DYNAUDIO LYD-5 Active Studio Monitor Speaker (Piece)

419.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
– Nearfield Monitor with 5″ Woofer – Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification – Bass extension to extend or curtail the low end frequency response – Two different tunings: one for free standing and one designed for speakers within 50 cm of wall – Sound balance to influence the overall […]

 

Read more

– Nearfield Monitor with 5″ Woofer

– Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification

– Bass extension to extend or curtail the low end frequency response

– Two different tunings: one for free standing and one designed for speakers within 50 cm of wall

– Sound balance to influence the overall response of the speaker

The LYD 5 is our premium small-format near-field monitor. With its low volume precision, LYD is the perfect fit for smaller setups and home studios. LYD uses lightweight aluminium wire and voice coils in its handmade drive units, along with a state-of-the-art Class-D amplifier with a 96 kHz / 24bit signal path and DSP used just right to provide outstanding performance.

The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.

Frequency Response: 50 Hz – 21 kHz

Max SPL 1m, pair (IEC Short Term): 106 dB

Principle: Bass reflex

Crossover Freq.: 5200 Hz

Tweeter: 28mm Soft Dome

Woofer: 5”

Amplifier: HF 50W/LF 50W Class-D

I/O Connectors: XLR Balanced: RCA Unbalanced

Dimensions (W x H x D): 170 x 260 x 211mm

Weight: 5.4 kg

Type: Bass Reflex Active
Woofer: 5″
Tweeter: 28mm Soft Dome
Amplifiers Power: HF 50W/LF 50W Class-D
Input/Output Plugs: XLR Balanced: RCA Unbalanced
Frequency Response: 50 Hz – 21 kHz
Dimensions (W x H x D): 170 x 260 x 211mm
Weight: 5.4 kg

 

Weight 5.40 kg

Reviews

There are no reviews yet.

Be the first to review “DYNAUDIO LYD-5 Active Studio Monitor Speaker (Piece)”

Your email address will not be published. Required fields are marked *

Quick Comparison

DYNAUDIO LYD-5 Active Studio Monitor Speaker (Piece) removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR removeEDIROL DM-2100 2.1 SYSTEM 2 SATELLITE 15W 1 SUB 50W removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR removeBEHRINGER MS16 2x8W 2-Way Active Personal Monitor System pair removeADAM A3X Active Studio Monitor 25W remove
NameDYNAUDIO LYD-5 Active Studio Monitor Speaker (Piece) removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR removeEDIROL DM-2100 2.1 SYSTEM 2 SATELLITE 15W 1 SUB 50W removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR removeBEHRINGER MS16 2x8W 2-Way Active Personal Monitor System pair removeADAM A3X Active Studio Monitor 25W remove
Imagems16 personal monitor behringer 16w active pair αυτοενισχυόμενο 2x8w
SKUH00DY00009040050DM-2100Solo6 BeE005319A3X
Rating
Price 419.00 incl. GR VAT 155.00 incl. GR VAT 378.80 incl. GR VAT 995.00 incl. GR VAT 112.00 incl. GR VAT 365.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

Available on backorder

In stock (can be backordered)

In stock

AvailabilityAvailable on backorderAvailable on backorderIn stockAvailable on backorderIn stock (can be backordered)In stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Perfect for Home Studios and Multimedia Applications
  • 2-Way Studio Monitors with 2 x 8 Watts Power Output
  • Dedicated Volume, Mic Level, Bass and Treble Controls
  • Powerful 4'' Woofers and High-Resolution 1.5'' Tweeters
  • 1/8'' TRS Stereo and RCA Stereo Input Connectors
Content

- Nearfield Monitor with 5" Woofer - Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification - Bass extension to extend or curtail the low end frequency response - Two different tunings: one for free standing and one designed for speakers within 50 cm of wall - Sound balance to influence the overall response of the speaker

The LYD 5 is our premium small-format near-field monitor. With its low volume precision, LYD is the perfect fit for smaller setups and home studios. LYD uses lightweight aluminium wire and voice coils in its handmade drive units, along with a state-of-the-art Class-D amplifier with a 96 kHz / 24bit signal path and DSP used just right to provide outstanding performance. The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.

