Content |
When you think about the classic wah-wah sounds of the 60s, you think about British bluesmen and psychedelic American rockers, not Italy. But those Sunshine-y and Foxey tones could not have existed without the Italian-made Fasel inductors that were in the first wah pedals—including the original Crybaby. These inductors were the key to the pedals' tone, but have been unavailable for years. Not anymore. Your Crybaby Classic with Fasel Inside will faithfully recreate the vocal sweep and lush harmonics from those timeless recordings. Plug in your Crybaby Classic and hear what you've been missing.
Features:
- Red Fasel inductor
- Heavy die cast construction for years of reliability
- 100K ohm Hot Potz potentiometer that allows for that quick, abrupt wah sound
- True-bypass switching
|
Bass chorus like the world has never known.
The DigiTech XBC Bass Multi Chorus Pedal is designed especially for bass. The XBC Bass Chorus Pedal lets you morph up to 16 bass chorus voices at once for an endless palette of amazingly rich effects. Built-in voice randomization increases with more voices for an even denser wash of killer chorus. DigiTech includes a 9V battery with the XBC Bass Multi Chorus Pedal.
DigiTech XBC Bass Multi Chorus Pedal Features:
- Designed especially for bass
- Morph up to 16 bass chorus voices at once
- Voice randomization increases with more voices
| The FZ-5 is a modern pedal built for the modern guitarist, but the sounds you can get from the FZ-5 are pure retro. Looking back at the glorious rock sounds of the ʼ60s and ʼ70s, the FZ-5 recreates its vintage fuzz through BOSS state-of-the-art COSM technology. Recall the fuzz-filled flavors of classic pedals such as the Maestro FZ-1A, Fuzz Face, and Octavia pedals, and kick ʼem into overdrive with the FZ-5ʼs Boost knob. BOSS' proprietary COSM technology allows guitar players to recreate classic fuzz BOOST control for more aggressive tone. The FZ-5 is the perfect weapon for players wanting to beef up their rigs with classic retro fuzz artillery.
- Vintage sounds inspired by famous fuzz pedals of the ʼ60s and ʼ70s
- Uses advanced COSM technology to recreate classic fuzz
- BOOST control for more aggressive tone
- Road-tough BOSS metal construction
Nominal Input Level |
-20 dBu |
Input Impedance |
1 M ohm |
Nominal Output Level |
-20 dBu |
Output Impedance |
1 k ohm |
Recommended Load Impedance |
10 k ohms or greater |
Controls |
Pedal switch, LEVEL knob, FUZZ knob, MODE knob |
Indicator |
CHECK indicator (Serves also as battery check indicator) |
Connectors |
INPUT jack, OUTPUT jack, AC adaptor jack (DC 9 V) |
Power Supply |
DC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional) |
Current Draw |
36 mA (DC 9 V) |
Expected battery life under continuous use |
Carbon: 3 hours, Alkaline: 10 hours * These figures will vary depending on the actual conditions of use. |
Accessories |
Owner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), MODE sticker, Dry Battery 006P/9V (6LR61) |
Options |
AC Adaptor (PSA series) |
Size and Weight |
Width |
|
Depth |
|
Height |
|
Weight |
|
| The V845 Wah-Wah pedal is a new version of the most famous guitar effects pedal of all time. Based on the specifications of the original pedal developed by VOX in the '60s, the V845 Wah-Wah offers guitarists the same legendary Wah-Wah tone in a new sturdy but very affordable design. An AC power connector is fitted to save on batteries and the outer case is coated with tough all-black finish making it the perfect choice for your pedal board.
About the VOX Wah-Wah
VOX developed the worldʼs first Wah-Wah effect during the '60s in an effort to allow guitarists to emulate the sound of a trumpet being muted — an important musical ingredient of the day. VOXʼs original Wah-Wah pedal quickly gained widespread popularity and its unique sonic characteristics have encouraged further experimentation by guitarists ever since. Having made spotlight appearances on some of the most famous recordings of all time, the Wah-Wah is still considered "must-have equipment” for guitar players of all levels and abilities today.
VOX V845 Wah-Wah Specifications
- Input/Output jacks: INST jack, AMP jack, DC i/p jack.
- Power supply: One 9V DC battery 6F22(S-006P)
- Power consumption: 540uA @ 9VDC
- Battery life for continuous use: approximately >100 hours with manganese battery (will vary depending on conditions)
- Dimensions: 102(W) x 252(D) x 75(H) (including rubber feet, pedal in lowest position)
- Weight: 942g (including battery)
|
Produces everything from mild, natural chorusing to the penetrating stereo chorus popular in contemporary music. Covers a wide frequency range and includes both high- and low-cut filters.
Input Impedance | 1 M ohms |
---|
Output Impedance | 1 k ohms |
---|
Recommended Load Impedance | 10 k ohms or greater |
---|
Residual Noise Level | -93 dBu (IHF-A, Typ.) |
---|
Connectors | INPUT Jack, OUTPUT Jack A (mono)/ B, AC Adaptor Jack (DC 9 V) |
---|
Power Supply | DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor |
---|
Current Draw | 22 mA (DC 9 V) |
---|
Accessories | Dry Battery 9 V type (6F22/9 V) |
---|
Option | AC Adaptor (PSA-Series) | Size and Weight ( incl. battery ) |
---|
Width | |
---|
Depth | |
---|
Height | |
---|
Weight | |
| The Marshall EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay. Add dense rhythmic textures to your sound.
The Marshall EH-1 ECHOHEAD recreates six different delay effects for you to explore, from crystal-clear echoes to hypnotic reverse delays via the vintage whir of a retro tape machine. Create pulsing tones from your guitar rig and add dense rhythmic textures to your sound. The EH-1 Echohead features a maximum delay time of 2000ms, stereo outputs and a tap tempo delay imput. The EH1 Echohead dual outputs offer the choice of using a passive bypass for the main signal path to ensure complete tonal integrity or to allow your pedal to spill over, permitting your echo to naturally die away.
The main features of the Marshall EH-1 ECHOHEAD include:
- 6 different, high quality delay effects for you to explore
- Multi-mode selector switch
- Delay time control
- Feedback control
- Level control
- Solid metal casing
- Passive bypass
- Tap tempo pedal input
- Power: 9V DC Centre Negative Regulated PSU or PP3 battery
- Minimum Current Draw: 80mA
- Switches: On/Off Switch
- Indicators: On/Off LED
- Jacks: 2 Input, 2 Output 'Jack sockets' (1/4 inch)
- Input Impedance: 1MOhm
- Output Load Impedance: less than 1kOhm
- Dimensions: 120mm x 65mm x 55mm
- Weight: 510 grammes
|
Reviews
There are no reviews yet.