DIGITAL SOUND 8928 Sound dB meter

Original price was: €141.00.Current price is: €119.00. incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Digital Sound 8928 SPL Meter with Built-In Measurement Mic – calibrated from 300Hz to 8kHz (+/-2dB), 4 control zones in 10dB steps (40-130dB), large LCD display, peak-hold, fast/slow display modes, includes 9V battery. A superbly designed easy to use sound level meter with features normally only found on more expensive instruments. It has an electret […]

 

Read more

Digital Sound 8928 SPL Meter with Built-In Measurement Mic – calibrated from 300Hz to 8kHz (+/-2dB), 4 control zones in 10dB steps (40-130dB), large LCD display, peak-hold, fast/slow display modes, includes 9V battery.

A superbly designed easy to use sound level meter with features normally only found on more expensive instruments. It has an electret condenser microphone giving virtually instant readings updated every 0.5 seconds on an extra large LCD display.

  • 4 measuring ranges, 40 to 70dB, 60 to 90dB, 80 to 110dB or 100 to 130dB
  • 0.1dB resolution updated every 0.5 seconds
  • Auto ranging or manual range selection
  • ʽAʼ & ʽCʼ frequency weighting
  • Fast or slow response filters
  • 42mm LCD display with quasi-analogue bargraph and function Indicators
  • Bargraph in 1dB steps updated every 40ms
  • Max hold function to display the highest recorded value
  • Min/max memory since power on or last reset
  • Low battery indicator
  • Auto power off
  • Analogue output AC: 0.707 Vrms (at full scale)
  • Supplied with battery
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “DIGITAL SOUND 8928 Sound dB meter”

Your email address will not be published. Required fields are marked *

Quick Comparison

DIGITAL SOUND 8928 Sound dB meter removeBEHRINGER CT200 Microprocessor-Controlled 8-in-1 Cable Tester removePALMER AUDIO PAN04 PMBL TOOLS Line level Mergebox removeALPHATON ACT-100 CABLE TESTER removeWORK CABLE ANALYZER removeARTSOUND A8862 LASERGRIP THERMOMETER remove
NameDIGITAL SOUND 8928 Sound dB meter removeBEHRINGER CT200 Microprocessor-Controlled 8-in-1 Cable Tester removePALMER AUDIO PAN04 PMBL TOOLS Line level Mergebox removeALPHATON ACT-100 CABLE TESTER removeWORK CABLE ANALYZER removeARTSOUND A8862 LASERGRIP THERMOMETER remove
Image
SKU8928E010300PMBLACT-100CABLE ANALYZA8862
Rating
Price Original price was: €141.00.Current price is: €119.00. incl. GR VAT Original price was: €74.90.Current price is: €55.00. incl. GR VAT Original price was: €373.14.Current price is: €227.94. incl. GR VAT Original price was: €310.00.Current price is: €297.60. incl. GR VAT Original price was: €155.00.Current price is: €131.75. incl. GR VAT39.78 incl. GR VAT
Stock

In stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stockOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentDigital Sound 8928 SPL Meter with Built-In Measurement Mic - calibrated from 300Hz to 8kHz (+/-2dB), 4 control zones in 10dB steps (40-130dB), large LCD display, peak-hold, fast/slow display modes, includes 9V battery. A superbly designed easy to use sound level meter with features normally only found on more expensive instruments. It has an electret condenser microphone giving virtually instant readings updated every 0.5 seconds on an extra large LCD display.
  • 4 measuring ranges, 40 to 70dB, 60 to 90dB, 80 to 110dB or 100 to 130dB
  • 0.1dB resolution updated every 0.5 seconds
  • Auto ranging or manual range selection
  • ʽAʼ & ʽCʼ frequency weighting
  • Fast or slow response filters
  • 42mm LCD display with quasi-analogue bargraph and function Indicators
  • Bargraph in 1dB steps updated every 40ms
  • Max hold function to display the highest recorded value
  • Min/max memory since power on or last reset
  • Low battery indicator
  • Auto power off
  • Analogue output AC: 0.707 Vrms (at full scale)
  • Supplied with battery
  • Microprocessor-controlled cable tester featuring 3 modes: cable and installed cable test plus test tone mode
  • Accepts all standard connectors: XLR, Speakon*, TRS (1/4“, 1/8“), RCA, RJ45, MIDI and USB
  • Super-easy operation with intuitive LED display
  • Continuity check and intermittent contact detection
  • Phantom-power and ground-shield check
  • Test-tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV
  • Operates with 2 AA size batteries (not included)
  • Designed and engineered in Germany

The PMBL is a 2 channel passive line level merge box. Each channel has 2 balanced XLR/f inputs. The input signal is merged via a resistor network to a XLR/m output.The top side input is transformer isolated. Possible applications might be the routing of two mixing desks to one power amp or mixing a stereo signal down to mono. Our transformer technology allows for an unbalanced top side input to be sent out balanced. 

Specifications:

  • Each Channel: Input 1 transformer balanced XLR/f. Symmetrically decoupled through resistors
  • Total ohmic value: 2 K Maximum level for THD

Cable Tester ACT-100

The Alphaton active remote cable tester can be used for testing either normal short
cables or long ones, especially mufticores, wkh connectors not being accessible at
one time. The tester is especially suded for fixed installations where cables can not
be tested with a standard type cable tester or Ohm meter. Either symmetric and
unsymmetric cables can be tested.
“Cold" solderings and junction resistances are displayed by color or luminosity changes
in three color LED Display. The imprinted fault table incorporates alt important fault
conditions, indeed not all possible ones due to their reiatively large number. In case the
display is in a state which cannot be found on the imprinted table, it can be looked up in
the user's manual. In any case, however, the cabie is in aquite unusable state and should
be repaired or replaced.The Alphaton cable tester has a SEND and a REMOTE section.
The REMOTE sectionconsistsof two recessed mounted XLR type male or female connector
and a stereo phone jack at the right hand side of the tester. Additionally, a separate REMOTE
plug is delivered togetherwith the active remote cable tester for testing long cables in fixed
installations.

 

The tester allows to makea fast test connection for many type of audio and
lighting cable, checking up to 7 connections (Neutrik? , Speakon?, XL3,
XLR5, DIN RCA, Jack and BNC). Two rows of LEDs will light up to indicate
which pin is connected correctly. a red lit LED and beep indicate short-circuited
connection

Specifications:
Battery: PP3 9V(not included) Accessory: Short Tester pinx2(included)
Net Weight: 0.71Kg Dimensions: 178x121x44mm

 ARTSOUND A8862 LASERGRIP THERMOMETER

Temperature range: -32 C - 550 C
Accuracy: 1,5%
Power supply: 9V
Weight: 258gr

Weight0.50 kg2.00 kg0.65 kg0.80 kg1.00 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 2.00 kg
Weight 0.65 kg
Weight 0.80 kg
Weight 1.00 kg
Weight 0.30 kg