DYNAUDIOACOUSTICS M.15 PASSIVE MONITOR 300W

M 1.5 Near and midfield for post and film dubbing

The M1.5 is a fairly "punchy" monitor with an incredible bass
response mainly suited to popular music tracking and mixing,
voice and dialog recording, and as L, C, R monitors in high
performance surround monitoring systems.
Mounted either in the nearfield on top of a console or in midfield
just behindthe console on suitable stands, it can easily fulfill the
majority of monitoring needs. Flush mounting is also an option
when careful attention is paid to room design, construction and
acoustic treatment.

Specifications:
System 2-way Passive Near/Midfield Monitor
Frequency Response
(+/- 3 dB) 34 Hz - 20 kHz
Peak SPL 1m, pair
(IEC Short Term) > 127 dB peak
Peak SPL 2m, 5.1
(IEC Short Term) > 128.5 dB peak
Amplifier minimum 70 W (> 100 dB SPL @ 1,5m)
Sensitivity (2.83 V/1m) 88 dB
Impedance, Nominal 4 ohm
Impedance, HF (200 kHz) 6,2 ohm
Resonance Frequency 39 Hz
Internal Cabinet Volume 29 liters
Bass Principle Bass reflex
Crossover Frequencies 2000 Hz
Crossover Slope Woofer 18 dB/oct; Tweeter 12 dB/oct
Tweeter Esotec 28 mm soft dome Magnetic fluid, Rear chamber
Pure alu wire voice coil, 4 mm die-cast alu front
Woofer 15 cm, One-piece molded polypropylene cone,
75 mm pure alu wire voice coil
Weight 17,7 kg
Dimensions (WxHxL) 440 x 300 x 400 mm

This 2-way passive full range studio monitor loudspeaker which incorporates
an 8? low frequency transducer and a 0.75 inch aluminium dome high frequency
transducer. The system's low frequency driver is mounted as a direct radiator
in a bass-reflex cabinet constructed of MDF wood, with solid Iroko side panels.
The tuning port is located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure. The acoustically
transparent cloth grille system is detachable.

FEATURES:
2-way near/mid-field studio monitor
8" low frequency speaker
1" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
125 W power handling

SPECIFICATIONS:
RMS (Average) Power HandlingR:125 W
Program Power HandlingP:250 W
Peak Power HandlingK: >500 W
Recommended Amplifier:125 W to 250 W at 8 Ω
On-axis Frequency RangeF:38 Hz - 33 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI:3.2 Ω (at 15 kHz)
On-axis Sensitivity 1W / 1 mS: 89 dB SPL
Rated Peak SPL at Full Power: 116 dB
Nominal -6 dB BeamwidthsB:120° Horizontal
(average, 500 Hz to 8 kHz)    95° Vertical
Enclosure Material:MDF with Iroko wood side panels
Color:Black/Iroko wood
Connectors:Binding posts
Dimensions (H x W x D):42 x 28 x 29 cm(16.5 x 11 x 11.5 in)
Mounting:2 x M6 points
Weight: 12.8 kg (28 lbs)
Shipping Weight: 14 kg (31 lbs)

One 1" pure aluminum dome tweeter.
Two 5-1/4" BDSS cast basket drivers pressure coupled
to one 6“x12" low bass radiator.
Freq. Response: 30 Hz - 30 kHz.
Impedance: 8 Ohms.
Sensitivity: 92 dB.
Rec. Ampl. Power: 20 - 300 watts.
Inputs: Bi-amp/bi-wire 5 way binding post terminals.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim.
Dimensions: 41.2 x 20 x 38.4 cm.
Weight: 9.9 kg each.

ME 160

Enclosure Bass reflex type
Power Handling Capacity Continuous pinknoise: 150W
Rated Impedance 6 ohms
Sensitivity 88dB (1W, 1m)
Frequency Response  50 ? 20,000Hz  
Crossover Frequency  2,000Hz
Speaker Component 16cm resin-impregnated natural fiber cone woofer
(magnetically shielded) 2.5cm soft-dome type(magnetically shielded)
Input Terminals Screw terminals (compatible with a dual-banana plug),
gold plated
Finish Enclosure: MDF, black, paint Front grill: Cloth, black
Dimensions  216 (W) ? 376 (H) ? 244 (D) mm
Weight  7.5kg (per unit)
Mounting Brackets (option)  WCB-31, CMB-31     

The Monitor 6 is a 2-way passive full range studio monitor
loudspeaker which incorporates a 6.5 inch cone low frequency
transducer and a 0.75 inch aluminium dome high frequency
transducer. The system?s low frequency driver is mounted
as a direct radiator in a bass-reflex cabinet constructed of
MDF wood, with solid Iroko side panels. The tuning port is
located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure.
The acoustically transparent cloth grille system is detachable.

FEATURES:
2-way near field studio monitor
6.5" low frequency speaker
.75" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
100 W power handling

SPECIFICATIONS:
RMS (Average) Power HandlingR:100 W
Program Power HandlingP: 200 W
Peak Power HandlingK: >400 W
Recommended Amplifier: 100 W to 200 W at 8 Ω
On-axis Frequency RangeF: 44 Hz - 40 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI: 7.2 Ω (at 174 Hz)
On-axis Sensitivity 1W / 1 mS: 85 dB SPL
Rated Peak SPL at Full Power: 111 dB
Nominal -6 dB BeamwidthsB:125° Horizontal
(average, 500 Hz to 8 kHz)   106° Vertical
Enclosure Material: MDF with Iroko wood
Color: Black/Iroko wood
Connectors: Binding posts
Dimensions (H x W x D): 34 x 23 x 27 cm (13.5 x 6.5 x 10.5 in)
Mounting: 2 x M6 points
Weight: 6.9 kg (15.2 lbs)
Shipping Weight: 8.1 kg (18.8 lbs)

Info

The first in JBLʼs new 7 Series line, the 705i and 708i models answer the call for next generation multi-channel monitoring in post rooms, broadcast facilities and trucks. Leveraging patented technologies developed for our flagship M2 Master Reference Monitor, 7 Series deliver detailed imaging, extended frequency response and remarkable output from compact enclosures. Centrally amplified and tuned, and easily installed, 705i and 708i are the heart of an elegant, scalable system for broadcast and post facilities working in immersive audio formats.