Content |
dbx 1261 Overview
The ZonePRO 1261 from dbx is a digital zone processor that features twelve-channels of input and six-outputs. The unit is suitable for installation in restaurants, fitness centers, nightclubs and any other situation that requires multiple-zone control of audio sources with paging features. The ZonePRO 1261 has no front panel control and requires a computer for initial set-up.
The processor provides two balanced inputs on Euroblock terminals that are selectable as line or microphone level (with phantom power) along with eight pairs of analog RCA line inputs, with each pair internally summed to mono. An RCA coaxial S/PDIF digital input is also available. Outputs are available via Euroblock terminals and can be configured as either stereo or mono. A DB-9 connector is located on the front panel for connecting to a computer.
The included Windows based control software communicates with the unit via RS-232 or Ethernet. Processor blocks can be switched in or out of a chain and include input gain, high-pass filtering, parametric EQ, compression, limiting, gating, AGC, ducking, de-essing, AFS (Advanced Feedback Suppression), notch filters, signal routing, band-pass filtering, delay and polarity. An AutoWarmth module provides gentle bass boost compensation as signal levels are lowered.
The ZonePRO 1261 really shines when utilized with optional remote wall-mount controllers that can be positioned within the various zones. The wall-mounts are able to provide local volume control or scene selection, dependent on the type of controller installed. A built-in real-time clock can provide programmable system changes throughout the day or week. All program memory is non-volatile, ensuring program security in the event of power failure or computer malfunction.
Note:
Stereo sources and stereo output can be configured using the control software, but input channels and number of zones available will be reduced correspondingly.
Twelve-channel input, six-output zone processor with no front panel control
Note:
Each pair of RCA inputs is internally summed to mono. To maintain a stereo source, two sets of inputs need to be used
Processing blocks available on both inputs and outputs
Up to six zones can receive independent audio sources, with paging priority
Note:
Number of zones available will depend on whether mono or stereo output channels are required, with zones available decreasing by two for every stereo channel
Local zone control is available utilizing the optional WC series of wall-mounted controllers
Microphone input can have AFS (Advanced Feedback Suppression) inserted with fixed or live filter response
“Autowarmth" module provides a bass-boost to low level signals
AGC (Automatic Gain Control) maintains even levels
Other dynamic DSP includes compression, limiting, noise gating and ducking
Includes band-pass and crossover filters, notch filtering and parametric EQ
Security lockout
Computer control via RS-232 and Ethernet
An analog input bus allows inputs from one unit to be sent to a another unit for application scalability
Frequency Response |
20Hz to 20kHz, +/-0.5dB |
Dynamic Range |
>110dB A-weighted, >107dB unweighted |
Inputs |
Balanced Microphone and Line on Euroblock 16 x RCA phono (analog) 1 x RCA coaxial S/PDIF (digital) |
Outputs |
Euroblock (6-outputs) |
Input Impedance |
Euroblock: >50kΩ balanced, >25kΩ unbalanced, RF filtered RCA: >25kΩ unbalanced, RF filtered |
Output Impedance |
Balanced: 120Ω Unbalanced: 60Ω |
Maximum Input Level |
Mic/Line: +20dBu RCA: +12dBu |
Maximum Output Level |
+20dBu |
Sample Rate |
48kHz |
Phantom Power |
+15V |
Crosstalk (Main Outputs) |
>80dB |
THD + N |
0.003% typical at +4dBu @ 1kHz, 0dB gain |
System Requirements |
For ZonePRO software: 1GHz or faster processor Windows 2000/XP 256MB RAM (512MB recommended) 1024 x 768 or higher screen resolution |
Dimensions (WxDxH) |
19 x 5.75 x 1.75" (483 x 146 x 45mm) |
Weight |
6.8 lbs (3.1 kg) |
In the Box
- dbx ZonePRO 1261 - 12-Input / 6-Output Digital Zone Processor without Front-Panel Control
|
The ZonePRO 640m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.
The 640m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.
The 640m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.
A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.
The front panel of the 640m features comprehensive signal metering, an informative LCD display and user-specified front panel control.
Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.
All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).
ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 640m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 640m.
Front Panel LED Indicators
Per Output:4 Independent Six-Segment Lightpipe Output Meters that range from -30 to +20 dBu, Threshold Meters
Other:LCD Display provides information about Source Selection, Page Steering, Zone Volume and Mute
Analog Inputs:
6 Total (4) Switchable Mic or Line, (2) Unbalanced, Mono-Summed RCA Input Pairs
Type:Euroblock (Mic/Line), RCA (Source)
Impedance (Euroblock):>50kΩ Balanced, >25kΩ Unbalanced, RF Filtered
Impedance (RCA):>25kΩ Unbalanced, RF Filtered
Max. Input Line Level:+20dBu Mic/Line, +12dBu RCA
CMRR:> 40dB, typically >55db @ 1kHz
Mic Pre Gain:30 to 60dB
Mic Input Noise (E.I.N.):
Mic Phantom Power:+15VDC
ANALOG OUTPUTS
Number of Outputs: 4 Total
Type:Electronically Balanced, RF Filtered Euroblock
Impedance:120Ω Balanced, 60Ω Unbalanced
Max. Output Level:+20dBu
A/D PERFORMANCE
Type: dbx Type IV™ Conversion System
Dynamic Range line: >113dB, A-weighted, >110dB unweighted
Type IV dynamic range:
>119dB, A-weighted, 22kHz
BW: >117dB, unweighted, 22kHz BW
Sample Rate: 48kHz
D/A PERFORMANCE
Dynamic Range: 112dB A-weighted, 109dB unweighted, 22kHz BW
SYSTEM PERFORMANCE
Dynamic Range: >109dB A-weighted, >106dB unweighted, 22kHz BW
THD+N: 0.003% typical at +4dBu, 1kHz, 0dB gain
Frequency Response: 20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk: >80dB typical
Crosstalk input to
output: >80dB
Propagation Delay 0.6 msec
POWER REQUIREMENTS
Operating Voltage: 100 VAC, 50/60Hz, 120 VAC, 60Hz, 230VAC 50/60Hz
Power Consumption: 29 Watts
BTU: | The KT-AES50 network module provides a dual port AES50 digital audio interface, compatible with both the Klark Teknik DN9650 and DN9652 Network Bridges and the Midas NEUTRON-NB Dual Network Bridge Expansion Module for the industry-leading NEUTRON High Performance Audio System Engine.
Featuring up to 48 bidirectional channels at both 48 kHz or 96 kHz sample rates, with dual port redundancy in 48 kHz systems, KT-AES50 enables the interconnection of two AES50 networks operating at 96 kHz and 48 kHz respectively, as well as providing expanded AES50 channel counts in either 48 kHz or 96 Hz AES50 networks.
KT-AES50 is designed for simplicity of use, and can operates from the incoming AES50 clock or an external clock via host unit. Panel-mounted LED indicators show the connection status for both AES50 ports.
KT-AES50 is electrically and mechanically compatible with the industry standard Cirrus CM-1 format.
SuperMAC (AES50-Compliant) digital audio networking technology from Klark Teknik simultaneously provides high channel counts, ultra low and deterministic latencies, sample-synchronous and phase-aligned networked clock distribution, error detection and correction, network redundancy, and ease of deployment and use – to meet the demanding requirements of live concert touring.
KT-AES50 is compatible with all Midas digital consoles, audio system engines, digital I/O units, as well as with any other AES50-equipped devices. |
The NAI48-ES is a digital audio network interface that uses the EtherSound network protocol. Digital mixing consoles such as the Yamaha PM5D, M7CL, or LS9 can be connected to AD8HR 8-channel microphone preamp/AD converter or DA824 DA converter units via the NIA48-ES for remote analog input or output interfacing on stage or wherever needed. This type of system eliminates noise problems that are unavoidable with conventional analog console plus multi-cable type setups, and dramatically reduces microphone cable length for superior sound quality. Cabling between the console and "stage box" units is also simplified for fast, easy setup.
