DYNAUDIO LYD-5 Active Studio Monitor Speaker (Piece)

419.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
– Nearfield Monitor with 5″ Woofer – Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification – Bass extension to extend or curtail the low end frequency response – Two different tunings: one for free standing and one designed for speakers within 50 cm of wall – Sound balance to influence the overall […]

 

Read more

– Nearfield Monitor with 5″ Woofer

– Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification

– Bass extension to extend or curtail the low end frequency response

– Two different tunings: one for free standing and one designed for speakers within 50 cm of wall

– Sound balance to influence the overall response of the speaker

The LYD 5 is our premium small-format near-field monitor. With its low volume precision, LYD is the perfect fit for smaller setups and home studios. LYD uses lightweight aluminium wire and voice coils in its handmade drive units, along with a state-of-the-art Class-D amplifier with a 96 kHz / 24bit signal path and DSP used just right to provide outstanding performance.

The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.

Frequency Response: 50 Hz – 21 kHz

Max SPL 1m, pair (IEC Short Term): 106 dB

Principle: Bass reflex

Crossover Freq.: 5200 Hz

Tweeter: 28mm Soft Dome

Woofer: 5”

Amplifier: HF 50W/LF 50W Class-D

I/O Connectors: XLR Balanced: RCA Unbalanced

Dimensions (W x H x D): 170 x 260 x 211mm

Weight: 5.4 kg

Type: Bass Reflex Active
Woofer: 5″
Tweeter: 28mm Soft Dome
Amplifiers Power: HF 50W/LF 50W Class-D
Input/Output Plugs: XLR Balanced: RCA Unbalanced
Frequency Response: 50 Hz – 21 kHz
Dimensions (W x H x D): 170 x 260 x 211mm
Weight: 5.4 kg

 

Weight 5.40 kg

Reviews

There are no reviews yet.

Be the first to review “DYNAUDIO LYD-5 Active Studio Monitor Speaker (Piece)”

Your email address will not be published. Required fields are marked *

Quick Comparison

DYNAUDIO LYD-5 Active Studio Monitor Speaker (Piece) removeBEHRINGER MS20 24-Bit-192 kHz Digital 20-Watt Stereo Near Field Monitors pair removeADAM A8X Active Studio Monitor 150W removeEDIROL DM-2100 2.1 SYSTEM 2 SATELLITE 15W 1 SUB 50W removeADAM S3X-V Active Studio Monitor 250W removeADAM S2X Active Studio Monitor 250W remove
NameDYNAUDIO LYD-5 Active Studio Monitor Speaker (Piece) removeBEHRINGER MS20 24-Bit-192 kHz Digital 20-Watt Stereo Near Field Monitors pair removeADAM A8X Active Studio Monitor 150W removeEDIROL DM-2100 2.1 SYSTEM 2 SATELLITE 15W 1 SUB 50W removeADAM S3X-V Active Studio Monitor 250W removeADAM S2X Active Studio Monitor 250W remove
Image
SKUH00DY00009E005320A8XDM-2100S3XVS2X
Rating
Price 419.00 incl. GR VAT 119.00 incl. GR VAT 1,045.00 incl. GR VAT 378.80 incl. GR VAT 2,197.73 incl. GR VAT 1,394.99 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityIn stockAvailable on backorderAvailable on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

- Nearfield Monitor with 5" Woofer - Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification - Bass extension to extend or curtail the low end frequency response - Two different tunings: one for free standing and one designed for speakers within 50 cm of wall - Sound balance to influence the overall response of the speaker

The LYD 5 is our premium small-format near-field monitor. With its low volume precision, LYD is the perfect fit for smaller setups and home studios. LYD uses lightweight aluminium wire and voice coils in its handmade drive units, along with a state-of-the-art Class-D amplifier with a 96 kHz / 24bit signal path and DSP used just right to provide outstanding performance. The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.

