| Content |
A 2-way full range system (passive LF/HF crossover) in a vented dual purpose
(main/stage monitor) enclosure. Includes a 12 in woofer and a 2 in exit/3 in voice
coil compression driver on a Wave Guide Plate?.
Applications
The LA212 integrates with other LA Series loudspeakers to build an expandable
total system. Includes rubber feet and a stand mount cup for use as a small main
and rubber footpads for use as a stage monitor. Integrated handles and mounting/
suspension points are included.
FEATURES:
Dual use main/monitor 2-way system
12 in LF/2 in exit HF on 90° conical Wave Guide Plate?
Suspension points and pole mount cup
Internal passive crossover/filter network
For portable use or permanent installation
General Application:
Portable
Stage Monitor
Install
SPECIFICATIONS:
Physical
System Configuration 2-way, full range
Product Group G
LF Subsystem & Loading One 12 in woofer, vented
HF Subsystem & Loading One 2 in exit/3 in voice coil compression driver on WGP?
Operating Mode Passive only
Enclosure Material Exterior grade Baltic birch plywood
Finish Wear resistant textured black paint
Connector Two Neutrik NL4 Speakon
Suspension Hardware Six 3/8-16 mounting/suspension points
Grille Powder coated perforated steel
Companion Subbass LA118z, LA128z, or LA400
Dimensions (±0.13 in / ±3 mm)
Height 24.00 / 610
Width 14.75 / 375
Depth 14.75 / 375
Minimum Stage Height 14.09 / 358
Floor Angle 45°
Weights (pounds / kilograms)
Net Weight 52.0 / 23.6
Shipping Weight 60.0 / 27.3
Performance:
Frequency Response ±3 db 60 Hz to 18 kHz /-10 dB 50 Hz
Recommended High-Pass Frequency 50 Hz, 24 dB / octave
Axial Sensitivity (dB SPL, 1 watt @ 1 m)
Full Range Passive 97
Nominal Input Impedance (ohms)
Full Range Passive 8
Power Handling (watts, continuous)
Full Range Passive 500
Calculated SPL Limit (referenced to 1 m)
Full Range Passive Peak 130.0
Full Range Long Term 124.0
Nominal Dispersion (degrees @ - 6 dB)
Conical 90° |
Description:
Following in the tradition of the original 12MX, the 10MX offers most of the same features but in a more compact enclosure. Due to its unique cabinet geometry, the 10MX is at home either on the stage as an extremely low profile stage monitor, or as a main, medium duty, front of house speaker. Adamson's Acoustic Waveguide is employed in the 10MX and its integral pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. The 10MX carries on the tradition of multi-purpose versatility.
Applications:
Extremely Low Profile Stage Monitor
Arrayable Front of House Enclosure
Theater
Houses of worship
Corporate
Features:
Unique Cabinet Geometry
Adamson AX10 Low Frequency Driver
1" High Frequency Compression Driver
Passive Operation
Adamson Acoustic Waveguide
Durable Dual Component Finish
Roadworthy Construction
Weight: 22 |
JBL VRX915M 15'' 2-way 800W RMS Stage Monitor
Key Features :
Compact and low-profile for minimal obstruction of audience sightlines
50 x 90 nominal coverage
Bi-amplified or full-range passive operation
Differential Drive woofer with neodymium magnet for high power capacity and very light weight
4" (voice coil) diameter compression driver with neodymium magnet
Specifications:
|
Frequency Range
|
:
|
60 Hz - 20 kHz
| |
Frequency Response
|
:
|
70 Hz - 20 kHz
| |
Coverage Pattern
|
:
|
50 x 90 nominal
| |
Crossover Modes
|
:
|
Passive / Bi-amp
| |
Crossover Frequency
|
:
|
1.1 kHz
| |
Power Rating2 (Continuous / Program / Peak)
|
:
|
Passive Full-Range 800 W / 1600 W / 3200W, 2 hrs1 Passive Full-Range 600 W / 1200 W / 2400W, 100 hrs
| |
System Maximum SPL
|
:
|
127 dB SPL continuous (133 dB SPL peak)
| |
System Sensitivity (1w @ 1m
|
:
|
98 dB SPL
| |
LF Driver
|
:
|
1 x JBL 2265H 380 mm (15 in) Differential Drive?? woofer 8 Ohms
| |
HF Driver
|
|
1 x JBL 2452H, 100 mm (4.0 inch) diameter voice coil, 38 mm (1.5 inch) exit, neodymium magnet compression driver 8 Ohms
| |
Nominal Impedance
|
:
|
8 ohms
| |
Active Tunings
|
:
|
Tunings available at www.jblpro.com
| |
Enclosure
|
:
|
Symmetrical stage monitor, 15/18 mm, plywood
| |
Finish
|
:
|
Black DuraFlex finish
| |
Grille
|
:
|
Powder coated, black, 16 gauge perforated steel with acoustically transparent black screen backing
| |
Input Connectors
|
:
|
Neutrik Speakon NL-4 (x2), one on each end
| |
Dimensions (H x W x D)
|
:
|
629 mm x 432 mm x 324 mm (375 mm stage height) 24.75 in x 17 in x 12.75 in (14.75" stage height)
| |
Net Weight
|
:
|
21 kg (46.0 lb)
|
|
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 121 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 8" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
116 dB ( 100Hz - 12 kHz, fullspace @1m, 10% THD )
Max. SPL Peak (Sine burst)
121 dB ( fullspace @1m, 10% THD )
Frequency response (-3 dB)
68 Hz - 18000 Hz
Frequency response (-10 dB)
59 Hz - 20000 Hz
Crossover frequency
2500 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), 4 Application presets, Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
8 "
Woofer dimensions (mm)
203.2 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
|
Features :
Compact and low-profile for minimal obstruction of audience sight-lines.
