| Content |
MC404 CAE Wah Info
The MC404 CAE Wah was developed by Bob Bradshaw of Custom Audio Electronics and the Cry Baby design team with the goal of creating a highly versatile wah-wah of top-grade components. It features dual Fasel inductors with two distinct voices (high-end emphasis or low to mid resonance), and a built-in MXR MC401 Boost/LineDriver adds even more flexibility. Choose between inductors and turn the boost on or off with the side-mounted kickswitches; bright LEDs on each side of the wah indicate operation status. The MC404 boasts true hardwire bypass, a long-life CTS potentiometer, and internal pots for "Q" and gain adjustments.
Power: Dunlop ECB003 AC Adapter or Single 9-volt battery
| Studio Quality Effects at Your Feet
Premier recording studios worldwide use Eventide on hit after hit. ModFactor features Eventide's 27 best modulation effects without compromising quality OR flexibility.
Flexibility Built-In
Plug-and-play expression pedal control of wet/dry mix or any combination of parameters. Control program changes and vary parameters continuously via MIDI. Supports instrument or line level inputs and outputs. Plays well with others; adapts seamlessly with a wide variety of amps and other foot pedals.
Obsolescence is so 20th Century
Easy to upgrade; download new software from the Internet and install via USB.
Features
- 27 of Eventideʼs signature stereo or mono effects:
- Liquid Chorus
- Shimmer Chorus
- Organic Chorus
- Negative Phaser
- Postive Phaser
- BiPhase Phaser
- Feedback Phaser
- WahWah Q-Wah
- Voc-Wah Q-Wah
- Positive Flanger
- Negative Flanger
- Jet Flanger
- Thru-o Flanger
- Lowpass ModFilter
- HiPass ModFilter
- BandPass ModFilter
- Standard Rotary
- Giant Rotary
- Bias Tremolo
- Opto Tremolo
- Modern Vibrato
- Vintage Vibrato
- Retro Vibrato
- Pitch Undulator
- Feedback Undulator
- Ring (DC) Ringmod
- String (AC) Ringmod
- Studio quality sound
- Software upgradeable via USB 2.0
- MIDI control via USB or MIDI in, out/thru
- Instant program change
- Real-time control with 10 knobs, MIDI, or expression pedal
- Tap tempo and MIDI clock sync
- 40 factory presets, unlimited through MIDI
- True analog bypass
- Rugged cast metal construction
- Reliable metal footswitches for instant preset access
- Mono or stereo operation
- Guitar or line level inputs and outputs
SPECIFICATIONS:
| Analog Input/Output |
| Input impedance |
500K ohms |
| Output Impedance |
470 ohms |
| Recommended Load Impedance |
10K ohms or greater |
| Connectors |
| Input 1 (mono) |
¼ inch mono phone jack |
| Input 2 |
¼ inch mono phone jack |
| Output 1 (mono) |
¼ inch mono phone jack |
| Output 2 |
¼ inch mono phone jack |
| Expression Pedal |
¼ inch mono phone jack |
| Aux Switch |
¼ inch stereo phone jack |
| USB |
Type B Socket. Use 2.0 cables only. |
| MIDI In |
Five pin DIN (Female) |
| MIDI Out/Thru |
Five pin DIN (Female) |
| AC Adapter Jack |
Power Supply included (see below) |
| Physical |
| Power |
9 VDC, 1200 mA, Tip hot (+) |
| Dimensions |
English: 4.8" (H) x 7.5" (W) x 2.12" (D)
Metric: 122 (H) x 190 (W) x 54 (D) mm |
| Weight |
2.15 lbs, 1kG |
|
Tame your tone with the new Snake Charmer Compressor. The result? Silky smooth, mesmerizing tone that behaves as it should. The Snake Charmerʼs compression affects the ratio and threshold of the signal, smoothing out peaks and spikes. At the same time, the Snake Charmer also increases the Gain level to complement the corresponding ratio and threshold settings so that the overall gain remains constant.
Thereʼs also a Gain Reduction Indicator that gives you visual cues of the results of your settings. And a High/Low Switch lets you choose between two overall levels of ratio. The Snake Charmer is equipped with other controls for Attack, which determines how quickly the gain reduction kicks in, and Release, which determines how long the gain is attenuated. Finally, the High-End Emphasis control fine-tunes the amount of compression applied to the top end of the guitar signal.
- Snake Charmer Compressor CT05
- Connection: Input: x1 (guitar input), Output: x1 (line output)
- Input / Output Impedance: 830 k-ohm / 4 k-ohm
- Tube: 12AU7 (ECC82)
- Power Supply: Four AA alkaline batteries or DC9V AC adapter
- Battery Life: Approx. 18 hours
- Current Consumption: 95 mA
- Dimensions: 168.5 (W) x 155.5 (D) x 64.0 (H) mm / 6.63” (W) x 6.12” (D) x 2.52” (H)
- Weight: 1,007 g (excluding batteries / 1,102 g including batteries)
- Included Items: Four AA alkaline batteries
|
VINTAGE TUBE OVERDRIVE TO800
What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain
Vintage Tube-Like Tone
In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.
Ease of Use
Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
- Get vintage overdrive, smooth sustain and screaming fat tone
- Perfect for guitar; great for bass and keyboards, too
- Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
- Captures every nuance of your playing from smooth overdrive to screaming tube sounds
- Dedicated Drive, Tone and Level controls for awesome sound shaping
- Status LED for effect on/off and battery check
- Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
- Rugged electronic On/Off switch for noise-free operation
|
Features The BD-2 Blues Driver delivers the creamy, yet crunchy sound associated with great blues guitar. This popular pedal provides instant access to the kind of warm overdrive and emotive distortion usually reserved for 30-year-old tube amps.
- Classic "blues" guitar tones with tube amp simulation
- Warm distortion and overdrive
- Responds to nuance and volume changes
- AC adaptor or 9V battery operation
- BOSS 5-year warranty
|
Vintage BOSS phasing effects including 4-, 8-, 10-, and 12-stage phasers, plus new "Rise" and "Fall" effects for unidirectional phasing. Tap tempo sync or realtime control of rate via an Expression/Pedal input.
| Nominal Input Level | -20 dBu |
|---|
| Input Impedance | 1 M ohms |
|---|
| Nominal Output Level | -20 dBu |
|---|
| Output Impedance | 1 k ohms |
|---|
| Recommended Load Impedance | 10 k ohms or greater |
|---|
| Residual Noise Level | -92 dBu (IHF-A, Typ.) |
|---|
| Connectors | INPUT Jack, OUTPUT Jack, EXP/CTL Jack, AC Adaptor Jack (DC 9 V) |
|---|
| Power Supply | DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor |
|---|
| Current Draw | 50 mA (DC 9 V) |
|---|
| Accessories | Dry Battery 9 V type (6F22/9 V) |
|---|
| Options | AC Adaptor (PSA-Series), Expression Pedal (Roland EV-5), Footswitch (FS-5U) |
|---|
| Size and Weight ( incl. battery ) |
|---|
| Width | |
|---|
| Depth | |
|---|
| Height | |
|---|
| Weight | |
|---|
|
Reviews
There are no reviews yet.