Content |
A 2-way full range system (passive LF/HF crossover) in a vented dual purpose (main/stage monitor) enclosure. Includes a 12 in woofer and a 2 in exit/3 in voice coil compression driver on a Wave Guide Plate?. Applications The LA212 integrates with other LA Series loudspeakers to build an expandable total system. Includes rubber feet and a stand mount cup for use as a small main and rubber footpads for use as a stage monitor. Integrated handles and mounting/ suspension points are included.
FEATURES: Dual use main/monitor 2-way system 12 in LF/2 in exit HF on 90° conical Wave Guide Plate? Suspension points and pole mount cup Internal passive crossover/filter network For portable use or permanent installation General Application: Portable Stage Monitor Install
SPECIFICATIONS: Physical System Configuration 2-way, full range Product Group G LF Subsystem & Loading One 12 in woofer, vented HF Subsystem & Loading One 2 in exit/3 in voice coil compression driver on WGP? Operating Mode Passive only Enclosure Material Exterior grade Baltic birch plywood Finish Wear resistant textured black paint Connector Two Neutrik NL4 Speakon Suspension Hardware Six 3/8-16 mounting/suspension points Grille Powder coated perforated steel Companion Subbass LA118z, LA128z, or LA400 Dimensions (±0.13 in / ±3 mm) Height 24.00 / 610 Width 14.75 / 375 Depth 14.75 / 375 Minimum Stage Height 14.09 / 358 Floor Angle 45° Weights (pounds / kilograms) Net Weight 52.0 / 23.6 Shipping Weight 60.0 / 27.3 Performance: Frequency Response ±3 db 60 Hz to 18 kHz /-10 dB 50 Hz Recommended High-Pass Frequency 50 Hz, 24 dB / octave Axial Sensitivity (dB SPL, 1 watt @ 1 m) Full Range Passive 97 Nominal Input Impedance (ohms) Full Range Passive 8 Power Handling (watts, continuous) Full Range Passive 500 Calculated SPL Limit (referenced to 1 m) Full Range Passive Peak 130.0 Full Range Long Term 124.0 Nominal Dispersion (degrees @ - 6 dB) Conical 90° | Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 12 M
Description For a band, monitors play an important role too. The classic
Description monitor for vocals/guitar is a 12" monitor. The PREMIUM PR:O
Description 12 M monitor is designed without compromise exactly for this
Description application to provide the highest possible level of on-stage
Description performance.
Power handling capacity RMS: 400 W
Power handling capacity Program: 800 W
Frequency response within +/-3dB 70 Hz ? 19 kHz
Frequency response @ -10dB 63 Hz ? 19 kHz
Speaker 1x 12?
Impedance 8 Ohm
HF driver 1?
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 128 dB
Crossover frequency 2 kHz/12 db Octave
Connections 2x Speakon
Dimensions (WxHxD) 39 cm x 55,5 cm x 38 cm
Dimensions (WxHxD) 15 1/4? x 21 3/4? x 15?
Weight 16 kg
Weight 35.2 lbs |
Color Black Input Connections Parallel Neutrik® NL4 Speaker Type Fullrange Frequency Response (-3 dB) 70 - 20000 Hz Frequency Response (-10 dB) 55 - 20000 Hz Internal Crossover Yes Recommended High-Pass Frequency 60 Hz Sensitivity 1 W/1 m 99 dB Max. SPL/1m (calc) 132 dB Coverage (Nominal -6 dB) H° 90 ° Coverage (Nominal -6 dB) V° 50 ° Rotatable Horn No System Power Handling (Continuous/Program/Peak) 500 Watts LF Transducer SMX2121 HF Transducer DH3 Crossover Frequency 1600 Hz Nominal Impedance (Passive) 8 Ω Minimum Impedance 6.4 Ω Enclosure Material Plywood and MDF with EVCOAT Flying No Height 440 mm (17.32“) Width 364 mm (14.33“) Depth 573 mm (22.56“) Weight Net 19.8 kg (43.65 lbs) |
Description
The MON 15 A G3 is part of an entirely newly developed family of powered stage monitors for high performance. The MON G3 Series incorporates the advanced technology and premium materials found in high-end monitors typically rented by professionals, making this quality available to everyone. These include, for example, advanced coaxial loudspeakers with integrated 50° x 90° CD horn, which ensure the acoustic ideal of a true point source and thus outstanding audio characteristics even at short listening distances. Besides this, the series offers a high-level of robustness, a comprehensive set of features and the elegant LD Systems design.
A maximum sound pressure level of 129 dB and superior bass reproduction make the MON 15 A G3 the best choice for loud band stages, as a drum fill or for stand-alone use as a compact front PA without an additional subwoofer. For a 15" stage monitor, it is unusually compact and elegant, so despite its impressive performance data, it blends harmoniously into the stage set.
Both the signal (XLR/jack combo) and the power connection (PowerCON compatible) can be looped through. This allows for elegant, tidy cabling in multi-monitor set-ups or for distributed sound reinforcement.
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 129 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 15" woofer with 3" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front griller
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
122 dB (100 Hz - 12 kHz, fullspace @1m, 10% THD)
Max. SPL Peak (Sine burst)
129 dB (fullspace @1m, 10% THD)
Frequency response (-3 dB)
58 - 18000 HZ
Frequency response (-10 dB)
48 - 20000 Hz
Crossover frequency
1300 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
15 "
Woofer dimensions (mm)
381 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
75 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
|
Features : Compact and low-profile for minimal obstruction of audience sight-lines. 70°x 70° nominal coverage. Bi-amplified or full-range passive operation. Pole socket for applications requiring pole or tripod mounting. High power handling, low distortion Vented Gap Cooling™ LF driver. 3 in. (diaphragm) neodymium magnet compression driver. Rugged DuraFlex™ coated enclosures sized to be truck pack friendly. 14-Gauge steel grille lined with acoustically transparent cloth. Specifications : Frequency Range ( –10 dB) : 50 Hz-20 kHz Frequency Response (± 3 dB) : 75 Hz-20 kHz Coverage Pattern : 70˚ × 70˚ nominal Sensitivity (1W/1m) : 95 dB Power Rating (Cont. Pink Noise/Program/Peak) : 800 W / 1600 W / 3200 W (Continuous/Program/Peak) Rated Maximum SPL : 130 dB SPL Peak Nominal Impedance : 8Ω Input Connectors : Two NL4 Operational Modes : Full Range/Bi-Amp Dimensions (H x W x D) : 571 mm x 355 mm x 264 mm (22.5" x 13.4" x 10.4“) Net Weight : 19 kg ( 42 lbs) User's Manual
|
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 121 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 8" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
116 dB ( 100Hz - 12 kHz, fullspace @1m, 10% THD )
Max. SPL Peak (Sine burst)
121 dB ( fullspace @1m, 10% THD )
Frequency response (-3 dB)
68 Hz - 18000 Hz
Frequency response (-10 dB)
59 Hz - 20000 Hz
Crossover frequency
2500 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), 4 Application presets, Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
8 "
Woofer dimensions (mm)
203.2 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
|
Reviews
There are no reviews yet.