– Nearfield Monitor with 5″ Woofer – Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification – Bass extension to extend or curtail the low end frequency response – Two different tunings: one for free standing and one designed for speakers within 50 cm of wall – Sound balance to influence the overall […]
– Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification
– Bass extension to extend or curtail the low end frequency response
– Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
– Sound balance to influence the overall response of the speaker
The LYD 5 is our premium small-format near-field monitor. With its low volume precision, LYD is the perfect fit for smaller setups and home studios. LYD uses lightweight aluminium wire and voice coils in its handmade drive units, along with a state-of-the-art Class-D amplifier with a 96 kHz / 24bit signal path and DSP used just right to provide outstanding performance.
The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.
Frequency Response: 50 Hz – 21 kHz
Max SPL 1m, pair (IEC Short Term): 106 dB
Principle: Bass reflex
Crossover Freq.: 5200 Hz
Tweeter: 28mm Soft Dome
Woofer: 5”
Amplifier: HF 50W/LF 50W Class-D
I/O Connectors: XLR Balanced: RCA Unbalanced
Dimensions (W x H x D): 170 x 260 x 211mm
Weight: 5.4 kg
Type:
Bass Reflex Active
Woofer:
5″
Tweeter:
28mm Soft Dome
Amplifiers Power:
HF 50W/LF 50W Class-D
Input/Output Plugs:
XLR Balanced: RCA Unbalanced
Frequency Response:
50 Hz – 21 kHz
Dimensions (W x H x D):
170 x 260 x 211mm
Weight:
5.4 kg
Weight
5.40 kg
Reviews
There are no reviews yet.
Be the first to review “DYNAUDIO LYD-5 Active Studio Monitor Speaker (Piece)” Cancel reply
- Nearfield Monitor with 5" Woofer
- Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification
- Bass extension to extend or curtail the low end frequency response
- Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
- Sound balance to influence the overall response of the speaker
The LYD 5 is our premium small-format near-field monitor. With its low volume precision, LYD is the perfect fit for smaller setups and home studios. LYD uses lightweight aluminium wire and voice coils in its handmade drive units, along with a state-of-the-art Class-D amplifier with a 96 kHz / 24bit signal path and DSP used just right to provide outstanding performance.
The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.
Frequency Response: 50 Hz - 21 kHz
Max SPL 1m, pair (IEC Short Term): 106 dB
Principle: Bass reflex
Crossover Freq.: 5200 Hz
Tweeter: 28mm Soft Dome
Woofer: 5''
Amplifier: HF 50W/LF 50W Class-D
I/O Connectors: XLR Balanced: RCA Unbalanced
Dimensions (W x H x D): 170 x 260 x 211mm
Weight: 5.4 kg
Type:
Bass Reflex Active
Woofer:
5"
Tweeter:
28mm Soft Dome
Amplifiers Power:
HF 50W/LF 50W Class-D
Input/Output Plugs:
XLR Balanced: RCA Unbalanced
Frequency Response:
50 Hz - 21 kHz
Dimensions (W x H x D):
170 x 260 x 211mm
Weight:
5.4 kg
High-Resolution, Active 2-Way Reference Studio Monitor with 5.25" Kevlar Woofer
Ultra-linear studio monitor with true active design
Precision Class A/B amplifiers with active protection circuits: 50 W for LF / 25 W for HF
Ultra-high resolution, ferrofluid-cooled 1" dome tweeter for ultimate sound reproduction
Long-throw 5.25" woofer with deformation-resistant Kevlar cone for ultimate bass response
Ultimate dispersion characteristics and extremely large "sweet spot" owing to advanced wave guide technology
High-precision crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions
Separately controlled limiter for low and high frequency overload protection
Magnetic shielding allows placement near computer monitors
“Planet Earth" power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
Servo-balanced inputs with XLR, 1/4" and unbalanced RCA connectors
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
“Wonderfully detailed, with an exceptionally transparent mid-range. [...] ADAM make the leap to a three-way speaker design that seems to pay dividends in clarity and separation. [...] I think it would be fair to say theyʽre the best sounding ADAM monitors Iʽve reviewed.” (Sound On Sound, 12/2009)
