Content |
* Bent bass horn subwoofer
* 12 in heavy duty woofer
* ±3 dB 45 - 150 Hz
* Peak output: 140 dB SPL
* For portable use or permanent installation
General Application
Sub
Portable
Install
Club
Size
Small/Medium
Description
The LA400 uses bass horn technology that was developed for the KF940 SuperSub?. It loads a powerful 12 inch woofer on an expanding bass horn that is eight feet in length, and provides extremely high output sub bass response in a compact, portable enclosure. The efficiency provided by EAW's advanced horn-loading techniques permits the LA400 to extend overall system frequency to the lowest octaves.
The LA400 is designed to be easily transportable. The "towel bar" handle across the mouth of the horn and cut-away lower rear corner allows users to roll the LA400 onto its rear-mounted casters with a minimum of effort. Mounting the casters on the enclosure's rear lowers the system's center of gravity during transport for easier rolling and more stable packing. A stout grille protects the drivers from objects that might fall into the horn when on its back.
Applications
The LA400 defies conventional wisdom, which states that an 18 inch woofer is required to drive a bass horn. 18 inch woofers simply do not have the rigidity required to drive the high acoustic impedance present in a horn throat. As a result, traditional 18 inch bass bins get loud, but only produce one note very well. The LA400 in contrast uses a proprietary heavy duty 12 inch woofer. The woofer has the motor structure of a traditional 18 inch device, and its cone is reinforced to be a better engine for compact horn-loading. This woofer is then loaded onto a properly designed bass horn which matches path length to cone area and maximizes driver efficiency. The result is tight, punchy sub bass response that not only will shake your foundation, but is articulate and musical as well.
The horns of multiple enclosures couple acoustically to create a single, larger horn that increases output and provides directivity to very low frequencies. Factory-recommended digital processor settings will enhance LF performance even more. The LA400 is engineered to work as a companion to LA Series full range systems, as well as other high-output compact loudspeaker systems. Laid on its side the LA400 is only 21 inches high, which also makes it very effective in clubs and theatres where subs must be intalled under a low stage.
Physical | System Configuration | | Subwoofer | Product Group | | G | SB Subsystem & Loading | | One 12 in woofer, horn-loaded | Enclosure Material | | Exterior grade Baltic birch plywood | Finish | | Wear resistant textured black paint | Connector | | Two Neutrik NL4 Speakon | Grille | | Powder coated perforated steel |
Dimensions (±0.13 in / ±3 mm) | | | Height | | 36.00 / 914 | Width | | 21.00 / 533 | Depth | | 36.00 / 914 |
Weights (pounds / kilograms) | | | Net Weight | | 125.0 / 56.8 | Shipping Weight | | 133.0 / 60.5 |
Performance | Frequency Response | | | ±3 db | | 45 Hz to 250 Hz | -10 dB | | 40 Hz | Recommended High-Pass Frequency | | 35 Hz, 12 dB / octave Butterworth |
Axial Sensitivity (dB SPL, 1 watt @ 1 m) | | | Subbass | | 107 |
Nominal Input Impedance (ohms) | | | Subbass | | 8 |
Power Handling (watts, continuous) | | | Subbass | | 500 |
Calculated SPL Limit (referenced to 1 m) | | | Subbass Peak | | 140.0 | Subbass Long Term | | 134.0 | | Features
- Compact subwoofer system for installations
– 12″ double coil loudspeaker
– Right/Left inputs
– Filtered right/left outputs
– Wall mount accessory
The Arco 12 Sub incorporates the new 122S dual coil 12” loudspeaker for bass reproduction which provides low frequency output to 30 Hz. The dual voice coil configuration of the loudspeaker allows the cabinet to reproduce both the left and right channel subwoofer frequencies.
The Arco 12 Sub cabinet uses a band-pass configuration. The enclosure is manufactured in MDF and is available in a black paint finish. An optional mounting accessory permits wall mounting. The connector panel provides stereo inputs and high-pass filtered satellite outputs for either Arco 4 or Arco 24 systems.
