The SmartRig-2 XLR Audio Adapter is an easy solution to connect any professional microphone to an iPhone, iPod touch, or iPad and Android devices.
As a high-quality microphone preamp, SmartRig allows you to use professional stage microphones or high-end studio microphones to be used as reporter mics in live situations with your mobile iOS or Android devices as the mobile transmitter to your studio.
it also supports HD Voice with its bandwidth of 20-20.000 Hz
A great complementary product for D&R GSM Hybrid is the Audio Adapter SmartRig 2 that, can offer as an \”in the Field\” product.
Together with a dynamic or condenser Mic, headphones and a smart-phone (Android or Apple) running a recording app on it could be your complete mobile reporter set for a minimum of investment.
Live reporting to the Studio in Voice-HD directly to D&R GSM Hybrid is now possible (depends on your GSM and provider)
Features
XLR microphone input connector
+48V phantom power for use with condenser microphones
3.5 mm Headphone output for monitoring
On/Off/+48V switch
Gain control
Power/Phantom Power provided by 9V battery (not included)
Specifications
Frequency Response: 20Hz to 20kHz (+/- 1.5dB)Noise: -98 dB full band (with Phantom Power)
Maximum Output Level: 2 Vrms
Distortion: 0.025% THD
Phantom Max Current: 13mA
Dimensions: 8.8cm x 4.1cm x 4.2cm
Weight: 75g (2.57oz)
Included in the box
1x SmartRig
1x User Guide
1x Velcro Strip
1x Warranty Card
Weight
0.10 kg
Reviews
There are no reviews yet.
Be the first to review “SARAMONIC SmartRIG-II XLR AUDIO, Guitar Adapter for Iphone , ipod touch, iPad” Cancel reply
The SmartRig-2 XLR Audio Adapter is an easy solution to connect any professional microphone to an iPhone, iPod touch, or iPad and Android devices.
As a high-quality microphone preamp, SmartRig allows you to use professional stage microphones or high-end studio microphones to be used as reporter mics in live situations with your mobile iOS or Android devices as the mobile transmitter to your studio.
it also supports HD Voice with its bandwidth of 20-20.000 Hz
A great complementary product for D&R GSM Hybrid is the Audio Adapter SmartRig 2 that, can offer as an \"in the Field\" product.
Together with a dynamic or condenser Mic, headphones and a smart-phone (Android or Apple) running a recording app on it could be your complete mobile reporter set for a minimum of investment.
Live reporting to the Studio in Voice-HD directly to D&R GSM Hybrid is now possible (depends on your GSM and provider)
Features
XLR microphone input connector
+48V phantom power for use with condenser microphones
3.5 mm Headphone output for monitoring
On/Off/+48V switch
Gain control
Power/Phantom Power provided by 9V battery (not included)
Specifications
Frequency Response: 20Hz to 20kHz (+/- 1.5dB)Noise: -98 dB full band (with Phantom Power)
Maximum Output Level: 2 Vrms
Distortion: 0.025% THD
Phantom Max Current: 13mA
Dimensions: 8.8cm x 4.1cm x 4.2cm
Weight: 75g (2.57oz)
Included in the box
1x SmartRig
1x User Guide
1x Velcro Strip
1x Warranty Card
he U46XL is a powerful multi-purpose 4-in 6-out multi-channel audio interface designed for various recording applications at home or on the road. The U46XL is the successor of to ESI Audio's famous U46DJ interface.
As its predecessor, it provides 2 stereo line inputs, a microphone input with +48V phantom power and a headphone output. A main difference is the improved analog circuitry improving the audio quality as well as the professional microphone preamplifier with XLR input. This makes the U46XL the perfect solution to record signals from dynamic or condenser microphones on the road or in your studio.
The unit also features an instrument input (Hi-Z), typically to connect a guitar directly to it. Two totally separate stereo line input on the backside provide 4 simultaneously usable input channels at one time. There are also 6 independent individual outputs on the backside, perfect for multi-channel playback applications like to provide individual outputs for software synthesizers, to provide independent playback channels for DJ software or to provide surround playback capability via a 5.1 setup. A separate mix output with professional TRS outputs could be used to connect U46XL to professional stereo studio monitors.
