DUNLOP MXR MC406 CAE Buffer

144.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: G05DU00074 Category:
When you run your signal from your instrument to your amp though long cables and/or through a large array of effects with varying impedance, thereʼs bound to be some signal degradation. Placing the MC406 Buffer in your signal chain addresses this issue. Itʼs a low-noise buffer in a small, rugged housing; it can add up […]

 

Read more

When you run your signal from your instrument to your amp though long cables and/or through a large array of effects with varying impedance, thereʼs bound to be some signal degradation. Placing the MC406 Buffer in your signal chain addresses this issue.

Itʼs a low-noise buffer in a small, rugged housing; it can add up to +6dB of gain with the front-facing gain slider; it makes up for signal loss that can occur when combining effects with different impedance levels; it fine-tunes signal recovery with Hi and Lo cut switches; it has an extra output for a tuner, separate effects chain or amp, and can be set to receive either a buffered or unbuffered signal; it also features a convenient 9VDC power output jack which provides power for another pedal. The MC406 Buffer is truly a mighty utility with a small footprint—an ideal addition to any effects rig or pedalboard!

 

Application: Εl.Guitar
Type: Single
Display: No
Rythms: No
Pedal: No
Signature: No

 

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “DUNLOP MXR MC406 CAE Buffer”

Your email address will not be published. Required fields are marked *

Quick Comparison

DUNLOP MXR MC406 CAE Buffer removeBOSS BF-3 Flanger Pedal removeVOX SNAKE CHARMER COMPRESSOR PEDAL removeBOSS DS-2 TURBO DISTORTION Pedal removeBEHRINGER TO800 VINTAGE TUBE OVERDRIVE Pedal removeBOSS CEB-3 Bass Chorus Pedal remove
NameDUNLOP MXR MC406 CAE Buffer removeBOSS BF-3 Flanger Pedal removeVOX SNAKE CHARMER COMPRESSOR PEDAL removeBOSS DS-2 TURBO DISTORTION Pedal removeBEHRINGER TO800 VINTAGE TUBE OVERDRIVE Pedal removeBOSS CEB-3 Bass Chorus Pedal remove
Image
SKUG05DU00074690.ROL.096VOX SNAKE CHARMER690.ROL.045E007855690.ROL.305
Rating
Price 144.00 incl. GR VAT 170.00 incl. GR VAT 87.01 incl. GR VAT 95.00 incl. GR VAT42.00 incl. GR VAT137.63 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderIn stockAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

When you run your signal from your instrument to your amp though long cables and/or through a large array of effects with varying impedance, thereʼs bound to be some signal degradation. Placing the MC406 Buffer in your signal chain addresses this issue.

Itʼs a low-noise buffer in a small, rugged housing; it can add up to +6dB of gain with the front-facing gain slider; it makes up for signal loss that can occur when combining effects with different impedance levels; it fine-tunes signal recovery with Hi and Lo cut switches; it has an extra output for a tuner, separate effects chain or amp, and can be set to receive either a buffered or unbuffered signal; it also features a convenient 9VDC power output jack which provides power for another pedal. The MC406 Buffer is truly a mighty utility with a small footprint—an ideal addition to any effects rig or pedalboard!  

Application: Εl.Guitar
Type: Single
Display: No
Rythms: No
Pedal: No
Signature: No
 
Building on the 20-year legacy of the famous BOSS BF-2, the new BF-3 flanger pedal gives guitarists and bassists an updated version of the classic BOSS flanger with the thickest stereo flanging sounds ever. Two new modes (Ultra and Gate/Pan) create stereo flanging with incredible depth--even Slicer-type effects and sounds that seem to "swirl" around the listener. An instant classic.
  • BOSS' best flanging effects in a compact pedal
  • New Ultra and Gate/Pan modes for ultra-fat flanging and futuristic slicer-type sounds, respectively
  • Momentary mode turns flanging on instantly
  • Tap tempo adjustable via pedal
  • Independent Guitar and Bass inputs and stereo outputs
  • BOSS 5-year warranty

Tame your tone with the new Snake Charmer Compressor. The result? Silky smooth, mesmerizing tone that behaves as it should. The Snake Charmerʼs compression affects the ratio and threshold of the signal, smoothing out peaks and spikes. At the same time, the Snake Charmer also increases the Gain level to complement the corresponding ratio and threshold settings so that the overall gain remains constant.

