| Content |
One 8" high excursion active subwoofer driver,
two 8” planar low-bass radiators
Frequency Response :16 Hz – 200 Hz
Internal Amplifier Power :1200 watts
Inputs: One line-level LFE, one pair line level, one pair
5-way binding posts (LP filtered)
Wireless-ready (kit optional SCW-100)
Available Finishes: Piano-Gloss Black lacquer
Dimensions: 30 x 27.9 x 30.3 cm,
|
Dimensions | Metric :10-1/4” W x 10-1/4” D x 10-1/4” H | 26.0 x 26.0 x 26.0 cm
Driver Complement :One high-definition 7-1/2" long throw woofer, pressure coupled to two 7-1/2” low bass radiators
Frequency Response :16 Hz – 200 Hz
Internal Amplifier Power :650 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :5 way binding posts
High Level Outputs :5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz:
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :25 lbs | 11.3 kg
Warranty :5 Years; 3 Years for Amplifiers |
System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit: 18 Hz
Upper Frequency Limit: 40 - 120 Hz Variable
Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output 650 watts Continuous. 1200 watts (peak)
Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation 4 Settings (Off/Music/Movie/Impact)
Phase Control 0-90-180-270 degrees
Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level -60 to +10dB in 1dB increments
Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input 3.5mm mono jack socket
Connections Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance 20 kohms
Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth 28 mm (1 1/8 Inches)
Weight (unpacked) 35.3 kg (77.6 lbs)
Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption Maximum 1000W. Standby Fuse Type 20mm UL/VDE (Value is region specific)
IR Remote Control Code NEC SH6122
AVAILABLE IN SIX COLOR FINISHES
![colors_01]( "colors_01")
|
The ASW610 subwoofer presents a very happy medium between the more diminutive ASW608 and the all-out power of the ASW610XP. Its long-throw 250mm driver allows the ASW610 to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the compact unit running cool, even when the music or movie action is whipping up a storm.
In all of the 600 Series subwoofers, the bass driver diaphragms are constructed from a rugged, finely-tuned mix of paper pulp, Kevlar® fibres and resin, which provides the stiffness needed to withstand the tremendous physical forces exerted by the voice coil and pressures inside the cabinet.
Ultra-solid construction delivers slamming bass, drum kicks, and special movie effects. Deformation is minimised; bass precision, power and enjoyment are maximised.
| Description | Active closed-box subwoofer system |
|---|
| Drive unit | ø250mm (10 in) paper/Kevlar® cone long-throw | | Frequency range | -6dB at 20Hz and 25/140Hz adjustable (EQ at A) | | Frequency response | ±3dB 27Hz – 40/140Hz adjustable (EQ at A) | | Bass Extension | -6dB at 20Hz (position A) |
| -6dB at 25Hz (position B) |
| -6dB at 30Hz (position C) | | Amplifier |
| | Power output: | 200W | | Rated power consumption: | 40W / 0.5W standby | | Input impedance: | 33kΩ | | Signal / noise: | >90dB | | Functions: | Input level (line in) |
| Input level (speaker in) |
| Low-pass filter frequency (line in only) |
| Low-pass filter bypass |
| Bass extension |
| Bass roll-off alignment |
| Auto sense on/standby |
| Phase switch | | Inputs: | Line In (RCA Phono) |
| Speaker in (Binding post) |
| 12v trigger (3.5mm jack) |
| Low-pass filter |
| Active 4th-order, variable cut-off frequency | | Dimensions | Height: 310mm (12.2 in) not including feet |
| Width: 310mm (12.2 in) |
| Depth: 375mm (14.8 in) including grille and controls | | Net weight | 12.5kg (27.6 lb) | | Finishes | Black Ash Vinyl |
| Red Cherry Vinyl | | Product Series Subwoofers
Speaker Type Subwoofer
Frequency Range (+/-3 dB) [Hz] 28 - 190
Maximum SPL [dB] 112
Crossover Frequency [Hz] 40 - 120 Hz
Low Frequency Driver 1 x 12" long stroke Polymere Aluminimum
Enclosure Type Bass Reflex
Bass Reflex Tuning Frequency [Hz] 36.0
Max. Amplifier Power Output [RMS watt] 220
Continous IEC Power Output [RMS watt] 170
Input Impedance [Ω] 25K
Connection input(s) Mono line level (LFE)
Stereo line level (low pass filtered)
RCA
Magnetic Shielding No
Recommended Placement Floor
Near wall or corner
Recommended Distance From Wall [cm] > 5
Functions Crossover Frequency
Phase Switch
Standby (Auto Power) On/Off Switch
Volume (Gain)
Maximum Power Consumption [W] 250
Max. Dimensions Incl. Base And Grille (HxWxD) [mm] 370 x 340 x 380
Weight [kg] 14.7
Accessories Included Manual
Rubber Bumpers
Spikes M6
Finish Black Ash Vinyl
Light Walnut Vinyl
White Vinyl |
Outer Flange Dimensions | (Metric) :15-1/2” W x 26-3/16” H | 39.4 x 66.5 cm
Cut Out Dimensions | (Metric) :14-3/8” W x 25-1/8” H | 36.5 x 63.8 cm
Depth from Flange | Metric :4” | 10.2 cm
Driver Complement :One 13" Long-Excursion Woofer coupled to a 13" infrasonic Radiator
Frequency Response :14 Hz – 200 Hz
Impedance :4 ohms
Required Amplifier :SubAmp 600 (available separately)
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template; Paintable removable all metal grill
Packaging :One to a carton
Weight | (Metric) :45 lbs | 20.4 kg
Warranty :5 Years
|
Reviews
There are no reviews yet.