Content |
220i System Processor with AFS? Advanced Feedback Suppression
Designed from the ground up to provide state-of-the-art signal processing,
the DriveRack 220i is the perfect tool for any fixed-install application.
With a full complement of processing features and Mic/Line inputs the
DriveRack 220i can provide both system and microphone processing.
Featuring the new, patent-pending Advanced Feedback Suppression (AFS)
algorithm, equalization, dynamics processing, delay, matrix mixing, and
bandpass filters, the DriveRack 220i will exceed your expectations.
The DriveRack 220i is piloted from the intuitive DriveWare GUI that offers
both Configuration and Control of the processing modules. Modules can
be accessed, edited and saved as part of programs. Processing modules
can be linked between the channels for true stereo processing. If independent
processing is desired, parameters can be copied from one channel to the
next to ensure that setup is quick and easy. Stored programs can be loaded
from either the front panel or from wall mounted Zone Controllers. Zone
Controllers can also be used for output muting or adjusting output volumes.
Features
* Advanced Feedback Suppression (AFS)
* Graphic and Parametric EQ
* Compressor
* Limiter
* Auto Gain Control
* Noise Gating
* De-Esser
* Ducker
* Bandpass Filters
* 2x2 Matrix Mixer
* 1.3 Seconds of Delay
* RS-232 PC GUI control
* Mic/Line Inputs
* Wall Panel Control
* Security Lockout
| L-1102 Leveler/Limiter
* Program dependent attack and release for transparent operation.
* Noise gate to cut off system background noise when there is no
signal.
* In limiter mode sense signal is from the amplifier output.
* Limits 4 ohm, 8 ohm, 25 V, 70 V and 100 V amplifier outputs.
* 20 dB gain in signal leveler mode.
* Security cover and rack-mount ears included.
* Five year warranty. |
The Avalon VT-737SP features a combination of TUBE preamplifiers, opto-compressor,sweep equalizer, output level and VU metering in a 2U space. PREAMPLIFIER The VT-737SP has three input selections: 1. The VT-737SP features a higher-performance microphone input transformer with +48v phantom selection. 2. Instrument DI high source input with jack located on front panel. 3. Balanced line input, discrete high-level Class A. The Class A preamplifier utilizes two cascaded, dual vacuum tube triodes configured with minimum negative feedback. A high gain switch boosts the overall gain of the preamplifier. The four high quality tubes are configured as singled ended anode coupled followers. A passive-variable high pass filter and hard-wire relay bypass completes the input signal conditioning. The phase reverse relay is available on all three inputs. OPTO-COMPRESSOR The opto-compressor features a minimum signal path design with twin Class A vacuum tube triodes for gain matching. The optical attenuator acts as a simple passive level controller. Full dynamic control from soft compression to hard- knee limiting can be achieved with threshold, ratio-compression, attack and release controls plus gain reduction selection on the large VU meter. Special spectral control including de-ess is available with the dual sweep mid EQ to side- chain switch. The EQ section can be flipped pre or post the opto-compressor via a front panel switch for alternate effects and tone shaping. Two VT-737SPs can be linked via a rear panel link cable for stereo tracking. The compressor bypass is a sealed silver relay for the most direct signal path. SWEEP-EQUALIZER AND OUTPUT LEVEL The VT-737SP equalizer utilizes 100% discrete, Class A-high-voltage transistors for optimum sonic performance. The high and low frequency bands provide the smooth characteristics of an all passive design, while the dual mid bands include variable frequency and switched Q-width selection. The enhanced range of the mid bands is extended into the high and low bands by the use of X10 frequency multipliers. The bypass switch incorporates a sealed silver relay for the most direct signal path. When the EQ to sidechain is engaged, the high-low EQ remains in the audio path for "tone enhancement“. The output level control provides a variable control of the overall signal path. The output amplifier utilizes another dual triode vacuum tube driving a 100% discrete, Class A, high-current, balanced and DC coupled low noise output amplifier. AVALON VT-737SP FEATURES Vacuum tube triode