EAW SB 150R – 1000w subwoofer

Discontinued

1,355.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Portable version Compact subwoofer system 15 in woofer, optimally vented  General Application  Sub Portable SizeSmall/Medium DescriptionA dedicated subwoofer system with a 15 in transducer in a vented rectangular enclosure. Available in a portable version (‘R’ with handles and NL4 connectors) or a permanent installation version (‘P’ with barrier strip input and mounting/suspension points). ApplicationsThe SB150 […]

 

Read more

  • Portable version
  • Compact subwoofer system
  • 15 in woofer, optimally vented

 General Application 

Sub
Portable
Size
Small/Medium
Description
A dedicated subwoofer system with a 15 in transducer in a vented rectangular enclosure. Available in a portable version (‘R’ with handles and NL4 connectors) or a permanent installation version (‘P’ with barrier strip input and mounting/suspension points).
Applications
The SB150 provides high output sub bass response in a compact enclosure. Tuned enclosure venting extends LF response and minimizes driver strain. MX Series processors extend LF response and safeguard against cone excursion damage. Six year warranty.
Physical
System Configuration   Subwoofer
Product Group   G, J
LF Subsystem & Loading   15 in, Vented
Enclosure Material   Exterior grade Baltic birch plywood
Finish   Wear resistant textured black paint
Connector   Two Neutrik NL4 Speakon
Grille   Powder coated perforated steel
Dimensions (±0.13 in / ±3 mm)    
Height   24.62 / 625
Width   19.69 / 500
Depth   19.00 / 483
Weights (pounds / kilograms)    
Net Weight   76.0 / 34.5
Shipping Weight   85.0 / 38.6
Performance
Frequency Response    
±3 db   33Hz to 300Hz (43Hz w/out CCEP)
-10 dB   29Hz (32Hz w/out CCEP)
Recommended High-Pass Frequency   25
Axial Sensitivity (dB SPL, 1 watt @ 1 m)    
Subbass   95
Nominal Input Impedance (ohms)    
Subbass   8
Power Handling (watts, continuous)    
Subbass   1000
Calculated SPL Limit (referenced to 1 m)    
Subbass Peak   131.0
Subbass Long Term   125.0
Weight 38.60 kg

Reviews

There are no reviews yet.

Be the first to review “EAW SB 150R – 1000w subwoofer”

Your email address will not be published. Required fields are marked *

Quick Comparison

EAW SB 150R - 1000w subwoofer removeJBL AL 7115-WRX PASSIVE SUB LOUDSPEAKER 1x15' 2000W removeELECTRO VOICE Rx215S 2x15" Subwoofer 800W removeJBL AL 7115 PASSIVE SUB LOUDSPEAKER 1x15' 2000W removeJBL AL 7115-WRC PASSIVE SUB LOUDSPEAKER 1x15' 2000W removeLD SYSTEMS LDESUB15G3 Stinger 15" Subwoofer Passive 600W RMS remove
NameEAW SB 150R - 1000w subwoofer removeJBL AL 7115-WRX PASSIVE SUB LOUDSPEAKER 1x15' 2000W removeELECTRO VOICE Rx215S 2x15" Subwoofer 800W removeJBL AL 7115 PASSIVE SUB LOUDSPEAKER 1x15' 2000W removeJBL AL 7115-WRC PASSIVE SUB LOUDSPEAKER 1x15' 2000W removeLD SYSTEMS LDESUB15G3 Stinger 15" Subwoofer Passive 600W RMS remove
Image
SKUSB150RAL 7115-WRX001878AL 7115AL 7115-WRCLDESUB15G3
Rating
Price 1,355.00 incl. GR VAT 4,642.98 incl. GR VAT1,964.56 incl. GR VAT 2,293.00 incl. GR VAT 3,600.01 incl. GR VAT 519.55 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Passive 15" bass-reflex PA subwoofer
  • 600 watts RMS
  • 127 dB maximum sound pressure level
  • Deep bass down to 40 Hz through 15" custom design Woofer
  • Speaker In, Satellite Out, Sub Thru sockets
  • Can be used horizontally or vertically
  • 18 mm plywood cabinet with extremely durable polyurea coating
  • Easy handling through ergonomic handles and stacking dimples
  • Shock-resistant front grille to protect the loudspeaker.
  • Insert for M20 threaded poles
  • Clever transport accessories
Content
  • Portable version
  • Compact subwoofer system
  • 15 in woofer, optimally vented

 General Application 

Sub
Portable

Size
Small/Medium

Description
A dedicated subwoofer system with a 15 in transducer in a vented rectangular enclosure. Available in a portable version ('R' with handles and NL4 connectors) or a permanent installation version ('P' with barrier strip input and mounting/suspension points).