Thereʼs also a Gain Reduction Indicator that gives you visual cues of the results of your settings. And a High/Low Switch lets you choose between two overall levels of ratio. The Snake Charmer is equipped with other controls for Attack, which determines how quickly the gain reduction kicks in, and Release, which determines how long the gain is attenuated. Finally, the High-End Emphasis control fine-tunes the amount of compression applied to the top end of the guitar signal.

  • Snake Charmer Compressor CT05
    • Connection: Input: x1 (guitar input), Output: x1 (line output)
    • Input / Output Impedance: 830 k-ohm / 4 k-ohm
    • Tube: 12AU7 (ECC82)
    • Power Supply: Four AA alkaline batteries or DC9V AC adapter
    • Battery Life: Approx. 18 hours
    • Current Consumption: 95 mA
    • Dimensions: 168.5 (W) x 155.5 (D) x 64.0 (H) mm / 6.63” (W) x 6.12” (D) x 2.52” (H)
    • Weight: 1,007 g (excluding batteries / 1,102 g including batteries)
    • Included Items: Four AA alkaline batteries

 

Features twin modes for an expanded range of distortion—taking you from blues-rock rhythms to searing leads at the press of a pedal or twist of a knob. The SD-1 Super OverDrive pedal produces the warm, natural distortion of an overdriven tube amplifier while maintaining the subtle nuances of a player's picking technique. This is one of BOSS' more subtle and smooth overdrive pedals, perfect for blues and rock.
  • Compact overdrive pedal with warm, smooth overdriven sounds
  • Unique asymmetric overdrive circuitry for a classic, natural tube amp growl
  • Tone control provides precise adjustment of drive sound
  • BOSS 5-year warranty
Input Impedance 1 M ohms
Output Impedance 10 k ohms or greater
Equivalent Input Noise Level –120 dBu or less (IHF-A, Typ.)
Connectors INPUT Jack, OUTPUT Jack, REMOTE Jack, AC Adaptor Jack
Power Supply DC 9 V: Dry Battery 9 V type, AC Adaptor
Current Draw 12 mA (DC 9 V)
Accessories Dry Battery 9 V type (6F22/9 V)
Option AC Adaptor (PSA-Series)
Size and Weight ( incl. battery )
Width
73 mm 2-7/8 inches
Depth
129 mm 5-1/8 inches
Height
59 mm 2-3/8 inches
Weight
400 g 0 lbs. 15 oz.
 
 

VINTAGE TUBE OVERDRIVE TO800

What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain

Vintage Tube-Like Tone

In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.

Ease of Use

Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
  • Get vintage overdrive, smooth sustain and screaming fat tone
  • Perfect for guitar; great for bass and keyboards, too
  • Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
  • Captures every nuance of your playing from smooth overdrive to screaming tube sounds
  • Dedicated Drive, Tone and Level controls for awesome sound shaping
  • Status LED for effect on/off and battery check
  • Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
  • Rugged electronic On/Off switch for noise-free operation

The CEB-3 Bass Chorus pedal offers a split-frequency chorus effect capable of applying warm, rich chorusing to the higher frequencies without muddying up the lows. It's the perfect chorus pedal for bassists.

  • Compact chorus pedal especially designed for bass guitar
  • Applies chorus sound to the high frequencies without altering low frequencies
  • Effect Level, Low Filter, Rate and Depth knobs permit precise tonal shaping
  • BOSS 5-year warranty
Weight1.00 kg1.30 kg1.00 kg0.40 kg0.50 kg1.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 1.30 kg
Weight 1.00 kg
Weight 0.40 kg
Weight 0.50 kg
Weight 1.40 kg