Content |
DSP-555
ΗΧΟΣΤΗΛΗ AΛΟΥΜΙΝΙΟΥ ΕΞΩΤΕΡΙΚΟΥ / ΕΣΩΤΕΡΙΚΟΥ ΧΩΡΟΥ
EXTRA ΛΕΠΤΟ / SLIM DESIGN
40 W / 70 - 100V
MEΓΑΦΩΝΟ: 3ʼʼ x 5” x 5
TWEETER: 2,5ʼʼ x 1
88 dB@1w / 1m - 102 dB PEAK
ΑΠΟΚΡΙΣΗ ΣΥΧΝΟΤΗΤΑΣ: 140 Hz - 14 KHz
ΧΡΩΜΑ: ΑΣΠΡΟ
ΔΙΑΣΤΑΣΕΙΣ: 87 x 11 x 11 cm
ΒΑΡΟΣ: 4,6 kg
ΣΤΗΝ ΣΥΣΚΕΥΑΣΙΑ ΠΕΡΙΛΑΜΒΑΝΕΤΑΙ Η ΒΑΣΗ ΣΤΗΡΙΞΗΣ
|
- 55 Hz to 15 kHz frequency range (-10 dB)
- 175 watts continuous program power capacity
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 2.8 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Spring-loaded input terminals
- Dimensions (HxWxD): 380 mm x 280 mm x 220 mm (15 in x 11 in x 8.6in)
- Net Weight: 6.3 kg (14 lb)
|
The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.
BS-33AT | | Rated Input: | 6W (100V line), 3W (70V line) | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W) | Sensitivity: | (1W, 1m): 91dB | Frequency Response: | 120 – 15,000Hz (–20dB) | Speaker Component: | 5" (12cm) cone-type | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14) 7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16) | Connetion: | Push-in connector (bridging terminal) | Attenation Level: | 3W: OFF, 1 (–12dB), 2 (–6dB), 3 (0dB) 6W: OFF, 1 (–13dB), 2 (–7dB), 3 (0dB) | Operating Temperature: | –10°C to 50°C (14°F to 122°F) | Finish: | Case: ABS resin, off-white | Rear bord: | Hard board | Dimensions: | 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) (excluding volume control) | Wall Mounting Case front mount: | 184mm (7.24“) | Dimensions: | Fixing hole mount: 120mm (4.72“) | Weight: | 810g (1.79 lb) | Accessory: | Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16 (0.16" x 0.63“)) × 2 |
|
The BS-634 and BS-634T are wall-mount speakers matched with a supplied plug-in speaker receptacle, for easy installation. The 6W
rated input BS-634/634T are 5" (12cm) cone-type speakers. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A selectable attenuation function is provided on the BS-634T. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible.Enclosure and grille net colour is off-white. |
100V bi-directional Sound Projectors with 2 speakers mounted back to back for projecting the sound in two directions. 3 positions selector for adjusting the sound power. They are recommended for music or speech reproduction. Weather-proof design and suitable for indoor and outdoor use.
Technical Info
Input power: RMS 15W
Output power: 3.75, 7.5, 15W
Speaker: Two 5.5" paper
/plastic cone speaker
Input voltage: 50, 70, 100V
Impedance: 100V-2.66K Ohm / 1.33K Ohm
/ 666 K Ohm 70V-1.33K Ohm
/ 666 Ohm / 326 Ohm
50V-666 Ohm / 326 Ohm / 166 Ohm
Freq. resp.: 150~20kHz
S.P.L: 94 dB (1W/M)
Material: ABS resin
| The JBL Control 128W premium in-wall speaker designed for applications where top performance is required. The high performance 8 inch wooer features apolymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other aimable tweeter designs.
JBL Control 128W at a Glance:
- 30 Hz - 20 kHz frequency range.
- 120W continuous program (60W cont. pink, 240W cont. peak).
- 90 dB sensitivity (1W/1m).
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-128RIF Rough-In-Frame for new construction installation to wallstuds.
|
Reviews
There are no reviews yet.