Content |
One 11" high excursion active subwoofer driver,
two 12” planar low-bass radiators
Frequency Response :10 Hz – 200 Hz
Internal Amplifier Power :1500 watts
Inputs: One line-level LFE, one pair line level, one pair
5-way binding posts (LP filtered)
Wireless-ready (kit optional SCW-100)
Available Finishes: Piano-Gloss Black lacquer
Dimensions: 38.6 x 40.2 x 40.2 cm,
|
Dimensions | Metric :16-3/4” W x 16-3/4” D x 16-15/16” H | 42.5 x 42.5 x 43.0 cm
Driver Complement :One high-definition 14" long throw woofer, pressure coupled to two 14” low bass radiators
Frequency Response :11 Hz – 200 Hz
Internal Amplifier Power :1800 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :97 lbs | 44.0 kg
Warranty :5 Years; 3 Years for Amplifiers
|
Description Active balanced-drive closed-box subwoofer system
Drive units 2x Ø300mm (12 in) Rohacell® cone long-throw
Frequency range -6dB at 15Hz and 250Hz
Frequency response ±3dB 17Hz - 145Hz
Power output: 1000W
Rated power consumption: 135W
Standby power Consumption: 100dB
Functions: 5 Presets
Input sensitivity
Gain
Low-pass filter
Graphic equalisation
Room compensation
Auto on/standby
Trigger on/standby
Trigger preset switching
RS-232 automation control
Inputs: Stereo Line In (2x RCA Phono)
Mono (LFE) Line In (RCA Phono)
Mono (LFE) Line In (XLR balanced)
Dimensions Height:490mm (19.3 in) not including feet
Width: 460mm (18.1 in) including grilles
Depth: 410mm (16.2 in) including controls
Net weight 44kg (97 lb)
Cabinet finish Gloss Black
Cherrywood
Rosenut
Grille Black cloth
ALSO AVAILABLE IN Cherrywood, rosenut
|
Type Advanced YST II and QD-Bass Subwoofer
Driver 25cm(10'') cone
Dynamic Power 250 W
Frequency Response 20-160 Hz
Advanced YST Advanced YST II
QD-Bass Technology Front-firing
High-Efficiency Power Amplifier Yes
Linear Port Yes
BASS (Bass Action Selector System) Yes
Standby Power Consumption 0.3 W
Dimensions (W x H x D) 380 x 368 x 420 mm
Weight 18.5 kg
|
Amplifier Output: 1000 watts (RMS) 2000 watts (Peak) Frequency Response: 16Hz to 40/160Hz variable Crossover (Low Pass): 40Hz - 160Hz Variable slope characteristic from 12 - 36dB/Octave Sub-Sonic Filter (High Pass): 16Hz - 31Hz EQ: 4 x Presets 1 x User Setting Equalisation: Graphic 9 band Equaliser ±6dB in 0.5dB steps Volume Level: -80 - 0dB (1dB increments from 0 to -30dB & 2dB increments from -31 to -80dB) Auto Sensing Input Requirements: Line Level>5mV (RMS) Variable delay time 5, 10, 15, 20, 25 & 30 minutes Variable Phase Control: 0. 45. 90, 135, 180, 225, 270 & 315º Internal Memory: 3 Independent memory locations Cabinet Specification: Sealed Cabinet with 25mm thick M.D.F construction with critical internal bracing Amplifier Classification: Class-D amplifier with DSP control Driver Complement: 1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil External Dimensions - Excluding Plinth: Width: 485mm (19 inches) Height: 455mm (18 inches) Depth: 475mm (18 3/4 inches) Weight: 50 Kg (110lbs) Mains input Voltage: 100 - 240 Vac 50/60Hz (Factory Set) Trigger Input: 3.5mm Jack input, +12Vdc = On State User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Dimensions | Metric :12” W x 12” D x 12-1/2” H | 30.5 x 30.5 x 31.8 cm
Driver Complement :One high-definition 8" long throw woofer, pressure coupled to two 8” low bass radiators
Frequency Response :14 Hz – 200 Hz
Internal Amplifier Power :1250 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz. Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :42 lbs | 19.0 kg
Warranty :5 Years; 3 Years for Amplifiers |
Reviews
There are no reviews yet.