DSPPA WL-353 BALL SPEAKER 30W / 70-100V

ΗΧΕΙΟ ΜΠΑΛΑ ΕΣΩΤΕΡΙΚΟΥ ΧΩΡΟΥ
30W / 70-100V
ΜΕΓΑΦΩΝΟ 6,5ʼʼ
89dB@Iw/Im - 102dB max
ΧΡΩΜΑ: ΑΣΠΡΟ
ΔΙΑΣΤΑΣΕΙΣ: Φ23x19,5cm
ΒΑΡΟΣ: 2kg

Audiophile Performance, Cutting-Edge Stealth Design

Stacking the woofer behind the driver unit is an innovation so extreme you wonʼt believe the performance that results! Full-size speaker dynamics and a small-diameter cut-out built-in that virtually disappears into your decor. The Vanishing Series puts high performance stealth audio at your fingertips.

Vanishing 700-LS Features:

Extra deep well design with a Cassini oval woofer mounted above and behind the main driver & tweeter array, for broad coverage and dynamic full-range audio performance in a built-in.

Vanishing® Series built-in speakers feature our exclusive wafer-thin Sheer-Grille™, a magnetically-secured grille that protrudes only 7mm from its surroundings. Sheer-Grilles have nearly transparent, ultra-small perfs, and are acoustically inert, for dynamic, unimpeded sound and more uniform coverage, even in larger rooms.

Painted to match your décor, Vanishing Series built-in speakers are virtually indistinguishable from their surroundings.

Enhanced, reengineered ring radiator tweeters extend top-end response for incredible details and realistic imaging.

Reflective surfaces in rooms can make sound brighter and cause image distortion. Engaging the Vanishing reflective room compensation feature (by selecting the low setting) lowers the tweeter level to compensate for reflective surfaces. Vanishing reflective room compensation is a custom audio control that cuts the level only in the 4-5kHz range, exactly where reflectivity destroys sound quality. Outside this narrow 1kHz band, the tweeter retains its detailed and accurate high frequency response, for no loss of realistic musical details.

Vanishing Series LS speakers are timbre-matched to Polk LSi speakers to insure utterly seamless blending from speaker to speaker in systems that combine traditional and built-in speakers.

If positioning limitations demand that your loudspeakers be installed closer than 2 feet from side walls, the proximity of the surface can result in a response bump between 50 and 200Hz. This can create boomy sound. The Vanishing wall distance toggle switch is a custom audio control that adjusts the crossover to flatten response and tune out boominess, without sacrificing deep bass response, for more lifelike sound and more flexible placement.

Dual bandpass bass ports are highly efficient in small enclosures, and smoothly funnels the angled wooferʼs low frequencies down around the driver array, eliminating "chuffing,” so your small, practically invisible in-ceiling speakers achieve superior full-range blending and broad coverage with surprisingly deep bass.

Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets; achieve secure, vibration-free efficiency with a simple turn of the patented Rotating Cam system.

All Polk products are made using the best materials and the most advanced manufacturing techniques. They pass the industryʼs most exhaustive quality tests, including drop testing, extreme signal response and UV & salt exposure testing. Polk loudspeakers are built to perform for a lifetime. 

Tweeter ¾" ring radiator x 1
Midrange ½" APP driver x 2
Mid/Woofer 5“x7" mineral filled polypro. x 1
Frequency Response 32 Hz - 27 kHz
Nominal Impedance 8 Ohms
Rec. Amp Power 10-150 W/ Channel
Efficiency 90 dB
Dimensions(cm) 20.64 x 21.59

Driver Complement

Tweeter
Quantity 1
Diameter 3/4" (1.91cm)
Type Ring radiator

Midrange

Quantity 1
Diameter 2 1/2" (6.35cm)
Type Dynamic Balance driver with aerated polypropylene cone

Subwoofer

Quantity 1
Diameter 7" (17.78cm)
Type Dynamic Balance woofer with mineral-filled polypropylene cone
Electrical

Total Frequency Response 32Hz-33kHz
Upper -3dB Limit 29 kHz
Lower -3dB Limit 45 Hz
Nominal Impedance 8 ohms
Efficiency 90 dB
Recommended Amplifier Power 10-150 watts per channel
Inputs Gold-plated spring-loaded posts
Dimensions

Cut-Out Diameter 6 1/2" (16.51cm)
Overall Diameter 8 1/8" (20.64cm)
Mounting Depth (includes 1/2" drywall) 8" (20.32cm)
Pre-Construction Bracket PB SC50
Overall Depth 8 1/2" (21.59cm)
Shipping

Unit of Measure each
Total Shipping Weight 8 pounds
Warranty

Speaker Warranty Lifetime 

2-way recessed ceiling speaker

The ICP 82 is the largest of the four recessed ceiling speakers of the Interior Performance series. Equipped with a 19 mm tweeter than can be pivoted by 35° in all directions, the in-ceiling system can also be adapted to very custom installation scenarios. As a result, most installation situations can be handled successfully.

Thanks to the coated surface of the cone and high-quality components, installation in humid areas such as in bathroom or near a swimming pool is no problem. In addition, installation with the help of the rugged clamping mechanism is easy

 
Principle
2-way in-wall/in-ceiling loudspeaker
Equipment
19 mm tweeter
200 mm woofer
Power Handling (RMS / Max.)
80 / 140 watts
Sensitivity (2.8V/1m)
91 dB
Impedance
8 Ohms
Frequency Response
34 – 24000 Hz
Crossover Frequencies
4.000 Hz
Recommended Amplifier Output
20 - 160 Watts
Outer Dimensions Ø
275 mm
Cutting Out Ø
240 mm
Mounting depth
102 mm
Weight
1.4 kg

This high-performance 6in in-ceiling speaker features a Nautilus swirl-loaded 25mm (1in) aluminium dome tweeter that pivots for adjustable off-axis treble response. Other highlights include a bass/midrange driver with a rigid die-cast chassis and a three-position EQ switch. The maximum amp power is 130W. Installation couldnʼt be easier, thanks to our QuickDogs™ fixing system and plug-and-play connection.

Outer flange (grille) diameter | Metric :5-3/8" | 13.55 cm
Cut out diameter | Metric :4-1/2" | 11.5 cm
Depth from flange | Metric :3-3/8" | 8.64 cm
Driver complement :3/4" (20mm) pivoting aluminum dome tweeter axially aligned with a 4-1/2" (11.4 cm) BDSS bass/midrange driver
Frequency response :35 Hz - 30kHz
Impedance :4 - 8 Ohms
Sensitivity :88 dB
Recommended associated amplifier power :10 - 150 WPC
Inputs :One pair of gold plated heavy duty spring loaded terminals
Available finishes :Paintable white (see manual for painting instructions)
Packaging :One speaker to a carton
Weight | Metric :2.6 lb. | 1.16kg
Warranty :5 years

Outer flange (grille) diameter | Metric :9-3/4" | 24.76 cm
Cut out diameter | Metric :8-3/4" | 22.2 cm
Depth from flange | Metric :3-7/8" | 9.77 cm
Driver complement :1-inch (25mm) pivoting Aluminum dome tweeter axially aligned with a 8" (20 cm) BDSS bass/midrange driver
Frequency response :26Hz - 30kHz
Impedance :4 - 8 Ohms
Sensitivity :90 dB
Recommended associated amplifier power :10 - 225 WPC
Inputs :One pair of gold plated heavy-duty spring-loaded terminals
Available finishes :Paintable white (see manual for painting instructions)
Packaging :One speaker to a carton
Weight | Metric :4.8 lb. | 2.14 kg