Content |
BM5 BLACK
The Dynaudio Acoustics nearfield monitor BM5 is a 2-way passive system comprising a 175mm (6.5?)woofer and a 28mm (1.25?) soft dome tweeter with neodynium magnet, housed in a front ported cabinetThe BM5 is a clean, powerful and accurate monitorwhere excellent results are achieved with good quality amplifiers. The BM5 is specifically designed for use in computer-based project studios where themonitor needs to be magnetically shielded. This is achieved by incorporating a high frequency soft dome driver that has a neodymium magnet housed within the aluminium voice coil to preventits magnetic field from affecting computer monitors. It also has a port in the front baffle making it inherently suitable for mounting within an enclose area ? i.e. surround channels for television post production.
Specifications: System 2-way Passive Nearfield Monitor Frequency Response (+/- 3 dB) 55 Hz - 29 kHz Peak SPL 1m, pair (IEC Short Term) > 126 dB peak Peak SPL 2m, 5.1 (IEC Short Term) > 127.5 dB peak Amplifier minimum 30 W (> 94 dB SPL @ 1m) Sensitivity (2.83 V/1m) 87 dB Impedance, Nominal 4 ohm Impedance, HF (200 kHz) 10,4 ohm Resonance Frequency 50 Hz Internal Cabinet Volume 9,1 liters Bass Principle Bass reflex Crossover Frequencies 4500 Hz Crossover Slope Tweeter 12 dB/oct Tweeter 28 mm soft dome, Neodymium magnet, pure alu wire voice coil, magnetic shielded Woofer 17 cm, One-piece molded polypropylene cone, 75 mm pure alu wire voice coil Weight 5,7 kg Dimensions (WxHxL) 204 x 310 x 252 mm
|
One 1" pure aluminum dome tweeter.
One 6-1/2" BDSS cast basket driver pressure coupled
to one 6“x10" low bass radiator.
Freq. Response: 32 Hz - 30 kHz.
Impedance: 8 Ohms.
Sensitivity: 90 dB.
Rec. Ampl. Power: 20 - 225 watts.
Inputs: Bi-amp/bi-wire 5 way binding post terminals.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim.
Dimensions: 32.9 x 20 x 31 cm.
Weight: 7 kg each.
|
This 2-way passive full range studio monitor loudspeaker which incorporates an 8? low frequency transducer and a 0.75 inch aluminium dome high frequency transducer. The system's low frequency driver is mounted as a direct radiator in a bass-reflex cabinet constructed of MDF wood, with solid Iroko side panels. The tuning port is located at the rear to minimize turbulence noise and two M6 mounting points are located on the bottom panel of the enclosure. The acoustically transparent cloth grille system is detachable.
FEATURES: 2-way near/mid-field studio monitor 8" low frequency speaker 1" aluminum dome fluid cooled tweeter LQS? waveguide for dispersion control 125 W power handling
SPECIFICATIONS: RMS (Average) Power HandlingR:125 W Program Power HandlingP:250 W Peak Power HandlingK: >500 W Recommended Amplifier:125 W to 250 W at 8 Ω On-axis Frequency RangeF:38 Hz - 33 kHz Nominal Impedance: 8 Ω Minimum ImpedanceI:3.2 Ω (at 15 kHz) On-axis Sensitivity 1W / 1 mS: 89 dB SPL Rated Peak SPL at Full Power: 116 dB Nominal -6 dB BeamwidthsB:120° Horizontal (average, 500 Hz to 8 kHz) 95° Vertical Enclosure Material:MDF with Iroko wood side panels Color:Black/Iroko wood Connectors:Binding posts Dimensions (H x W x D):42 x 28 x 29 cm(16.5 x 11 x 11.5 in) Mounting:2 x M6 points Weight: 12.8 kg (28 lbs) Shipping Weight: 14 kg (31 lbs) |
Mini Monitor Speaker Metal cone loudspeakers Power: 200 WRMS Frequency response: 65Hz-22KHz Sensitivity: 88db Height 30cm Impact resistance: 8Ω Color: Black
|
The Monitor 6 is a 2-way passive full range studio monitor
loudspeaker which incorporates a 6.5 inch cone low frequency
transducer and a 0.75 inch aluminium dome high frequency
transducer. The system?s low frequency driver is mounted
as a direct radiator in a bass-reflex cabinet constructed of
MDF wood, with solid Iroko side panels. The tuning port is
located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure.
The acoustically transparent cloth grille system is detachable.
FEATURES:
2-way near field studio monitor
6.5" low frequency speaker
.75" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
100 W power handling
SPECIFICATIONS:
RMS (Average) Power HandlingR:100 W
Program Power HandlingP: 200 W
Peak Power HandlingK: >400 W
Recommended Amplifier: 100 W to 200 W at 8 Ω
On-axis Frequency RangeF: 44 Hz - 40 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI: 7.2 Ω (at 174 Hz)
On-axis Sensitivity 1W / 1 mS: 85 dB SPL
Rated Peak SPL at Full Power: 111 dB
Nominal -6 dB BeamwidthsB:125° Horizontal
(average, 500 Hz to 8 kHz) 106° Vertical
Enclosure Material: MDF with Iroko wood
Color: Black/Iroko wood
Connectors: Binding posts
Dimensions (H x W x D): 34 x 23 x 27 cm (13.5 x 6.5 x 10.5 in)
Mounting: 2 x M6 points
Weight: 6.9 kg (15.2 lbs)
Shipping Weight: 8.1 kg (18.8 lbs)
|
Dimensions | Metric :6-15/16” W x 9-11/16” D x 10-11/16” H | 17.6 x 24.6 x 27.1 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 5-1/2" high definition bass/midrange driver pressure coupled to one 8” bass radiator
Frequency Response :26 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :20 – 200 watts
A/V Receiver Crossover Setting :60 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Piano-Gloss Black
Included Accessories :Keyhole bracket (with 2 screws to mount to speaker)
Mounting Options :Vertically: On Shelf; On Wall with optional included keyhole bracket for flush mounting
Packaging :Two to a carton
Weight | Metric :14 lbs | 6.4 kg
Warranty :5 Years |
Reviews
There are no reviews yet.