signal path, transformer balanced microphone input, high-voltage circuits for maximum headroom to +30dB, low noise -92dB, internal discrete power supply with toroidal transformer, soft-start tube life extender, stereo link for compressors, all discrete Class A equalizer with musical passive filter design, sealed silver relays for signal routing, large control knobs with professional conductive plastic potentiometers, VU meter for output level monitoring and compressor gain reduction. VT-737SP SPECIFICATIONS Circuit topology Four dual triode vacuum tubes (Sovtek 6922), high-voltage discrete Class A Gain Range Microphone: Transformer balanced 850/2500 ohm, 0dB to +58dB Instrument: Unbalanced 1 meg ohm, 0dB to+30dB Line: Balanced Class A 20k ohms, -27dB to 28dB Maximum input level and connector types Microphone26dB@25Hz, +30dB@1kHz balanced XLR Instrument+30dB unbalanced front panel jack socket Line +36dB balanced XLR Maximum output level +30dB balanced 600 ohms, DC coupled, discrete Class A Output type and gain XLR connector, output trim gain -45dB to20dB Noise 20kHz unweighted -92dB Noise microphone EIN -116dB, 22Hz to 22kHz unweighted Distortion THD, IMD 0.5% Frequency response -/2.5dB 10Hz to 120kHz input filter included Frequency response -3dB 1Hz to 200kHz line in-out VU meter and gain reduction High quality illuminated OVU =+4dB and gain reduction to -20dB High cut filter Variable 6dB per octave 30Hz to 140Hz Compressor type Optical passive attenuator incorporating twin vacuum tubes and stereo link Threshold - Ratio Threshold variable -30dB to +20dB, ratio-compression variable 1:1 to 20:1 Attack - Release Attack variable 2mS to 200mS, release variable 100mS to 5 seconds Equalizer type Discrete Class A, variable active and switched passive design Frequency bands (4) Treble - switched 10kHz, 15kHz, 20kHz, 32kHz, +/- 20dB range, shelf High mid - variable 200Hz to 2k8Hz and 2kHz to 28kHz, +/- 16dB range, hi-lo Q Low mid - variable 30Hz to 450Hz and 300Hz to 4k5Hz, +/- 16dB range, hi-lo Q Bass - switched 15Hz, 30Hz, 60Hz, 150Hz, +/- 24dB range, shelf AC power Internal toroidal 100v to 240v, 50-60Hz selectable, 75 watts maximum Dimensions 19 x 12 x 3.5 in (482 x 305 x 89mm) Weight 22lbs (10kg) Dimensions-shipping carton 21 x 18 x 8 in (533 x 457 x 203mm) Weight-packed 26lbs (11.8kg)
|
Features Enhance switch to restore spectral balance of compressed signal Switchable Mode - Dual Channel or Stereo linked Above or Below Threshold LEDs Balanced XLR and Jack Inputs and Outputs Intuitive, user friendly layout Flawless performance
Innovation The ARX COMPO? is a unique compressor/limiter designed for use in any professional audio dynamics control application, packaged in a compact 1 RU chassis.The COMPO operates as two independent compressor/limiters, with 'industry standard' variable Threshold, Ratio and Output gain controls. A Stereo Link switch on the front panel lets both channels track as a stereo pair in a Master/Slave configuration. Enhance Switch The COMPO features an 'Enhance' switch, which provides frequency restoration to preserve the spectral balance of the audio signal, compensating for the sagging Low and High frequency response of compressed program material. The best way to think of it is as a 'smart' loudness control. Wide Scale metering There is comprehensive LED indication of all operating functions and status. Above or Below Threshold LEDs on each channel give you instant visual confirmation of compressor activity, as well as easy to read LED Gain Reduction meters. Balanced Inputs and Outputs On the rear panel, each channel has true differential Balanced inputs and outputs, on both XLR and TRS jack connectors. Other features include an Active/Bypass switch for each channel, and passive RFI filters on the inputs. Universal AC Power AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the unit via a removable power lead and standard 3 pin IEC connector, with built-in fuse and voltage change switch. ARX Quality With its smooth compression, intuitive user friendly layout, high density precision circuitry, and extensive user-variable operating parameters, the ARX COMPO is the ideal installation 'set and forget' compressor, and is also equally at home in Studio, Broadcast and Sound Reinforcement environments.
Every day, ARX Audio interface products solve audio problems for thousands of people around the world.
