| Content |
Dimensions | Metric :6-15/16” W x 9-11/16” D x 10-11/16” H | 17.6 x 24.6 x 27.1 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 5-1/2" high definition bass/midrange driver pressure coupled to one 8” bass radiator
Frequency Response :26 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :20 – 200 watts
A/V Receiver Crossover Setting :60 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Piano-Gloss Black
Included Accessories :Keyhole bracket (with 2 screws to mount to speaker)
Mounting Options :Vertically: On Shelf; On Wall with optional included keyhole bracket for flush mounting
Packaging :Two to a carton
Weight | Metric :14 lbs | 6.4 kg
Warranty :5 Years |
EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01")
| Powerful, dynamic 2 x 8" Bandpass Subwoofer. Its compact dimensions permit unobtrusive placement of the subbass anywhere, either vertically or horizontally. A 2-channel power amplifier is all that is required to operate e.g. a subbass with up to 4 satellites. Sturdy MDF housing with textured finish.
Specifications 2 x 8" Bandpass Subwoofer:
- Model Name: LDSUB88
- Type: Bandpass
- Components:
- Woofer: 2 x 8" Custom Made
- Power Capacity (Cont./Peak): 2 x 100 W / 2 x 180 W
- Frequency Range: 40 Hz - 120 Hz
- SPL 1 W / 1 m: 92 dB
- Max SPL: 115 dB
- Impedance: 2 x 8 ohms
- Connectors:
- Input: Clamp-type
- Output: Clamp-type
- Cabinet Material: 15 mm MDF
- Cabinet Surface: Painting
- Dimensions: 450 x 500 x 520 mm
|
The alphaton Direct Injection-Box SM-50 allows direct connection of electric guitars,
electric bass, and electronic music instruments with mixing desks of PA systems
and of recording studios.
The SM-50 reduces the amount of microphones used on stage, thus improving gain
before feedback.
Coloration of sound is avoided. Clean signal without interference from other instruments
eases the job of the recording engineer. The use of a strong aluminium die-cast box allows
trouble-free function for a number of years even under adverse conditions. Double grounding
(hum) can be eliminated by activating the built-in ground-lift switch. Isolation voltage between
input and output is 2500 volts, against ground 1500 volts (with ground-lift switch activated).
The box thus complies with toughest safety standards.
Technical Data
input impedance 20 kOhm
input impedance, instrument
input impedance, line-In
input impedance, speaker
output impedance 200 Ohm
frequency response 30 ... 20000 Hz, ± 1 dB
THD
isolation voltage tranformer pri/sec 2500 V
outpur to ground 1500 V
inputs 1/4" phone jacks, unbalanced
outputs XLR, balanced, microphone level.
pin 1 = ground, pin 2 = hot, pin 3 = cold
case aluminium die-cast
weight 230 g
dimensions113 x 71 x 37 mm
|
One 1" pure aluminum dome tweeter.
Two 5-1/4" BDSS cast basket drivers pressure coupled
to one 6“x12" low bass radiator.
Freq. Response: 30 Hz - 30 kHz.
Impedance: 8 Ohms.
Sensitivity: 92 dB.
Rec. Ampl. Power: 20 - 300 watts.
Inputs: Bi-amp/bi-wire 5 way binding post terminals.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim.
Dimensions: 41.2 x 20 x 38.4 cm.
Weight: 9.9 kg each.
|
ME 160
Enclosure Bass reflex type
Power Handling Capacity Continuous pinknoise: 150W
Rated Impedance 6 ohms
Sensitivity 88dB (1W, 1m)
Frequency Response 50 ? 20,000Hz
Crossover Frequency 2,000Hz
Speaker Component 16cm resin-impregnated natural fiber cone woofer
(magnetically shielded) 2.5cm soft-dome type(magnetically shielded)
Input Terminals Screw terminals (compatible with a dual-banana plug),
gold plated
Finish Enclosure: MDF, black, paint Front grill: Cloth, black
Dimensions 216 (W) ? 376 (H) ? 244 (D) mm
Weight 7.5kg (per unit)
Mounting Brackets (option) WCB-31, CMB-31
|
Reviews
There are no reviews yet.