DYNAUDIOACOUSTICS M2PASSIVE 3-WAY MONITOR 400W

M2 3 way midfield, with a wide range of applications

Stereo imaging is pinpoint accurate thanks to the computer optimised
designs of the crossover and drivers, and the M2 is capable of SPLs of
up to 125dB at 1.25m as a stand alone system. When combined with a
pair of Dynaudio Acoustics subwoofers, the system becomes a full 4 way
main monitoring system capable of very high SPLs with a full frequency
response down to below 35Hz.

Specifications:

System 3-way Passive Midfield/Main Monitor
Frequency Response
(+/- 3 dB) 34 Hz - 20 kHz
Peak SPL 1m, pair
(IEC Short Term) > 130 dB peak
Peak SPL 2m, 5.1
(IEC Short Term) > 131.5 dB peak
Amplifier minimum 100 W (> 100 dB SPL @ 2m)
Sensitivity (2.83 V/1m) 91 dB
Impedance, Nominal 4 ohm
Impedance, HF (200 kHz) 9,6 ohm
Resonance Frequency 45 Hz
Internal Cabinet Volume 70 liters
Bass Principle Bass reflex
Crossover Frequencies 900/4500 Hz
Crossover Slope Woofer 12 dB/oct; Midrange 12 dB/oct; Tweeter 18 dB/oct
Tweeter Esotec 28 mm soft dome Magnetic fluid, Rear chamber,
Pure alu wire voice coil, 4 mm die-cast alu front
Midrange 75 mm soft dome, pure alu wire voice coil
Woofer 21 cm, polypropylene cone, 54 mm pure alu wire voice coil
Weight 48 kg
Dimensions (WxHxL) 340 x 680 x 500 mm

Mini Monitor Speaker
Metal cone loudspeakers Power: 200 WRMS
Frequency response: 65Hz-22KHz
Sensitivity: 88db Height 30cm
Impact resistance: 8Ω
Color: Black

The Monitor 6 is a 2-way passive full range studio monitor
loudspeaker which incorporates a 6.5 inch cone low frequency
transducer and a 0.75 inch aluminium dome high frequency
transducer. The system?s low frequency driver is mounted
as a direct radiator in a bass-reflex cabinet constructed of
MDF wood, with solid Iroko side panels. The tuning port is
located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure.
The acoustically transparent cloth grille system is detachable.

FEATURES:
2-way near field studio monitor
6.5" low frequency speaker
.75" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
100 W power handling

SPECIFICATIONS:
RMS (Average) Power HandlingR:100 W
Program Power HandlingP: 200 W
Peak Power HandlingK: >400 W
Recommended Amplifier: 100 W to 200 W at 8 Ω
On-axis Frequency RangeF: 44 Hz - 40 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI: 7.2 Ω (at 174 Hz)
On-axis Sensitivity 1W / 1 mS: 85 dB SPL
Rated Peak SPL at Full Power: 111 dB
Nominal -6 dB BeamwidthsB:125° Horizontal
(average, 500 Hz to 8 kHz)   106° Vertical
Enclosure Material: MDF with Iroko wood
Color: Black/Iroko wood
Connectors: Binding posts
Dimensions (H x W x D): 34 x 23 x 27 cm (13.5 x 6.5 x 10.5 in)
Mounting: 2 x M6 points
Weight: 6.9 kg (15.2 lbs)
Shipping Weight: 8.1 kg (18.8 lbs)

ME 120

Enclosure Bass reflex type
Power Handling Capacity Continuous pinknoise: 50W
Rated Impedance 6 ohms
Sensitivity 88dB (1W, 1m)
Frequency Response 60 ? 18,000Hz
Crossover Frequency ?
Speaker Component 16cm cone-type (magnetically shielded)
Input Terminals Screw terminals (compatible with a dual-banana plug),
gold plated
Finish Enclosure: MDF, black, paint Front grill: Cloth, black
Dimensions 170 (W) ? 264 (H) ? 194 (D) mm
Weight 3.6kg (per unit)
Mounting Brackets (option) WCB-12, WCB-31, CMB-31 

One 1" pure aluminum dome tweeter.
Two 5-1/4" BDSS cast basket drivers pressure coupled
to one 6“x12" low bass radiator.
Freq. Response: 30 Hz - 30 kHz.
Impedance: 8 Ohms.
Sensitivity: 92 dB.
Rec. Ampl. Power: 20 - 300 watts.
Inputs: Bi-amp/bi-wire 5 way binding post terminals.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim.
Dimensions: 41.2 x 20 x 38.4 cm.
Weight: 9.9 kg each.

One 1" pure aluminum dome tweeter.
One 5-1/4" BDSS driver.
Freq. Response: 35 Hz - 30 kHz,
Impedance: 8 Ohms,
Sensitivity: 90 dB,
Rec. Ampl. Power: 20 - 150 watts,
Inputs: One pair of 5 way binding posts.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim
Dimensions: 29.7 x 17.2 x 29.6 cm,
Weight: 5.5 kg each