T E C H N I C A L S P E C I F I C A T I O N S Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms Input Headroom + 22 dB CMRR >60 dB, 20 Hz-20 KHz Output Impedance Balanced 300 ohms, Unbalanced 150 ohms Output Level (Max) + 22 dB Frequency Response 20Hz to 20KHz ±0.4dB Signal to Noise ratio -85 dB Unweighted, -99 dB 'A' weighted Distortion .02% THD @ 0dB,1KHz Dynamic Range 107 dB Enhance Section Low Enhance 50 Hz, High Enhance 10 KHz Power Requirements 100/120 V AC, 220/240 V AC Weight 5 lbs/2.2 Kg Dimensions 19“W x 1?“H x 6“D, 482 x 44 x 155mm Input/OutputConnector type XLR, Balanced Jack
Front Panel Controls Channel A Active/Bypassed IN/OUT switch Threshold, Ratio and Output Gain controls Numbered marker panel for labelling compressor assigns 5 segment LED Gain Reduction display Above/Below Threshold status LEDs Enhance switch and status LED Stereo link switch and status LED Channel B controls identical to Channel A Rear Panel Connectors Balanced XLR Input and Output connectors. Balanced TRS jack Input and Output connectors. AC input connector, with voltage switch and fuse. |
In today's recording and sound reinforcement environments, the need for multiple channels of high quality, easy to use compression is growing rapidly. The new dbx® 1046 is designed to provide the audio professional with just that: 4 channels of great sounding dbx compression for a variety of applications. Incorporating the industry standard dbx designs and the latest available manufacturing techniques, the dbx 1046 provides pristine sonic quality with that classic dbx sound.
The 1046 provides 4 channels of smooth classic dbx OverEasy® or Hard Knee compression that are perfectly suited for use on individual tracks of your multitrack recorder, and in virtually all applications the separate channels can be individually interfaced and used for entirely independent purposes. Additionally the newly developed PeakStopPlus™ is ideal for protecting your system from the oppressive peaks that can take out valuable drivers in your sound reinforcement rig or studio monitors.
All four channels have the following controls:
Threshold - allows you to set the level at which the compressor starts affecting the gain
OverEasy - allows you to select between soft compression for overall gain control or Hard Knee compression based on the characteristics of the original dbx 160.
Ratio - allows you to set the slope of gain reduction affecting the signal over the threshold level.
Input/Output Meter - allows you to set the meter to check the input and output levels for maximum signal-to-noise ratio and best level matching.
Output Gain - allows you to add make-up gain or to adjust the output level for that channel to match the next device's input gain.
Bypass - hard wire bypass allows you to hear how the compressor is affecting your signal.
PeakStopPlus - allows you to set the maximum signal level you want to pass through this channel. While it's virtually impossible to eliminate distortion, the PeakStopPlus circuit does it gracefully and effectively with minimal distortion.
Stereo Link - allows you to link channels 1&2 and 3&4 for two channels of true stereo compression.
All four channels feature balanced gold plated XLR and 1/4" inputs and outputs, and switchable +4dBu or -10dBV operating level to interface each individual channel with any other device.
So whether you need to control the level, placement in the mix, or overall characteristics of 4 independent signals or control the gain leveling on a couple of stereo pairs, the dbx 1046 is for you.
