Content |
* Bent bass horn subwoofer
* 12 in heavy duty woofer
* ±3 dB 45 - 150 Hz
* Peak output: 140 dB SPL
* For portable use or permanent installation
General Application
Sub
Portable
Install
Club
Size
Small/Medium
Description
The LA400 uses bass horn technology that was developed for the KF940 SuperSub?. It loads a powerful 12 inch woofer on an expanding bass horn that is eight feet in length, and provides extremely high output sub bass response in a compact, portable enclosure. The efficiency provided by EAW's advanced horn-loading techniques permits the LA400 to extend overall system frequency to the lowest octaves.
The LA400 is designed to be easily transportable. The "towel bar" handle across the mouth of the horn and cut-away lower rear corner allows users to roll the LA400 onto its rear-mounted casters with a minimum of effort. Mounting the casters on the enclosure's rear lowers the system's center of gravity during transport for easier rolling and more stable packing. A stout grille protects the drivers from objects that might fall into the horn when on its back.
Applications
The LA400 defies conventional wisdom, which states that an 18 inch woofer is required to drive a bass horn. 18 inch woofers simply do not have the rigidity required to drive the high acoustic impedance present in a horn throat. As a result, traditional 18 inch bass bins get loud, but only produce one note very well. The LA400 in contrast uses a proprietary heavy duty 12 inch woofer. The woofer has the motor structure of a traditional 18 inch device, and its cone is reinforced to be a better engine for compact horn-loading. This woofer is then loaded onto a properly designed bass horn which matches path length to cone area and maximizes driver efficiency. The result is tight, punchy sub bass response that not only will shake your foundation, but is articulate and musical as well.
The horns of multiple enclosures couple acoustically to create a single, larger horn that increases output and provides directivity to very low frequencies. Factory-recommended digital processor settings will enhance LF performance even more. The LA400 is engineered to work as a companion to LA Series full range systems, as well as other high-output compact loudspeaker systems. Laid on its side the LA400 is only 21 inches high, which also makes it very effective in clubs and theatres where subs must be intalled under a low stage.
Physical | System Configuration | | Subwoofer | Product Group | | G | SB Subsystem & Loading | | One 12 in woofer, horn-loaded | Enclosure Material | | Exterior grade Baltic birch plywood | Finish | | Wear resistant textured black paint | Connector | | Two Neutrik NL4 Speakon | Grille | | Powder coated perforated steel |
Dimensions (±0.13 in / ±3 mm) | | | Height | | 36.00 / 914 | Width | | 21.00 / 533 | Depth | | 36.00 / 914 |
Weights (pounds / kilograms) | | | Net Weight | | 125.0 / 56.8 | Shipping Weight | | 133.0 / 60.5 |
Performance | Frequency Response | | | ±3 db | | 45 Hz to 250 Hz | -10 dB | | 40 Hz | Recommended High-Pass Frequency | | 35 Hz, 12 dB / octave Butterworth |
Axial Sensitivity (dB SPL, 1 watt @ 1 m) | | | Subbass | | 107 |
Nominal Input Impedance (ohms) | | | Subbass | | 8 |
Power Handling (watts, continuous) | | | Subbass | | 500 |
Calculated SPL Limit (referenced to 1 m) | | | Subbass Peak | | 140.0 | Subbass Long Term | | 134.0 | |
- 1600 W (peak), 129 dB peak SPL utilizing high sensitivity transducer designed and engineered by EV for maximum punch.
- High-output EVS-12L woofer designed to exacting specifications for superior durability and exceptional low-frequency reproduction.
- System reliability verified with over 500 hours of abuse testing and endurance testing.
- Ideal for portable and installed applications. Lightweight, compact 15 mm wood enclosure with internal bracing with durable polyurea top-coat finish.
- Professional-grade hardware: integrated M20 threaded pole mount plate and two-handle design for easy lifting.
The ELX series is designed to deliver an unprecedented combination of sound quality, portability and durability at its price point. All-new custom components—tested to levels far exceeding the industry norm—make ELX200 a robust workhorse capable of handling real-world abuse and professional applications beyond the capability of competitors’ products in its category.
Every aspect of ELX200 is designed for ideal results as part of the whole - the acoustical, electrical and mechanical components all work together seamlessly. The subwoofers pack powerful low-frequency output into a surprisingly compact footprint, and feature tuned 15 mm thick wood enclosures with a premium top-coat finish. The proprietary features that have made the other members of the EV portable speaker family a go-to for best-in-class performance are also present.
EV\'s industry-leading quality and testing procedures yield efficient transducer design and meaningful specs, resulting in components that deliver accurate, linear response at the system’s highest output levels. Translation: loud and clear all the way up to the limit. Unified in one of the strongest full-range composite enclosures ever built by EV. The ELX200 is established as the new benchmark for toughness - both acoustically and physically; maximum efficiency with maximum toughness.
Weight Net 20.2kg (44.53 lbs) |
The S4022 is a compact, high-output band-pass subwoofer dedicated to permanent installations.
The system is equipped with two advanced 12” RCF precision woofers mounted in a clam-shell internal chamber.
The two transducers couple to achieve tight and maximised output. Each 12” features massive ceramic magnets and 3” copper voice coil.
The system is capable of producing a Max SPL of 131 dB and handles 800 Watts AES.