Frequency Response: 50 Hz - 21 kHz Max SPL 1m, pair (IEC Short Term): 106 dB Principle: Bass reflex Crossover Freq.: 5200 Hz Tweeter: 28mm Soft Dome Woofer: 5'' Amplifier: HF 50W/LF 50W Class-D I/O Connectors: XLR Balanced: RCA Unbalanced Dimensions (W x H x D): 170 x 260 x 211mm Weight: 5.4 kg

Type:Bass Reflex Active
Woofer: 5"
Tweeter: 28mm Soft Dome
Amplifiers Power: HF 50W/LF 50W Class-D
Input/Output Plugs: XLR Balanced: RCA Unbalanced
Frequency Response: 50 Hz - 21 kHz
Dimensions (W x H x D): 170 x 260 x 211mm
Weight: 5.4 kg
 

Behringer MS-20 24-Bit/192 kHz Digital 20-Watt Stereo Near Field Monitors

OVERVIEW

The MS20 Studio Monitors from Behringer are a pair of extremely compact, 2 x 10-Watt nearfield monitors that feature high-resolution 24-bit/192 kHz D/A converters. With the MS20, you can connect directly to your digital signal sources and eliminate annoying analog line-loss and hum forever. Whether you connect to your computer sound card, keyboard, or MP3 player, you will enjoy exceptional sound quality with great dynamics. The built-in amplifiers provide lots of headroom, while the powerful woofers and tweeters provide ultra-linear frequency response.

The MS20 connectivity includes stereo 1/8" and RCA jacks, which can be used simultaneously or mixed with a digital stereo source. Digital duties are handled by either RCA or TOSLINK sockets, providing for ultra-simple hookup. Individual volume controls for both Line inputs plus Bass and Treble EQ controls are provided on the front panel, along with a 1/4" headphone jack that automatically mutes the internal speakers.

Sound Quality
Sporting 3.625" woofers and 2.5" high-resolution tweeters, MS20 monitor speakers bring quality audio within the reach of anyone that operates a computer workstation. Whether you're a musician tracking your latest masterpieces, or just someone who listens to your favorite songs at work, MS20 loudspeakers will make them sound significantly better. They also make excellent add-on speakers for electronic keyboards. Front-mounted volume and individual bass and treble controls make accurate sound adjustments a breeze.

Built-in Mixer
The MS20 takes audio to an even higher level with its multiple input options. The built-in mixer features 1/8" stereo inputs for connecting CD/MD/MP3 players, dual RCA jacks for tape decks and stereo keyboard modules, and even both RCA and TOSLINK connectors for digital signal sources. This adds up to a system that lets you play along with a variety of prerecorded tracks. And you can wail away to your heart's content in total privacy, thanks to MS20's powerful headphone jack.

 FEATURES

  • 2-Way active studio monitor pair
  • Ideally suited for computer studios, multimedia workstations and keyboards
  • Built-in 2 x 10-Watt powerful amplifiers with lots of headroom
  • Powerful woofers and high-resolution tweeters
  • High-resolution 24-bit/192 kHz D/A converters for extended dynamic range
  • Optical and coaxial inputs to directly connect digital audio sources by S/PDIF interface
  • Two stereo analog inputs featuring 1/4'' TRS and stereo RCA connectors
  • Individual volume controls for both Line inputs plus Bass and Treble EQ controls
  • 1/4'' TRS headphone connector with auto-mute loudspeaker function easily accessible on the front panel

SPECIFICATIONS

MS20 Digital Monitor Speakers (Pair)

  • Loudspeakers
    Tweeter: ˜ 65 mm (2 1/2“), 8 ?
    Woofer: ˜ 92 mm (3 5/8“), 4 ?
    Audio Inputs
    Line 1: 1/8" TRS stereo, impedance 20 k?
    Line 2: 2 RCA, impedance 20 k?
    Digital Inputs
    Optical: TOSLINK
    Coaxial: RCA
    Converter: 24-bit
    Sample rate: System Specs
    Output power: 2 x 20W
    Frequency response: 50Hz to 25kHz
    Power Supply
    Mains Voltages: USA/Canada 120 V, 60 Hz
    Power Consumption: 80W
   

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)

Mid-Woofer
Number1
Basket Ø8.5" (220 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music150 W / 225 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥112 dB
Max. peak≥120 dB
Crossover frequencies2300 Hz
Input impedance30 KOhm
Weight28.7 lb (13 kg)
Magnetically shieldedNo
Height x Width x Depth15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual



DM-2100: 2.1-ch Speaker System Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.

  • Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
  • Powered bass reflex speakers with 15 watts per side and flat frequency response
  • Active subwoofer with 50-watt amplifier for increased low end
  • Front-mounted controls convenient located on right speaker
  • Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
  • Sleek black wooden cabinets with magnetic shielding

Rated Output Power50W + 15W + 15WSpeakerSubwoofer: 16cm, Satellite Units: 9.2cmNominal Input LevelLine 1: -10dBu, Line 2: -10dBuInput Impedance18k ohmControlsR Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase SwitchConnectorsR Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In JackDigital InputSampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bitsPower SupplyAC117, 230 or 240VAccessoriesSpeaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power CableSize and Weight ( Satellite Units )Width130 mm5-1/8 inchesDepth160 mm6-5/16 inchesHeight200 mm7-7/8 inchesWeight

Size and Weight ( SubWoofer )Width240 mm9-1/2 inchesDepth300 mm11-13/16 inchesHeight330 mm13 inches

PRICE PER UNIT

 

S3X-V

Using the newly developed 4” HexaCone midrange and 9” HexaCone woofer combined together with the X-ART tweeter creates the unique S3X-V control monitor.