70°x 70° nominal coverage.
Bi-amplified or full-range passive operation.
Pole socket for applications requiring pole or tripod mounting.
High power handling, low distortion Vented Gap Cooling™ LF driver.
3 in. (diaphragm) neodymium magnet compression driver.
Rugged DuraFlex™ coated enclosures sized to be truck pack friendly.
14-Gauge steel grille lined with acoustically transparent cloth.
Specifications :
Frequency Range ( –10 dB) : 50 Hz-20 kHz
Frequency Response (± 3 dB) : 75 Hz-20 kHz
Coverage Pattern : 70˚ × 70˚ nominal
Sensitivity (1W/1m) : 95 dB
Power Rating
(Cont. Pink Noise/Program/Peak) : 800 W / 1600 W / 3200 W
(Continuous/Program/Peak)
Rated Maximum SPL : 130 dB SPL Peak
Nominal Impedance : 8Ω
Input Connectors : Two NL4
Operational Modes : Full Range/Bi-Amp
Dimensions (H x W x D) : 571 mm x 355 mm x 264 mm
(22.5" x 13.4" x 10.4“)
Net Weight : 19 kg ( 42 lbs)
![acrobat_reader_logo.]( "acrobat_reader_logo.") User's Manual
| This 15" full-range loudspeaker stands out with impressive sound even at low frequencies. As a jack-of-all-trades, the unpowered ICOA 15 speaker by LD Systems and its design with a coaxial design and rotating, BEM-optimised CD horn means it is extremely flexible.
The horn-loaded woofer's outstanding bass reproduction makes the ICOA 15 the ideal choice for dance schools, musicians, bands and entertainers. It also allows DJs to play sets without the need for a subwoofer. The speaker also makes a good impression in fixed installations due to its freedom of flexibility.
Deployed vertically, the speaker impresses as a satellite; horizontally, it's excellent in suspended systems or as a floor monitor. It Delivers a maximum sound pressure level of 125 dB peak and has 1000 Watt peak performance.
Thanks to its shock-resistant front grille and ideal 55° tilt angle make the ICOA 15 outstanding as a floor monitor. Placed vertically, the 36 mm dual tilt stand attachment offers the choice of a 0° or 5° tilt angle for optimally adapting the system to the local acoustic environment. Extensive and smart accessories for installation and transport are optionally available. Four aluminium handles with an ergonomic rubber surface provide optimal grip when carrying the speaker.
| Product type |
PA loudspeaker |
| Type |
Passive |
| Low/mid driver dimensions |
15 " |
| Woofer size |
381 mm |
| Woofer magnet |
Ferrite |
| Woofer brand |
Custom-made |
| Horn |
BEM optimized CD Horn |
| HF driver dimensions |
1 " |
| HF driver size |
25.4 mm |
| HF driver magnet |
Ferrite |
| HF driver brand |
Custom-made |
| HF driver voice coil |
1.4 " |
| HF driver voice coil |
35 mm |
| Load rating (RMS) |
250 W |
| Dispersion (H x V) |
90° x 50° |
| Peak power |
1000 W |
| Frequency response |
48 - 20000 Hz |
| Crossover frequency |
2000 Hz |
| SPL (1W/1m) |
95 dB |
| Max. SPL |
125 dB |
| Impedance |
8 Ohm(s) |
| Loudspeaker inputs |
1 |
| Speaker input connections |
Speakon compatible |
| Loudspeaker outputs |
1 |
| Speaker output connections |
Speakon compatible |
| Cabinet material |
Polypropylene |
| Cabinet construction |
Bass Reflex |
| Mounting |
36mm flange (0°, 5°), 6 x M10 flying points |
| Monitor angle |
55 ° |
| Width |
416 mm |
| Height |
695 mm |
| Depth |
415 mm |
| Weight |
24,7 kg |
|
Reviews
There are no reviews yet.