Frequency Response: 50 Hz - 21 kHz Max SPL 1m, pair (IEC Short Term): 106 dB Principle: Bass reflex Crossover Freq.: 5200 Hz Tweeter: 28mm Soft Dome Woofer: 5'' Amplifier: HF 50W/LF 50W Class-D I/O Connectors: XLR Balanced: RCA Unbalanced Dimensions (W x H x D): 170 x 260 x 211mm Weight: 5.4 kg

Type:Bass Reflex Active
Woofer: 5"
Tweeter: 28mm Soft Dome
Amplifiers Power: HF 50W/LF 50W Class-D
Input/Output Plugs: XLR Balanced: RCA Unbalanced
Frequency Response: 50 Hz - 21 kHz
Dimensions (W x H x D): 170 x 260 x 211mm
Weight: 5.4 kg
 

Features

    Professional 2-way active DJ monitors
    Output: 2x 30 W RMS
    Frequency response: 35 Hz - 20 kHz
    S/N Ratio: > 75 dB
    Impedance: 8 ohm
    Magnetically shielded bass drivers
    Speakers: 13.34 cm (5.25“) bass, 2.54 cm (1“) tweeter



    Technical Data

    Dimensions: 232 x 320 x 180 mm
    Weight: 5.0 kg (per piece)

DM-2100: 2.1-ch Speaker System Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.

  • Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
  • Powered bass reflex speakers with 15 watts per side and flat frequency response
  • Active subwoofer with 50-watt amplifier for increased low end
  • Front-mounted controls convenient located on right speaker
  • Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
  • Sleek black wooden cabinets with magnetic shielding

Rated Output Power50W + 15W + 15WSpeakerSubwoofer: 16cm, Satellite Units: 9.2cmNominal Input LevelLine 1: -10dBu, Line 2: -10dBuInput Impedance18k ohmControlsR Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase SwitchConnectorsR Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In JackDigital InputSampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bitsPower SupplyAC117, 230 or 240VAccessoriesSpeaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power CableSize and Weight ( Satellite Units )Width130 mm5-1/8 inchesDepth160 mm6-5/16 inchesHeight200 mm7-7/8 inchesWeight

Size and Weight ( SubWoofer )Width240 mm9-1/2 inchesDepth300 mm11-13/16 inchesHeight330 mm13 inches

The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 113dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Visualization and control :

Input sensitivity selector
Adjustable tweeter and woofer levels with potentiometers
Power On/off switch
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Woofer : 6W4370B, 6-1/2" (16.5cm) Focal "W" composite sandwich cone speaker
Tweeter : Focal TB871 Beryllium inverted dome tweeter
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 13 x 9-7/16 x 11-7/16 " (330x240x290mm)
Weight : 24.2lb (11kg)

 

Behringer MS-16 2x8W 2-Way Active Personal Monitor System The Behringer MS16 Studio Monitors feature an active 2-way design with powerful 4'' woofers and 1.5'' tweeters, powered by two 8 watt amplifiers. Offering two line inputs and a microphone input, the Behringer MS16 monitors are perfect for both home studios and general multimedia applications.

Full Description

Compact and Ideal For Home Studio

The Behringer MS16 Studio Monitors, Pair are the ideal studio monitor for your home studio project. Whether that be mixing, producing, or even listening the MS16 Studio Monitors turn your computer into a personal home studio. Its powerful 4" woofers provide thumping bass, whilst the high resolution tweeters provide clean high frequencies. Also featured are dedicated volume, bass and treble controls for extra flexibility. They also make excellent add-on speakers for electronic keyboards and playing a live performance.

Input Connections

The MS16 Studio Monitors feature multiple input options featuring a 1/8" stereo input for connecting up CD, MD and MP3 players. The dual RCA jacks allow for stereo keyboard modules and tape decks. Furthermore there is a 1/4" inch to allow connections for a dynamic microphone or electric guitar enabling you to sign or play along with prerecorded tracks.