48 channels of digital audio each way over a single Cat-5 Ethernet cable EtherSound™ Networking Uncompromising Yamaha Quality, Compatibility, and Reliability
General specifications
Sampling Frequency | 42.9975kHz to 49.2kHz
85.995kHz to 98.4kHz | Maximum I/O channel count | 48 IN/48 OUT (44.1/48kHz), 32 IN/32 OUT (88.2/96kHz) | Power requirements | AC100-240V 50/60Hz, and/or DC12V | Power consumption | 12W | Dimensions (W x H x D) | 480 x 44 x 150mm | Weight | 2.6kg |
Digital I/O characteristics
Terminal | Format | level | Connector |
---|
AES/EBU
1-6 | IN | AES/EBU | RS422 | D-sub 25P | OUT | EtherSound™ | IN | 100Base-TX | 100Base-TX | RJ-45 | OUT |
Control I/O characteristics
Terminal | Level | Connector |
---|
WORD CLOCK | IN | TTL/75Ω | BNC | OUT | HA Remote | RS422 | D-sub 9P |
|
CobraNet is a network technology for multichannel transmission of digital audio data. The CM-1 is a compact interface module for NetMax to allow connection to a CobraNet network, which allows the simultaneous transmission of up to 32 digital audio input signals and 32 digital audio output.
* Designed for Cinema, Club Sound, Commercial Sound/Life Safety, Concert Sound, House of Worship, Performance & Sports Venues, Stadium Systems, and other applications.
* 100BASE-TX ethernet interface; 100Mbit/s full-duplex Ethernet interface; IEEE 802.3u compatible.
* Secondary 100BASE-TX Ethernet interface. Second Ethernet interface for the connection of a redundant network to establish fault tolerant systems. Internal audio output interface for the transmission of 32 digital audio channels with 48 kHz sample rate and 16, 20, or 24-bit word length
* Internal audio input interface for receiving 32 digital audio channels with 48 kHz sample rate and 16, 20, or 24-bit word length.
* Control, monitoring, configuration, and firmware updates via Ethernet protocol.
* Status LEDs. Link, activity, fault, and CobraNet conductor status indication via Ethernet connectors.
|
- Connect 2 TVs or projectors and switch between 4 connected HDMI devices.
- HDMI matrix switch allows you to watch other HDMI devices on 2 screens independently.
- Use the built-in 1080p downscaler in case 1 or more screens do not support 4K resolution.
- Suitable for the latest Ultra HD 4K60 resolution (3840 x 2160/60 Hz), High Dynamic Range (HDR), Deep Color and 4:4:4 chroma colours.
- Supports Dolby Atmos and DTS:X and all other common audio formats.
- With additional digital audio output to also connect your AV receiver using a single cable.
- Supports Audio Return Channel (ARC) to avoid lip-sync problems.
- Switches automatically and/or with remote control.
Connections
|
|
AV input |
4 x HDMI |
AV output |
2 x HDMI |
Digital audio output |
1x Toslink (optical) |
Video
|
|
Video resolution |
Max. 4K60 (3840 x 2160@60 Hz) |
PC resolution |
Max. 2560 x 2048 Hz |
Video bandwidth |
18 Gbps |
Clock frequency |
Max. 600 MHz |
HDMI standard |
HDMI, EDID, DVI, Deep Color 36 bit, x.v. Colour and 3D formats |
HDCP standard |
HDCP 2.2 |
Colour formats |
RGB and YCbCr 4:4:4, 4:2:0 or 4:2:2 |
Colour depth |
Max. 36 bit |
Audio
|
|
HDMI audio |
DTS-HD Master Audio, Dolby TrueHD, Dolby Atmos, DTS:X, Dolby Digital/AC3, DTS 5.1 and PCM stereo |
Optical Audio |
Dolby Digital/AC3, DTS 5.1 and PCM stereo |
General
|
|
Dimensions (h x w x d) |
18 x 242 x 104 mm |
Weight |
620grams |
Power |
100-240 VAC 50/60 Hz, 12 VDC adapter |
|
Reviews
There are no reviews yet.