Features |
---|
Compact, arrayable, 2 x 12" bandpass subwoofer system | 131 dB max SPL, 800 Watt AES | Equipped with RCF high power 2 x12“, 3" voice coil woofers | Extensive internal bracing, 8 x M10 mounting points | Recessed handles | Baltic Birch cabinet finished in a very resistant, textured, polyurethane black paint | Epoxy powder coated front grille | Dedicated to permanent installation |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 40 Hz | ÷ 0.2 kHz | Max SPL @ 1m: | 131 dB | | System Sensitivity: | 97 dB | | Nominal Impedance: | 4 Ω | | Power Handling: | 800 Watt | | Peak Power Handling: | 2400 Watt | | Recommended Amplifier: | 1600 | |
TRANSDUCERS |
---|
Woofer: | 2 X 12" woofer, 3" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 400 Watts AES | | Sensitivity: | 97 dB | |
INPUT SECTION |
---|
Input connector: | 2 x Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 8 x m10 mounting points, 2 x recessed | | Handles: | 2 seitlich | | Grille: | Custom perforated steel grille | | Colour: | Black, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 500 / 19.68 mm/inch | | Width: | 650 / 25.59 mm/inch | | Depth: | 580 / 22.83 mm/inch | | Net Weight: | 38 / 83.77 Kg/Lbs |
| The S4012 high-efficiency band pass subwoofer is the ideal bass frequency extension to complement the RCFACUSTICA Compact series two-way loudspeakers for small size installations and distributed music systems.
The low-frequency transducer is an RCF Precision high-power 12” woofer with a 3” inside/outside voice coil to minimize power compression and extend the life of the product.
This new woofer design guarantees a fast and controlled reproduction of the bass frequency range. Using bandpass loading to the transducer, the subwoofer design ensures an efficient acoustic response down to 45 Hz.
The cabinet features two Neutrik Speakon™ connectors in a recessed input plate.
APPLICATIONS
- • Low Frequency Enhancement
- • Music Enhancement
- • Special Effects Reinforcement
- • Entertainment Systems
- • Live Music Reinforcement
- • Small Club Sound Systems
- • Infill Sub Bass Enhancement
General Specs
- 12" high-efficiency RCF Precision 3" voice-coil woofer with Inside/Outside Coil Technology
- Horn reflex loaded woofer
- 124 dB maximum sound pressure level
- Response down to 45 Hz
- Rectangular box enclosure with protective metal grille
- Baltic Birch cabinet with black, heavy duty, textured epoxy paint
- 35 mm standard pole mount in top section of cabinet
- Integrated hand carry points
Acoustical Specs
- Frequency Response -10 dB:45Hz ÷ 200 Hz
- Max SPL @ 1m:124dB
- System Sensitivity:92dB
- Nominal Impedance:8Ω
- Power Handling:400W
- Peak Power Handling:1600W
- Recommended Amplifier:800W
Cabinet Specs
- Cabinet Material:15 mm birch plywood construction
- Handles:2 on side
- Pole Mount/Cap:Yes
- Grille:Custom perforated steel grille
- Colour:Black, scratch resistant paint
Size/Weight
- Height:360 / 14.17 mm/inch
- Width:500 / 19.69 mm/inch
- Depth:400 / 15.75 mm/inch
- Net Weight:20 / 44 kg/lbs
|
FB-120W
Power Handling Capacity: Continuous pink noise ? 200W, continuous program ? 600W
Impedance: 8Ω
Sensitivity: 90dB (1W/m) free sound field, 96dB (1W/m) 1/2 free sound field
Frequency Response: 40Hz-1.2kHz (+/-10dB)
Dimensions: 16“?16“?17.75" (W?H?D)
Weight: 15kg |
The white Electro-Voice EVID-S12.1 is a 12” subwoofer designed to provide low-end reinforcement for system designers, installers, and audio engineers configuring systems for background and foreground music in stores, clubs, eateries, schools, and more. Its acoustic ports and 12” dual voice-coil, high-excursion woofer yield a frequency response of 40 to 140 Hz and a 127 dB maximum SPL.
Inputs and outputs utilize spring-loaded speaker terminals. The subwoofer can accept a stereo input and drive up to four satellite speakers (available separately). It includes hardware for mounting to a wall or corner and has an eyebolt for the attachment of a safety line.
12" dual voice-coil, high-excursion woofer and acoustic ports yield a frequency response of 40 to 140 Hz800W peak (200W continuous) power handling for 127 dB maximum SPL (133 dB peak)Spring-loaded speaker terminals for inputs and outputsSimultaneously drive up to four satellite speakers (available separately)Logo can be replaced to match speaker orientationIncludes hardware for mounting subwoofer to a wall or corner
LF Driver |
1 x 12" / 305 mm |
Input |
Spring-loaded speaker terminals |
Output |
Spring-loaded speaker terminals |
Frequency Response |
40 to 140 Hz (-10 dB) |
Sensitivity |
104 dB (eighth space on corner averaged 60 to 100 Hz, 1 W) |
Maximum SPL |
127 dB calculated, 133 dB peak |
Power Handling |
800 W peak (200 W with continuous pink noise for 100 hours) |
Low Impedance |
Yes |
Nominal Impedance |
8 Ohms |
Dimensions (H x W x D) |
16.3 x 23.0 x 11.9" / 413 x 584 x 303 mm |
Weight |
39.2 lb / 17.8 kg |
|
Reviews
There are no reviews yet.