- Four independent channels of operation, stereo linkable in two pairs
- PeakStopPlus™ limiting control for setting maximum allowable level regardless of compressor settings
- Independent Threshold and ratio controls
- Switchable OverEasy® or Hard Knee compression
- Classic dbx® compression
- Differentially balanced gold-plated XLR and 1/4" inputs and outputs
- True RMS level detection
- Precision metering of input level, output level, and gain reduction
- Dual True stereo or quad mono operation
- Switchable +4dBu or -10dBV operation per channel
Input Connectors | XLR and 1/4" TRS (Pin 2 and tip hot) | Input Type | Electronically balanced/unbalanced, RF filtered | Input Impedance | Balanced > 40 kOhm, unbalanced >20 kOhm | Max Input | > +22 dBu balanced or unbalanced | CMRR | Typically >50 dB at 1 kHz | Output Connectors | XLR and 1/4" TRS (Pin 2 and tip hot) | Output Type | Servo-balanced/unbalanced, RF filtered | Output Impedance | Balanced 30 Ohm, unbalanced 15 Ohm | Max Output | > +22 dBm balanced, > +20 dBm unbalanced | Bandwidth | 20 Hz to 20 kHz, +0/-0.5 dB | Frequency Response | 0.35 Hz to 90kHz, +0/-3 dB | Noise | | Dynamic Range | > 118 dB, unweighted | THD+Noise | >0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain), | IMD | | Interchannel Crosstalk | | Stereo Coupling | True RMS Power Summing | Compressor Threshold Range | -40 dBu to +20 dBu | Compressor Ratio | 1:1 to infinity:1 | Compressor Threshold Characteristic | Selectable OverEasy® or hard knee | Compressor Attack/Release Characteristic | AutoDynamic™ | Compressor Attack Time | Program-dependent | Compressor Release Time | Program-dependent | Compressor Output Gain | -20 to +20 dB | Limiter Threshold Range | 0 dBu to +24 dBu (off) | Limiter Ratio | infinity:1 | Limiter Type | PeakStopPlus® two-stage limiter | Limiter Stage 1 | PeakStop® brickwall limiter | Limiter Stage 1 Attack Time | Zero | Limiter Stage 1 Release Time | Zero | Limiter Stage 2 | Predictive intelligent program limiter | Limiter Stage 2 Attack Time | Program-dependent | Limiter Stage 2 Release Time | Program-dependent | OverEasy® Switch | Activates the OverEasy compression function | I/O Meter Switch | Switches between monitoring input and output levels on the Input/Output Level meter | Bypass Switch | Activates the direct input-to-output hard-wire bypass | Operating Level Switch | (rear panel) Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels | ST Link Switch | Links channels in stereo pairs. Channels One and Three become the master channels | Gain Reduction Meter | 8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB | I/O Meter | 8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu | PeakStop™ Indicator | 1 LED to indicate PeakStop™ limiting | Function Switches | LED indicator for each front-panel switch | Output Transformer Options | Jensen® JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx | Operating Voltage | Switchable:100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz | Power Consumption | 20 Watts | Fuse | 100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T | Power Connector | IEC receptacle | Dimensions | 1.75“Hx19“Wx9“D (4.4cmx48.3cmx20.1cm) | Unit Weight | 5.2 lbs. (2.4 kg) | Shipping Weight | 7.6 lbs. (3.5 kg) |
|
Interactive Reference-Class 2-Channel Expander/Gate/Compressor/ Peak Limiter with
Integrated De-Esser, Dynamic Enhancer, Tube Simulation and Low Contour Filter
Whether you?re recording, mixing or mastering, the COMPOSER PRO-XL MDX2600
gives you total dynamic control. It includes all of the features you would expect from
a reference class compressor?plus a voice-adaptive de-esser, a new dynamic
enhancer, authentic tube emulation and much more. These are some of the indispensable
tools for producing clean, consistent audio with virtually no loss in signal quality.
Features:
Switchable IKA (Interactive Knee Adaptation) program-adaptive compression circuitry
combines the advantages of hard-knee and soft-knee characteristics
Integrated de-esser with switchable male/female voice recognition removes excessive
sibilance from your vocal tracks
IGC (Interactive Gain Control) peak limiting circuitry combines clipper and program
limiter for reliable and inaudible protection against signal peaks
Switchable dynamic enhancer for brilliant, lively audio even with heavy compression
IRC (Interactive Ratio Control) expander/gate circuitry for virtually inaudible
noise suppression
Switchable tube simulation for the extra warmth and transparency of classic
tube circuitry
Automatically or manually adjustable attack and release times
Switchable low contour filter prevents "pumping" due to low-frequency
dominated compression
Stereo couple function with independent output level settings
Switchable side chain input with side chain monitor function
Ultra low-noise 4580 operational amplifiers and state-of-the-art THAT¬ VCA's
Separate 12-segment LED meters for input/output levels and gain reduction
Dedicated "traffic light" threshold and de-esser level displays
High-quality detented ALPS¬ potentiometers and illuminated switches
Servo-balanced inputs and outputs with ? in. TRS and gold-plated XLR
connectors
Relay-controlled hard bypass switch with auto bypass function in case
of power failure
Manufactured under ISO9000 certified management system
|
Reviews
There are no reviews yet.