A cool feature is the DirectWIRE support in the driver, allowing you to record signals from one application to another internally. U46XL works with this driver based on our EWDM technology under Windows XP and Windows Vista/7, however U46XL is also Mac OS X compatible.
U46XL ships with Cubase LE 4 from Steinberg for Mac and PC to start recording on a professional level right out of the box.
Behringer UFO202 USB Audio Interface
The Behringer U-Phono UFO202 is a high-quality USB audio interface with built-in phono preamp and massive software package for digitalizing your tapes and vinyl records.
Features
- High-quality USB audio interface connects your turntable, cassette player, etc. with your computer for recording and playback
- Transfer and restore your valuable vinyl records and tapes to your computer via a simple USB connection
- Massive software bundle includes Audacity vinyl restoration, noise-reduction, editing and recording software, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins
- Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms
- Phono input switchable to line input source
- Stereo output allows easy connection and playback of computer audio files over your home sound system
- High-resolution 48 kHz converters for high-end audio quality
- Stereo Headphone output with dedicated Level control lets you monitor your input source
- Works with your PC or Mac computer -- no setup or drivers required
- Powered via USB--no external power supply needed
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
Compact and Versatile
Equipped with RCA inputs and outputs, the U-Phono UFO202 can connect to a myriad of equipment such as tape decks, sound modules and active monitors, plus many more. Additionally, when you connect the UF202's outputs to your mixer's input channels, you have the ability to access EQ, Aux Sends and much more - allowing you to create extremely versatile mixes for your recording sessions.
48kHz Precision
The Behringer UFO202 provides pristine 48kHz resolution to ensure that your favourite vinyl records are recorded with the detail and quality your music deserves.
Audacity Audio Editor Software
The Behringer U-Phono UFO202 USB Audio Interface comes supplied with a free open source audio editor and multi-track recorder software - Audacity. Please visit the Behringer web page for download links here.
Specifications
Input Connector: RCA, Unbalanced
Input Impedance: Approx. 27kΩ
Maximum Input Level: 2dBV
Output Connector: RCA, Unbalanced
Output Impedance: Approx. 400Ω
Maximum Output Level: 2dBV
Digital Output: Toslink, Optical
Digital Output Format: S/PDIF
USB: Type A
Converter: 16-Bit
Sample Rate: 32kHz, 44.1kHz, 48kHz
Frequency Response: 10Hz - 20kHz ±1dB @ 44.1kHz Sample Rate
10Hz - 22kHz ±1dB @ 48kHz Sample Rate
Crosstalk: -77dB @ 0dBV, 1kHz
Power Supply: USB, 5V 100mA Maximum
Dimensions: 0.87" x 3.46" x 2.36" / 22mm x 88mm x 60mm (H x W x D)
Weight: 0.10kg
The Traveler-mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.
Engineered for high-end mobile recording applications, the Traveler-mk3 delivers four very high quality mic inputs, bus power, optional battery power and DSP-driven mixing and effects processing.
The Traveler-mk3 provides eight channels of pristine 192 kHz analog recording and playback, combined with twenty channels of digital I/O in ADAT optical, AES/EBU and S/PDIF formats. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.
The Traveler-mk3 is equally well-suited for studio, stage and remote locations, with or without a computer. As an interface or stand-alone mixer, the Traveler-mk3 provides 28 separate inputs and 30 separate outputs, including four XLR/quarter-inch "combo” mic/instrument analog inputs equipped with pre-amps, individual 48V phantom power switches and Digital Precision Trim™ controls conveniently adjusted from the front panel or CueMix FX™ software.
MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.
Connect all of your audio instruments and gear, including mics, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer with no latency and no processor strain on your computer. Apply hardware DSP-driven effects processing to inputs, outputs, and busses independent of your host computer.
Add Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: a conventional compressor and the Leveler™, an accurate model of the legendary LA-2A™ optical compressor that provides vintage, musical automatic gain control. When recording from the four mic/guitar inputs, the Traveler-mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts.
After programming the on-board mixing in the studio, unplug the Traveler-mk3, remove the rack brackets, and take it on the road for operation as a portable, bus-powered audio interface for a laptop or battery-operated stand-alone mixer with effects. The Traveler slides easily into your backpack and fits neatly beneath your laptop. All mixing and effects parameters are adjustable using the front panel backlit LCD. Record extended sessions even in the most remote locations with the complete freedom of field battery power.