Features

  • Compact stereo speaker system ideally suited for home studios, multimedia applications, keyboard and vocal monitoring, etc.
  • Powerful 4'' woofers and high-resolution tweeters powered by two 8 watt amplifiers
  • Dedicated Volume, Bass and Treble controls for more flexibility
  • Stereo RCA inputs for sound cards, keyboards, etc. that can be used simultaneously with a second stereo source (e. g. CD/MD player) through 1/8'' TRS stereo input
  • Separately adjustable 1/4'' TRS microphone input mixable with stereo inputs for playback and vocal monitoring applications
  • 1/8'' TRS headphone connector with auto-mute loudspeaker function
  • Magnetically shielded for placement near computer monitors
  • Designed and engineered in Germany

Specifications

  • Woofer: 4''
  • Tweeter: 1.5''
  • Output Power: 2 x 8 Watts
  • Frequency Response: 80Hz - 20kHz
  • Speaker Impedance: 4?
  • Input 1:
    • Connector: 1/8'' TRS Stereo
    • Input Level: -10dBm, 10k?
  • Input 2:
    • Connector: RCA Stereo
    • Input Level: -10dBm, 10k?
  • Mic Input:
    • Connector: 1/4'' TRS
    • Input Level: -50dBm, 50?
  • Dimensions: 9.5'' x 5.5'' x 6'' / 241mm x 140mm x 150mm (H x W x D)
  • Weight: 4kg
 

PRICE PER UNIT

The smallest big sound ever...

With the A3X, ADAM Audio present their smallest monitor to date, making it perfectly suited for all environments where space is limited but sound shouldnʼt be constricted. The A3X combines a tiny footprint with the much acclaimed ADAM sound quality by using the X-ART tweeter for the higher frequencies, a guarantee for crystal clear music reproduction.

A 4.5” (basket) driver handles the lower registers. The diaphragm is made from carbon fiber, a material that is very light but very stiff and therefore capable of delivering colouring-free sound. Two built-in 25 Watt amplifiers powers each of the drivers directly.

Stereolink

A very handy and exclusive technology found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker.

This new technology connects two A3X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakerʼs gain control. This makes the A3X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily.

Controls and Connectors

The front of the A3X sports dual ports for surprisingly low frequency response down to 60Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting.

Review: "Highly recommended“

"Iʼve used various monitors for my computer work before, but never of the caliber of the A3X series. Before these, I would have to redo my mixes significantly when transitioning from the small cheapies to the big 'real ones'. The ADAM Audio A3Xʼs save me a step by providing both great sound in a compact format and by changing mundane audio task-work into a quality listening experience. If you use good monitors from the outset, youʼll learn your music that much faster so that when it comes time for mixdown and mastering on your big boxes, youʼll already be acclimated to your songʼs subtler sonic aspects—aspects revealed only by the A3Xʼs with their sweet, smooth top end, and impressive handling of bass frequencies. Highly recommended.“
(Jon Chappell, Harmony Central, 03/10)

Review: "...one of the best compact monitors“

"ADAM´s A3X as the smallest monitor with a X-ART tweeter to date has convinced us in every respect. It´s one of the best compact monitors we have ever reviewed and with its almost shameless low price it´s worth every penny. (Professional Audio, 05/10)

Mid-Woofer
Number1
Basket Ø4.5" (120 mm)
Voice coil Ø1" (25 mm)
Cone materialCarbon Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypeA/B
Amp. power RMS / music25 W / 40 W
Tweeter1
TypeA/B
Amp. power RMS / music25 W / 40 W
Control panel
Input Sensitivity-∞ to +14 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response60 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.8 %
Long term output≥98 dB
Max. peak≥106 dB
Crossover frequencies2800 Hz
Input impedance10 KOhm
Weight10.1 lb (4,6 kg)
Magnetically shieldedNo
Height x Width x Depth10" (252 mm) x 6" (150 mm) x 7.5" (185 mm)
Warranty5 Years
Delivery contents

Cinch-cable, Power cord, Manual

Weight5.40 kg3.50 kg15.00 kg11.00 kg4 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.40 kg
Weight 3.50 kg
Weight 15.00 kg
Weight 11.00 kg
Weight 4 kg
Weight 5.00 kg