DYNAUDIOACOUSTICS BM5 BLACK PASSIVE MONITOR 100W

BM5 BLACK

The Dynaudio Acoustics nearfield monitor BM5  is
a 2-way passive system comprising a 175mm (6.5?)woofer
and a 28mm (1.25?) soft dome tweeter with neodynium
magnet, housed in a front ported cabinetThe BM5  is
a clean, powerful and accurate monitorwhere excellent
results are achieved with good quality amplifiers. The BM5
is specifically designed for use in computer-based project
studios where themonitor needs to be magnetically shielded.
This is achieved by incorporating a high frequency soft dome
driver that has a neodymium magnet housed within the
aluminium voice coil to preventits magnetic field from
affecting computer monitors. It also has a port in the
front baffle making it inherently suitable for mounting
within an enclose area ? i.e. surround channels for
television post production.

Specifications:
System 2-way Passive Nearfield Monitor
Frequency Response
(+/- 3 dB) 55 Hz - 29 kHz
Peak SPL 1m, pair
(IEC Short Term) > 126 dB peak
Peak SPL 2m, 5.1
(IEC Short Term) > 127.5 dB peak
Amplifier minimum 30 W (> 94 dB SPL @ 1m)
Sensitivity (2.83 V/1m) 87 dB
Impedance, Nominal 4 ohm
Impedance, HF (200 kHz) 10,4 ohm
Resonance Frequency 50 Hz
Internal Cabinet Volume 9,1 liters
Bass Principle Bass reflex
Crossover Frequencies 4500 Hz
Crossover Slope Tweeter 12 dB/oct
Tweeter 28 mm soft dome, Neodymium magnet, pure alu wire voice coil, magnetic shielded
Woofer 17 cm, One-piece molded polypropylene cone, 75 mm pure alu wire voice coil
Weight 5,7 kg
Dimensions (WxHxL) 204 x 310 x 252 mm

One 1" pure aluminum dome tweeter.
One 5-1/4" BDSS driver.
Freq. Response: 35 Hz - 30 kHz,
Impedance: 8 Ohms,
Sensitivity: 90 dB,
Rec. Ampl. Power: 20 - 150 watts,
Inputs: One pair of 5 way binding posts.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim
Dimensions: 29.7 x 17.2 x 29.6 cm,
Weight: 5.5 kg each

Info

The first in JBLʼs new 7 Series line, the 705i and 708i models answer the call for next generation multi-channel monitoring in post rooms, broadcast facilities and trucks. Leveraging patented technologies developed for our flagship M2 Master Reference Monitor, 7 Series deliver detailed imaging, extended frequency response and remarkable output from compact enclosures. Centrally amplified and tuned, and easily installed, 705i and 708i are the heart of an elegant, scalable system for broadcast and post facilities working in immersive audio formats.

Dimensions | Metric :6-15/16” W x 9-11/16” D x 10-11/16” H | 17.6 x 24.6 x 27.1 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 5-1/2" high definition bass/midrange driver pressure coupled to one 8” bass radiator
Frequency Response :26 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :20 – 200 watts
A/V Receiver Crossover Setting :60 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Piano-Gloss Black
Included Accessories :Keyhole bracket (with 2 screws to mount to speaker)
Mounting Options :Vertically: On Shelf; On Wall with optional included keyhole bracket for flush mounting
Packaging :Two to a carton
Weight | Metric :14 lbs | 6.4 kg
Warranty :5 Years

The Monitor 6 is a 2-way passive full range studio monitor
loudspeaker which incorporates a 6.5 inch cone low frequency
transducer and a 0.75 inch aluminium dome high frequency
transducer. The system?s low frequency driver is mounted
as a direct radiator in a bass-reflex cabinet constructed of
MDF wood, with solid Iroko side panels. The tuning port is
located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure.
The acoustically transparent cloth grille system is detachable.

FEATURES:
2-way near field studio monitor
6.5" low frequency speaker
.75" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
100 W power handling

SPECIFICATIONS:
RMS (Average) Power HandlingR:100 W
Program Power HandlingP: 200 W
Peak Power HandlingK: >400 W
Recommended Amplifier: 100 W to 200 W at 8 Ω
On-axis Frequency RangeF: 44 Hz - 40 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI: 7.2 Ω (at 174 Hz)
On-axis Sensitivity 1W / 1 mS: 85 dB SPL
Rated Peak SPL at Full Power: 111 dB
Nominal -6 dB BeamwidthsB:125° Horizontal
(average, 500 Hz to 8 kHz)   106° Vertical
Enclosure Material: MDF with Iroko wood
Color: Black/Iroko wood
Connectors: Binding posts
Dimensions (H x W x D): 34 x 23 x 27 cm (13.5 x 6.5 x 10.5 in)
Mounting: 2 x M6 points
Weight: 6.9 kg (15.2 lbs)
Shipping Weight: 8.1 kg (18.8 lbs)

This 2-way passive full range studio monitor loudspeaker which incorporates
an 8? low frequency transducer and a 0.75 inch aluminium dome high frequency
transducer. The system's low frequency driver is mounted as a direct radiator
in a bass-reflex cabinet constructed of MDF wood, with solid Iroko side panels.
The tuning port is located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure. The acoustically
transparent cloth grille system is detachable.

FEATURES:
2-way near/mid-field studio monitor
8" low frequency speaker
1" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
125 W power handling

SPECIFICATIONS:
RMS (Average) Power HandlingR:125 W
Program Power HandlingP:250 W
Peak Power HandlingK: >500 W
Recommended Amplifier:125 W to 250 W at 8 Ω
On-axis Frequency RangeF:38 Hz - 33 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI:3.2 Ω (at 15 kHz)
On-axis Sensitivity 1W / 1 mS: 89 dB SPL
Rated Peak SPL at Full Power: 116 dB
Nominal -6 dB BeamwidthsB:120° Horizontal
(average, 500 Hz to 8 kHz)    95° Vertical
Enclosure Material:MDF with Iroko wood side panels
Color:Black/Iroko wood
Connectors:Binding posts
Dimensions (H x W x D):42 x 28 x 29 cm(16.5 x 11 x 11.5 in)
Mounting:2 x M6 points
Weight: 12.8 kg (28 lbs)
Shipping Weight: 14 kg (31 lbs)