The Arco 12 Sub is ideal for foreground music and music/paging systems requiring bass reinforcement. Possible applications include restaurants, retail outlets, bars, music cafes, fitness centers, or any other indoor application.
Technical Data
Power Handling |
170 W Cont. Program/Coil |
Frequency Range (-10 dB) |
30 Hz-180 Hz |
Nominal Impedance |
8 + 8 ohms |
Sensitivity 1 W/1 m |
106 dB SPL |
Rated Peak SPL at 1 m |
134 dB |
Internal Crossover |
In: 12dB/oct low pass 180 Hz
Out: 6 dB/oct high-pass |
Connectors |
Sping-Loaded Terminals |
Enclosure Material |
MDF |
Color/Finish |
Black Paint |
Dimensions (H x W x D) |
36 x 59.2 x 28.5 cm
14.2 x 23.3 x 11.2 in |
Weight |
14 kg (30.8 lb) |
|
FB-120W
Power Handling Capacity: Continuous pink noise ? 200W, continuous program ? 600W
Impedance: 8Ω
Sensitivity: 90dB (1W/m) free sound field, 96dB (1W/m) 1/2 free sound field
Frequency Response: 40Hz-1.2kHz (+/-10dB)
Dimensions: 16“?16“?17.75" (W?H?D)
Weight: 15kg |
EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01")
|
The S4022 is a compact, high-output band-pass subwoofer dedicated to permanent installations.
The system is equipped with two advanced 12” RCF precision woofers mounted in a clam-shell internal chamber.
The two transducers couple to achieve tight and maximised output. Each 12” features massive ceramic magnets and 3” copper voice coil.
The system is capable of producing a Max SPL of 131 dB and handles 800 Watts AES.
Features |
---|
Compact, arrayable, 2 x 12" bandpass subwoofer system | 131 dB max SPL, 800 Watt AES | Equipped with RCF high power 2 x12“, 3" voice coil woofers | Extensive internal bracing, 8 x M10 mounting points | Recessed handles | Baltic Birch cabinet finished in a very resistant, textured, polyurethane black paint | Epoxy powder coated front grille | Dedicated to permanent installation |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 40 Hz | ÷ 0.2 kHz | Max SPL @ 1m: | 131 dB | | System Sensitivity: | 97 dB | | Nominal Impedance: | 4 Ω | | Power Handling: | 800 Watt | | Peak Power Handling: | 2400 Watt | | Recommended Amplifier: | 1600 | |
TRANSDUCERS |
---|
Woofer: | 2 X 12" woofer, 3" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 400 Watts AES | | Sensitivity: | 97 dB | |
INPUT SECTION |
---|
Input connector: | 2 x Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 8 x m10 mounting points, 2 x recessed | | Handles: | 2 seitlich | | Grille: | Custom perforated steel grille | | Colour: | Black, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 500 / 19.68 mm/inch | | Width: | 650 / 25.59 mm/inch | | Depth: | 580 / 22.83 mm/inch | | Net Weight: | 38 / 83.77 Kg/Lbs |
|
Passive subwoofer 12“, 400W rms, frequency response 42 - 200Hz, max SPL 127dB, 2 x balanced speakon. 19,8kg, black color.
- 15-mm plywood enclosure, internally braced, with textured paint
- EVS-12S 12" woofer for powerful, engaging bass response
- Pole mount for full-range systems
Input Connections | NL4 style (2) | Nominal Impedance | 8 Ω | Frequency Response (-3 dB) | 53 - 125 Hz | Frequency Response (-10 dB) | 42 - 200 Hz | Sensitivity 1 W/1 m | 94 dB | Max. SPL/1m (calc) | 127 dB | System Power Handling (Continuous/Program/Peak) | 400 / 800 / 1600 Watts | LF Transducer | EVS-12S, 305 mm( 12“) Woofer | Enclosure Material | 9-ply 15 mm plywood, internally braced with textured paint | Grill | 16 GA steel with black powder coat | Height | 400 mm (15.75“) | Width | 444.5 mm (17.5“) | Depth | 457.2 mm (18“) | Shipping Weight | 25.4 kg (56 lbs) |
|
Reviews
There are no reviews yet.