A step up over the smaller models, the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio, the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long time, non-fatiguing listening sessions.

Reviews: "Wonderfully detailed...”

“Wonderfully detailed, with an exceptionally transparent mid-range. [...] ADAM make the leap to a three-way speaker design that seems to pay dividends in clarity and separation. [...] I think it would be fair to say theyʽre the best sounding ADAM monitors Iʽve reviewed.” (Sound On Sound, 12/2009)

“No doubt, the S3X-V deserve the title Reference Monitor. With this series, ADAM Audio proves to have a very good feeling for meeting the specific demands of the sound engineerʽs guild, creating studio standards at the same time. [...] A precision tool combined with a luxury good.” (www.96kHz.de, 03/2010)

Woofer
Number1
Basket Ø9" (228 mm)
Voice coil Ø2" (50 mm)
Cone materialHexaCone
Midrange
Number1
Basket Ø4.5" (116 mm)
Voice coil Ø1" (25 mm)
Cone materialHexaCone
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Woofer1
TypePWM
Amp. power RMS / music250 W / 350 W
Midrange1
TypePWM
Amp. power RMS / music250 W / 350 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 100 W
Control panel
Input Sensitivity (coarse)-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz±4 dB (1 dB steps)
Low Shelf EQ ±4 dB (1 dB steps)
Tweeter gain±2 dB (0.5 dB steps)
Input connectors
AnalogXLR
Digital (optional)AES/EBU / SPDIF / word clock
General data
PanelFront
Frequency response32 Hz - 50 kHz
THD > 80 Hz≤0.6 %
Long term output≥114 dB
Max. peak≥124 dB
Crossover frequencies350 / 2800 Hz
Input impedance10 KOhm
Weight34 lb (15,4 kg)
Magnetically shieldedOptional
Height x Width x Depth19" (485 mm) x 11" (281 mm) x 11.5" (295 mm)
Warranty5 Years
Delivery contents

Power cord, Manual

 

 

 

PRICE PER UNIT

 

S2X

The S2X brings together the virtues of the ʽclassicalʼ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials.

The HexaCone 7” woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.

 

Review at a glance: "Sonic sensation“

“The ADAM Audio S2X can convince in all areas, concerning the sound as well as the workmanship, and are worth every Euro. […] a no-compromise tool for all who mean serious business, whether in music or postproductions.” (www.96kHz.de, 03/2010)

“We started off with a classical string quartet recording and let´s just say right away that the S2Xs floored us. Several adjectives spring to mind [...] - wide open, transparent, effortless, breathtaking realistic, loud, dynamic, involving... [...] If you close your eyes and continue listening, the S2Xs seem to ‚disappearʽ almost entirely. [...] you gradually become less aware that you´re listening to speakers because they´re like an open window on the music itself. [...] Result: These monitors are up there with the best we´ve tried so far.” (MusicTech, 01/2010)

Woofer
Number1
Basket Ø7.5" (186 mm)
Voice coil Ø2" (50 mm)
Cone materialHexaCone
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Woofer1
TypePWM
Amp. power RMS / music250 W / 350 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 100 W
Control panel
Input Sensitivity (coarse)-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz±4 dB (1 dB steps)
Low Shelf EQ ±4 dB (1 dB steps)
Tweeter gain±2 dB (0.5 dB steps)
Input connectors
AnalogXLR
Digital (optional)AES/EBU / SPDIF / word clock
General data
PanelFront
Frequency response35 Hz - 50 kHz
THD > 80 Hz≤0.8 %
Long term output≥110 dB
Max. peak≥120 dB
Crossover frequencies2200 Hz
Input impedance10 KOhm
Weight23.8 lb (10,8 kg)
Magnetically shieldedOptional
Height x Width x Depth14.5" (370 mm) x 8.5" (220 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual

 

 

Weight5.40 kg6.00 kg13.00 kg15.00 kg16.00 kg11.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.40 kg
Weight 6.00 kg
Weight 13.00 kg
Weight 15.00 kg
Weight 16.00 kg
Weight 11.00 kg