• Digital Signal Processor with graphic display
• 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
• High efficiency switch mode power supply
• Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
• 250mm (10”) LF woofer with 50mm (2”) voice coil, custom made for FBT
• 25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil
• Frequency response from 58Hz to 20 kHz
• 80°H x 50°V Constant Directivity Rotatable Horn
• 6 x M10 suspension points, optional wall bracket mount thread, 35mm (1 3/8”) top-hat
• Speaker stand socket, one aluminium handle
• 45° monitor taper

• Active 10" 2-way bass-reflex PA speaker
• 127 dB max. SPL and 300-watt RMS performance with a highly-efficient digital amplifier
• Perfect all-rounder for full-range, satellite and monitor applications
• Practical presets for fast and user-specific frequency tuning
• Homogeneous dispersion pattern thanks to a BEM-optimised tweeter wave guide
• 10" custom woofer and BMS tweeter driver
• Distortion-free sound at even maximum volumes, thanks to DynX® DSP technology
• 2 line/mic input channels with individual gain controllers plus mono mix output
• 12 mm birch plywood housing with ultra-robust polyurea coating and M10 rigging points
• Shock-resistant front grille for optimal protection of the speaker.
• 36 mm dual tilt stand attachment with 0° and 5° tilt angle
• Extensive and smart accessories for installation and transport

Frequency list
Quick Start Guide
Frequency list
Frequency list
User´s manual