DYNAYDIOACOUSTICS BM 5P 50W

BM 5 Project studio monitor

The BM 5 is built upon a continuous development of
the BM series. This small passive monitor is a result
of the continuous research done in the Dynaudio Acoustics
laboratories. The redesign and fine-tuning of the BM 5
have been done with great care, and even the most
demanding ears will enjoy the clarity and presence of
this monitor.The 2-way passive system with a 175mm (6.9“) woofer
and a 28 mm (1.1“) soft dome tweeter, builds on classical
reference monitor technology. The BM 5 comes with a
frequency response of 50 Hz - 21 kHz.

Specifications:
System Two-way Passive Nearfield Monitor
Frequency Response (+/- 3 dB) 50 Hz - 21 kHz
Peak SPL 1m, pair (IEC Short Term) > 125 dB peak
Peak SPL 2m, 5.1 (IEC Short Term) > 126,5 dB peak
Max SPL 1m, (IEC Long Term) 103 dB RMS
Amplifier minimum 40 W (> 94 dB SPL @ 1m)
Sensitivity (2.83 V/1m) 86 dB
Impedance, Nominal 4 ohm
Impedance, HF (200 kHz) 5.8 ohm
Resonance Frequency 55 Hz
Internal Cabinet Volume 9.5 liters
Bass Principle Bass reflex
Crossover Frequencies 2700 Hz
Crossover Slope Woofer 6 dB/oct; Tweeter 12 dB/oct
Tweeter Esotec 28 mm/1.1? soft dome, Magnetic fluid,
Rear chamber, Pure alu wire voice coil, 4 mm alu front
Woofer 175 mm/6.9?, One-piece molded poly-prop cone,
75 mm/3? pure alu voice coil
Weight 7 kg / 15,4 lbs
Dimensions (W x H x D) 186 x 320 x 290 mm / 7,3? x 12.6? x 11?

The Monitor 6 is a 2-way passive full range studio monitor
loudspeaker which incorporates a 6.5 inch cone low frequency
transducer and a 0.75 inch aluminium dome high frequency
transducer. The system?s low frequency driver is mounted
as a direct radiator in a bass-reflex cabinet constructed of
MDF wood, with solid Iroko side panels. The tuning port is
located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure.
The acoustically transparent cloth grille system is detachable.

FEATURES:
2-way near field studio monitor
6.5" low frequency speaker
.75" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
100 W power handling

SPECIFICATIONS:
RMS (Average) Power HandlingR:100 W
Program Power HandlingP: 200 W
Peak Power HandlingK: >400 W
Recommended Amplifier: 100 W to 200 W at 8 Ω
On-axis Frequency RangeF: 44 Hz - 40 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI: 7.2 Ω (at 174 Hz)
On-axis Sensitivity 1W / 1 mS: 85 dB SPL
Rated Peak SPL at Full Power: 111 dB
Nominal -6 dB BeamwidthsB:125° Horizontal
(average, 500 Hz to 8 kHz)   106° Vertical
Enclosure Material: MDF with Iroko wood
Color: Black/Iroko wood
Connectors: Binding posts
Dimensions (H x W x D): 34 x 23 x 27 cm (13.5 x 6.5 x 10.5 in)
Mounting: 2 x M6 points
Weight: 6.9 kg (15.2 lbs)
Shipping Weight: 8.1 kg (18.8 lbs)

Info

The first in JBLʼs new 7 Series line, the 705i and 708i models answer the call for next generation multi-channel monitoring in post rooms, broadcast facilities and trucks. Leveraging patented technologies developed for our flagship M2 Master Reference Monitor, 7 Series deliver detailed imaging, extended frequency response and remarkable output from compact enclosures. Centrally amplified and tuned, and easily installed, 705i and 708i are the heart of an elegant, scalable system for broadcast and post facilities working in immersive audio formats.

One 1" pure aluminum dome tweeter.
Two 5-1/4" BDSS cast basket drivers pressure coupled
to one 6“x12" low bass radiator.
Freq. Response: 30 Hz - 30 kHz.
Impedance: 8 Ohms.
Sensitivity: 92 dB.
Rec. Ampl. Power: 20 - 300 watts.
Inputs: Bi-amp/bi-wire 5 way binding post terminals.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim.
Dimensions: 41.2 x 20 x 38.4 cm.
Weight: 9.9 kg each.

Dimensions | Metric :6-15/16” W x 9-11/16” D x 10-11/16” H | 17.6 x 24.6 x 27.1 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 5-1/2" high definition bass/midrange driver pressure coupled to one 8” bass radiator
Frequency Response :26 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :20 – 200 watts
A/V Receiver Crossover Setting :60 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Piano-Gloss Black
Included Accessories :Keyhole bracket (with 2 screws to mount to speaker)
Mounting Options :Vertically: On Shelf; On Wall with optional included keyhole bracket for flush mounting
Packaging :Two to a carton
Weight | Metric :14 lbs | 6.4 kg
Warranty :5 Years