Content |
Cry Baby® Bass Wah Info
The first wah pedal designed by bass players for bass players. The 105Q incorporates a proprietary potentiometer* and custom EQ circuitry, specifically optimized for bass frequencies. The Cry Baby Bass Wah applies the wah effect to the mids and highs only, leaving a strong fundamental to hold down the bottom—so you can take solos or throw in fills without ever disturbing your low end. This amazing pedal is used by Flea, Justin Meldal-Johnsen, Doug Wimbish, Robert Trujillo and more. *ECB024C 20K BASS POT
Power: Dunlop ECB003 AC Adapter or Single 9 volt battery
| The FZ-5 is a modern pedal built for the modern guitarist, but the sounds you can get from the FZ-5 are pure retro. Looking back at the glorious rock sounds of the ʼ60s and ʼ70s, the FZ-5 recreates its vintage fuzz through BOSS state-of-the-art COSM technology. Recall the fuzz-filled flavors of classic pedals such as the Maestro FZ-1A, Fuzz Face, and Octavia pedals, and kick ʼem into overdrive with the FZ-5ʼs Boost knob. BOSS' proprietary COSM technology allows guitar players to recreate classic fuzz BOOST control for more aggressive tone. The FZ-5 is the perfect weapon for players wanting to beef up their rigs with classic retro fuzz artillery.
- Vintage sounds inspired by famous fuzz pedals of the ʼ60s and ʼ70s
- Uses advanced COSM technology to recreate classic fuzz
- BOOST control for more aggressive tone
- Road-tough BOSS metal construction
Nominal Input Level |
-20 dBu |
Input Impedance |
1 M ohm |
Nominal Output Level |
-20 dBu |
Output Impedance |
1 k ohm |
Recommended Load Impedance |
10 k ohms or greater |
Controls |
Pedal switch, LEVEL knob, FUZZ knob, MODE knob |
Indicator |
CHECK indicator (Serves also as battery check indicator) |
Connectors |
INPUT jack, OUTPUT jack, AC adaptor jack (DC 9 V) |
Power Supply |
DC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional) |
Current Draw |
36 mA (DC 9 V) |
Expected battery life under continuous use |
Carbon: 3 hours, Alkaline: 10 hours * These figures will vary depending on the actual conditions of use. |
Accessories |
Owner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), MODE sticker, Dry Battery 006P/9V (6LR61) |
Options |
AC Adaptor (PSA series) |
Size and Weight |
Width |
|
Depth |
|
Height |
|
Weight |
|
|
Produces everything from mild, natural chorusing to the penetrating stereo chorus popular in contemporary music. Covers a wide frequency range and includes both high- and low-cut filters.
Input Impedance | 1 M ohms |
---|
Output Impedance | 1 k ohms |
---|
Recommended Load Impedance | 10 k ohms or greater |
---|
Residual Noise Level | -93 dBu (IHF-A, Typ.) |
---|
Connectors | INPUT Jack, OUTPUT Jack A (mono)/ B, AC Adaptor Jack (DC 9 V) |
---|
Power Supply | DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor |
---|
Current Draw | 22 mA (DC 9 V) |
---|
Accessories | Dry Battery 9 V type (6F22/9 V) |
---|
Option | AC Adaptor (PSA-Series) | Size and Weight ( incl. battery ) |
---|
Width | |
---|
Depth | |
---|
Height | |
---|
Weight | |
|
VINTAGE TUBE OVERDRIVE TO800
What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain
Vintage Tube-Like Tone
In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.
Ease of Use
Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
- Get vintage overdrive, smooth sustain and screaming fat tone
- Perfect for guitar; great for bass and keyboards, too
- Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
- Captures every nuance of your playing from smooth overdrive to screaming tube sounds
- Dedicated Drive, Tone and Level controls for awesome sound shaping
- Status LED for effect on/off and battery check
- Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
- Rugged electronic On/Off switch for noise-free operation
| The Marshall EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay. Add dense rhythmic textures to your sound.
The Marshall EH-1 ECHOHEAD recreates six different delay effects for you to explore, from crystal-clear echoes to hypnotic reverse delays via the vintage whir of a retro tape machine. Create pulsing tones from your guitar rig and add dense rhythmic textures to your sound. The EH-1 Echohead features a maximum delay time of 2000ms, stereo outputs and a tap tempo delay imput. The EH1 Echohead dual outputs offer the choice of using a passive bypass for the main signal path to ensure complete tonal integrity or to allow your pedal to spill over, permitting your echo to naturally die away.
The main features of the Marshall EH-1 ECHOHEAD include:
- 6 different, high quality delay effects for you to explore
- Multi-mode selector switch
- Delay time control
- Feedback control
- Level control
- Solid metal casing
- Passive bypass
- Tap tempo pedal input
- Power: 9V DC Centre Negative Regulated PSU or PP3 battery
- Minimum Current Draw: 80mA
- Switches: On/Off Switch
- Indicators: On/Off LED
- Jacks: 2 Input, 2 Output 'Jack sockets' (1/4 inch)
- Input Impedance: 1MOhm
- Output Load Impedance: less than 1kOhm
- Dimensions: 120mm x 65mm x 55mm
- Weight: 510 grammes
|
Vintage BOSS phasing effects including 4-, 8-, 10-, and 12-stage phasers, plus new "Rise" and "Fall" effects for unidirectional phasing. Tap tempo sync or realtime control of rate via an Expression/Pedal input.
Nominal Input Level | -20 dBu |
---|
Input Impedance | 1 M ohms |
---|
Nominal Output Level | -20 dBu |
---|
Output Impedance | 1 k ohms |
---|
Recommended Load Impedance | 10 k ohms or greater |
---|
Residual Noise Level | -92 dBu (IHF-A, Typ.) |
---|
Connectors | INPUT Jack, OUTPUT Jack, EXP/CTL Jack, AC Adaptor Jack (DC 9 V) |
---|
Power Supply | DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor |
---|
Current Draw | 50 mA (DC 9 V) |
---|
Accessories | Dry Battery 9 V type (6F22/9 V) |
---|
Options | AC Adaptor (PSA-Series), Expression Pedal (Roland EV-5), Footswitch (FS-5U) | Size and Weight ( incl. battery ) |
---|
Width | |
---|
Depth | |
---|
Height | |
---|
Weight | |
|
Reviews
There are no reviews yet.