“No doubt, the S3X-V deserve the title Reference Monitor. With this series, ADAM Audio proves to have a very good feeling for meeting the specific demands of the sound engineerʽs guild, creating studio standards at the same time. [...] A precision tool combined with a luxury good.” (www.96kHz.de, 03/2010)
Woofer
Number
1
Basket Ø
9" (228 mm)
Voice coil Ø
2" (50 mm)
Cone material
HexaCone
Midrange
Number
1
Basket Ø
4.5" (116 mm)
Voice coil Ø
1" (25 mm)
Cone material
HexaCone
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Woofer
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Midrange
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Tweeter
1
Type
A/B
Amp. power RMS / music
50 W / 100 W
Control panel
Input Sensitivity (coarse)
-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)
-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz
0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz
±4 dB (1 dB steps)
Low Shelf EQ
±4 dB (1 dB steps)
Tweeter gain
±2 dB (0.5 dB steps)
Input connectors
Analog
XLR
Digital (optional)
AES/EBU / SPDIF / word clock
General data
Panel
Front
Frequency response
32 Hz - 50 kHz
THD > 80 Hz
≤0.6 %
Long term output
≥114 dB
Max. peak
≥124 dB
Crossover frequencies
350 / 2800 Hz
Input impedance
10 KOhm
Weight
34 lb (15,4 kg)
Magnetically shielded
Optional
Height x Width x Depth
19" (485 mm) x 11" (281 mm) x 11.5" (295 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
MYTHO 8 is a two-way reference studio monitor equipped with two separate AB amplifiers - 200 W for the low frequencies and 100 W for the high - unparalleled for low distortion and natural sound. It features a high quality large metal dome tweeter for the best vocal reproduction and a 8” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. Thanks to the deeper low frequencies reproduced by its 8” woofer, the MYTHO 8 is perfect for medium to large control rooms.
A dedicated high quality DSP is provided on board. The cabinet is made in aluminium, internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
The CMS 50 is the most compact monitoring loudspeaker of all the Focal Professional range. Its design permits listening from 50cm away, while still keeping the possibility of the monitors at a great distance from one another without damaging the soundstage. The 5” mid-woofer reaches down to 55Hz, while offering a controlled bass and a totally linear midrange. The midrange register of the CMS 50 has unequalled neutrality in its price range. The Al-Mg inverted dome tweeter offers outstanding dynamics and a degree of definition in the treble that allow precise measurement of reverb and other effects which are normally very difficult to assess.
Power ON / OFF LED
Standby / ON LED
Audio Clip LED
Woofer :
5" Focal drive unit, Polyglass cone
Tweeter :
Aluminum/Magnesium inverted dome Focal tweeter
Shielding :
Integral by cancellation magnet
Construction :
Reinforced and damped Aluminum cabinet
Finish :
Black powder cabinet
Dimensions with spikes :
289.5 x 190 x 201mm (11.4" x 7.5" x 7.9“)
Dimensions with table stand :
299.5 x 190 x 201mm (11.8" x 7.5" x 7.9“)
Net weight :
7.7kg - (17lb)
Features of the HR824mk2 Studio Reference Monitor:
- High-resolution Active studio reference monitor
- Ultra-linear frequency response for accurate mix translation
- 8.75 in. high-precision, low-distortion LF transducer
- 1 in. titanium dome, ferrofluid cooled tweeter
- Optimized Waveguide for wide, even sweet zone
- Twin FR Series amps -- 150W for LF / 100W for HF
- Cast aluminum Zero Edge Baffle minimizes diffraction
- Full internal damping eliminates midrange artifacts
- Onboard passive radiator extends bass response to 35Hz
- Acoustic Space, LF roll-off, and HF controls
- Balanced XLR, TRS, and unbalanced RCA inputs
- OmniMount ready for easy wall/ceiling placement
- THX pm3 certified for surround sound applications
- Perfect for High Definition audio, cinema and gaming systems
Dimensions and Weight in PackagingShipping Weight: 41 lbs Shipping Dimensions: 14 x 18 x 22 in
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.