The Traveler-mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.
The SONAR REAC Recording System when used in conjunction with the RSS V-Mixing System or RSS Digital Snakes provides the most comprehensive live recording, mixing, mastering and delivery product available. This is the next phase in product development of the REAC driver, which Cakewalk engineered for Roland as a way for users to record from their Digital Snake/V-Mixer System directly into SONAR. The SONAR REAC Recording System includes:
The REAC protocol provides up to 40 channels of audio to be sent via a single CAT5e Ethernet or fiber optic cable. The REAC driver, developed by Cakewalk, allows the REAC output from the RSS V-Mixer or RSS Digital Snake to connect directly into a PC using a single Ethernet cable.
SONAR 8 Producer gives you what you need for recording, composing, editing, mixing, and mastering. Get innovations that matter, from exclusive features to ignite creativity and perfect your tracks, to groundbreaking technologies that always keep you in control, all backed by the industry's leading 64-bit audio quality. And SONAR 8 Producer delivers the go-to production tools you want with the best collection of virtual instruments, mixing, and mastering effects found in any DAW.
With unlimited tracks, amazing creative tools, inspiring virtual instruments, the freedom to work with any audio interface or control surface, and the most complete delivery capability for collaboration with users of other DAWS, award-winning SONAR Producer is your best choice in a digital audio workstation.
SONAR 8 is the only DAW that offers one-of-a-kind music creation tools that actually help in the songwriting process. Whether you are searching for new ideas or looking to add musical parts to existing songs, SONAR 8 can help you break through those creative blocks.
SONAR 8 provides the most comprehensive recording features of any DAW on the market today. It's designed to meet the needs of even the most demanding professional—whether recording a solo performance, a band, or even an orchestra.
Recommended System Requirements:
* Operating System: Windows XP (32 bit), Windows Vista (32 bit or 64 bit) * Processor Speed: Intel Core 2 Duo 2GHz or higher * RAM: 3 GB for 40 Channel Recording * Ethernet Port Speed: Gigabit Ethernet/CAT5e Only * Graphics: 1280 x 960, 24-bit color or higher * Audio Hard Drive Size: 30 GB * Audio Hard Disk Type: RAID 0 with (2) SATA drives * Audio Interface: SPS/FA-66 FireWire Audio Interface or Cakewalk VS-700 R * Media Drive: DVD-ROM, DVD+/-R or DVD+/-RW * Other Hardware: RSS Digital Snake or V-Mixing System, Roland CAT5e Cables (supplied with Digital Snakes), Gigabit Ethernet Switch (optional) * Other Software: Adobe Acrobat
nio 2 | 4 is a 2 In / 4 Out mobile USB interface for the modern music maker. Nio 2 | 4 features Novationʼs unique ʽDirect FXʼ technology, placing a powerful multi-effects engine within nio 2 | 4ʼs custom drivers. These effects rest close to the core of your computer, working independently of other software and providing powerful ultra-low latency effects for hassle-free, real time jamming and recording. This same unique environment ensures rock-solid, lightning-fast performance, making it the ideal interface solution for home recording, live performing and DJʼing alike; one size fits all. With two headphones outputs, itʼs also an ideal solution for the classroom environment.
Specifications
Audio Interfacing
Inputs:
1 XLR (with phantom power)
1 TS Jack
2 RCA Phono
Two inputs simultaneously only - either stereo RCA phono or the XLR and Jack
Outputs:
4 RCA Phono
2 stereo 1/4" Headphones Jacks
Digital Audio:
44.1/48kHz sample rate
24-bit resolution
Other interfacing
Data ports: 1 x USB 1.1
MIDI i/o
System requirements
Operating system: Mac OSX 10.3.9 or greater (Leopard also supported) or Windows XP with Service Pack 2 or greater (Vista 32/64 also supported)
Minimum Computer spec: Mac - G3/600MHz or G4/667MHz, both with 256MB RAM or PC - Pentium 3/500MHz/256MB RAM (machines running Vista will require a higher spec)
Interfacing: USB 1.1 compatible USB connector (also compatible with USB 2.0), 28/24 awg USB cable recommended
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.