DSPPA MAG-1335 STEREO AMP 2 x 350w

2,015.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
STEREO ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2 x 350w ΤΗΣ ΣΕΙΡΑΣ MAG BASS – TREBLE – VOLUME CONTROL INPUTS: XLR + JACK 6.3mm OUTPUTS:: 70V + 100V + 200V ( 3 wire mode ) ΕΝΔΕΙΚΤΙΚΑ LED: SIGNAL – CLIP – PROTECTION ΔΙΑΣΤΑΣΕΙΣ: 48,2cm x 8.8cm x 43cm ΒΑΡΟΣ: 30 kg

 

Read more

STEREO ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2 x 350w ΤΗΣ ΣΕΙΡΑΣ MAG
BASS – TREBLE – VOLUME CONTROL
INPUTS: XLR + JACK 6.3mm
OUTPUTS:: 70V + 100V + 200V ( 3 wire mode )
ΕΝΔΕΙΚΤΙΚΑ LED: SIGNAL – CLIP – PROTECTION
ΔΙΑΣΤΑΣΕΙΣ: 48,2cm x 8.8cm x 43cm
ΒΑΡΟΣ: 30 kg

Weight 30.00 kg

Reviews

There are no reviews yet.

Be the first to review “DSPPA MAG-1335 STEREO AMP 2 x 350w”

Your email address will not be published. Required fields are marked *

Quick Comparison

DSPPA MAG-1335 STEREO AMP 2 x 350w removeTOA CA-130 60W Mobile Amplifier removeBITTNER AUDIO XV 1000-2x500W-100V POWER AMPLIFIER removeTOA P-120D 2 Channel Power Amplifier 2X200W/4Ω removeCROWN 135MA Mixer Amp, 3 Input, 1/2 Rack, Mono, 35W 8 ohms or 70V/100V removeTOA A-2030 30 Watt Amplifier remove
NameDSPPA MAG-1335 STEREO AMP 2 x 350w removeTOA CA-130 60W Mobile Amplifier removeBITTNER AUDIO XV 1000-2x500W-100V POWER AMPLIFIER removeTOA P-120D 2 Channel Power Amplifier 2X200W/4Ω removeCROWN 135MA Mixer Amp, 3 Input, 1/2 Rack, Mono, 35W 8 ohms or 70V/100V removeTOA A-2030 30 Watt Amplifier remove
Image
SKUMAG-1335CA 130BIT-0003P-120D135MAA-2030
Rating
Price2,015.00 incl. GR VAT 160.00 incl. GR VAT 1,905.16 incl. GR VAT 1,309.75 incl. GR VAT 291.00 incl. GR VAT 235.00 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityIn stockAvailable on backorderAvailable on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

STEREO ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2 x 350w ΤΗΣ ΣΕΙΡΑΣ MAG
BASS – TREBLE – VOLUME CONTROL
INPUTS: XLR + JACK 6.3mm
OUTPUTS:: 70V + 100V + 200V ( 3 wire mode )
ΕΝΔΕΙΚΤΙΚΑ LED: SIGNAL – CLIP – PROTECTION
ΔΙΑΣΤΑΣΕΙΣ: 48,2cm x 8.8cm x 43cm
ΒΑΡΟΣ: 30 kg

  • Easy installation in practically any 12V battery equipped car.
  • Compact, rugged construction and front panel controls.
  • Two phone jack mic. inputs and handy phone jack AUX input for external equipment connection.
  • Unidirectional dynamic microphone with talk switch.

Specification
Power Source Standard voltage: 14VDC
Usable Voltage; 10 ~ 16V DC (12V Battery Used)
Power Consumption 4.4A or less at rated power output.
Output Power Rated 30W, max. 60W
Output Impedance 4Ω (BRN), 8Ω (ORG), COmmon (WHT)
Changeable by changing lead wire connections.
Distortion Less than 5% (at 1kHz rated output)
Frequency Response 100 ~ 10,000Hz
Input Mic 1, 2 : 600Ω, 4 mV, Phone Jack
Aux : 10 kΩ, 500 mV, Phone Jack
Dimensions (W x H x D): 178 x 50 x 144mm (mounting device excluded)
Weight 1.1 kg
Finish Front panel; ABS resin, Black
Case; Zinc plated steel sheet
Accessory Microphone holder ... 1
Mounting Bracket ... 1
Mounting Screw ... 1
Fuse (8A) ... 1
Connection cord ... 1 set
Accessory Microphone Unidirectional dynamic type with Talk switch
Impedance : 600Ω
Sensitivity : -53dB (IkHz, 0 dB = 1 V / Pa)

XB Series - Intelligent Power

Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 1000: 2x500 W/100 V
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans (temp. reg. variable speed)
Weight:  33 kg
Dimensions:  2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)

P-120D features 2x 200W into 4 Ohm load. This amplifier matches the needs for noiseless operation through air-cooling. It is ideally suitable in studios, small theatres, cabarets, churches, conference- and multimedia rooms etc. Multiple protection circuits care for stable operation. The amplifier is rackmountable (2 units). The optional transformer LT-101 converts the input to a balanced transformer isolated input.

The Crown 135MA is a high value mixer-amplifier for commercial audio. It provides 8-ohm and constant-voltage outputs (70V and 100V). Typical uses are paging, background music, and music-on-hold. The 135MA provides 3 inputs (each with a volume control) and a 35W amplifier output. Other features include priority muting, voice activated muting, phantom power, and Bass and Treble controls.

Features

  • 3 inputs (each with a volume control), and one 35W amplifier output channel
  • Ideal for paging, background music, and music-on-hold
  • Balanced Phoenix-type mic/line input, telephone output, dual RCA stereo music inputs, screw-terminal speaker outputs
  • Priority muting by VOX or external switch
  • Bass and Treble controls on master output
  • Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

Specifications

  • Minimum Guaranteed Power into 8 ohms or 70V/100V Output: 35W
  • Frequency Response (at 1 watt from line out): 50Hz to 20kHz +/-1dB; 19Hz to 34kHz +0, -3dB
  • Signal to Noise Ratio (ref. to rated power, master volume at minimum):
    Mic: > 58 dB.
    Line: > 60 dB.
    Telephone: > 60 dB.
    Inputs 2 or 3 (and 4 in 160MA): > 78 dB
  • THD+N:

High cost-performance
Suitable for commercial audio systems in schools,
offices, shops, restaurants, factories, houses of worship, and large meeting rooms.
Equipped with balanced mic. inputs for better isolation from external noise, compared to unbalanced inputs.
Improved durability compared with conventional
TOA models.
Flexibility
A wide range of power outputs from 30W to 240W
Offers a comfortable acoustic space thanks to tone
control at bass and treble.
Both AC and DC operation possible
Phantom power provided to MIC1, for supplying
power to a condenser microphone.
Easy to handle
Scratch and fingerprint-resistant finish•Easy and quick volume control with master volume control.

 

Specification
Power Source 220 - 240V AC or 24V DC
Rated Output 30W
Power Consumption 34W (EN60065), 78W(AC operation at rated output, 2A (DC operation at rated output)
Frequency Response 50 - 20,000Hz (+/- 3 dB)
Distortion Under 1% at 1kHz,1/3 rated power
Input MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1)
Output SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:330W (100V)
LOW IMPEDANCE: 4Ω (11V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack
Phnatom Powe DC + 21V (MIC 1)
S/N Ratio Over 60dB
Tone Control Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz
Muting MIC1: Mutes other signals by 0 - 30 dB attenuation
Indicator Power signal, peak
Finish Panel: ABS resin, black/Case: Steel plate, black
Dimensions 420 (W) x 100.9 (H) x 280.2 (D) mm
Weight 5kg

 

Weight30.00 kg1.10 kg33.00 kg5.00 kg4.80 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 30.00 kg
Weight 1.10 kg
Weight 33.00 kg
Weight 5.00 kg
Weight 4.80 kg
Weight 5.00 kg