Applications
The SB150 provides high output sub bass response in a compact enclosure. Tuned enclosure venting extends LF response and minimizes driver strain. MX Series processors extend LF response and safeguard against cone excursion damage. Six year warranty.
Physical
System Configuration   Subwoofer
Product Group   G, J
LF Subsystem & Loading   15 in, Vented
Enclosure Material   Exterior grade Baltic birch plywood
Finish   Wear resistant textured black paint
Connector   Two Neutrik NL4 Speakon
Grille   Powder coated perforated steel

Dimensions (±0.13 in / ±3 mm)
   
Height   24.62 / 625
Width   19.69 / 500
Depth   19.00 / 483

Weights (pounds / kilograms)
   
Net Weight   76.0 / 34.5
Shipping Weight   85.0 / 38.6

Performance
Frequency Response    
±3 db   33Hz to 300Hz (43Hz w/out CCEP)
-10 dB   29Hz (32Hz w/out CCEP)
Recommended High-Pass Frequency   25

Axial Sensitivity (dB SPL, 1 watt @ 1 m)
   
Subbass   95

Nominal Input Impedance (ohms)
   
Subbass   8

Power Handling (watts, continuous)
   
Subbass   1000

Calculated SPL Limit (referenced to 1 m)
   
Subbass Peak   131.0
Subbass Long Term   125.0

Ειδική έκδοση του AM 7115 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
υλικών προστασίας. Πιστοποίηση IP56 κατά
πρότυπο IEC 529. Παράδοση κατόπιν
παραγγελίας.

Frequency Range (-10 dB):     40 Hz – 4.2 kHz
Frequency Response (±3 dB):     47 Hz - 3.0 kHz
Transducer Power Rating (AES):     1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating (IEC):     600 W (2400 W peak), 100 hrs
Maximum SPL:     50 Hz –125 Hz
125 Hz – 800 Hz:     126 dB-SPL cont avg
(dB-SPL, 1W @ 1m):     50 Hz – 125 Hz
125 Hz – 800 Hz:     97 dB
Nominal Impedance:     8 ohms
Low Frequency Driver:     1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
Enclosure:     Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment:     13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish:     Black DuraFlex™ finish.
Grille:     Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector:     NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications:     Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D in vertical cabinet orientation):     548 x 561 x 657 mm
Net Weight:     25.9 kg (57 lb)
Optional Accessories:     M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.

2x15''
 800W/3200W Peak
 133dB SPL max
 4 Ohm
 40Hz-125/250Hz
 schwarz

Frequency Range (-10 dB):     40 Hz – 4.2 kHz
Frequency Response (±3 dB):     47 Hz - 3.0 kHz
Transducer Power Rating (AES):     1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating (IEC):     600 W (2400 W peak), 100 hrs
Maximum SPL:     50 Hz –125 Hz
125 Hz – 800 Hz:     126 dB-SPL cont avg
(dB-SPL, 1W @ 1m):     50 Hz – 125 Hz
125 Hz – 800 Hz:     97 dB
Nominal Impedance:     8 ohms
Low Frequency Driver:     1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
Enclosure:     Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment:     13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish:     Black DuraFlex™ finish.
Grille:     Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector:     NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications:     Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D in vertical cabinet orientation):     548 x 561 x 657 mm
Net Weight:     25.9 kg (57 lb)
Optional Accessories:     M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.

Ειδική έκδοση του AM 7115 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
υλικών προστασίας. Πιστοποίηση IP55 κατά
πρότυπο IEC 529. Παράδοση κατόπιν
παραγγελίας.

Frequency Range (-10 dB):     40 Hz – 4.2 kHz
Frequency Response (±3 dB):     47 Hz - 3.0 kHz
Transducer Power Rating (AES):     1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating (IEC):     600 W (2400 W peak), 100 hrs
Maximum SPL:     50 Hz –125 Hz
125 Hz – 800 Hz:     126 dB-SPL cont avg
(dB-SPL, 1W @ 1m):     50 Hz – 125 Hz
125 Hz – 800 Hz:     97 dB
Nominal Impedance:     8 ohms
Low Frequency Driver:     1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
Enclosure:     Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment:     13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish:     Black DuraFlex™ finish.
Grille:     Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector:     NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications:     Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D in vertical cabinet orientation):     548 x 561 x 657 mm
Net Weight:     25.9 kg (57 lb)
Optional Accessories:     M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.

 LD Systems STINGER SUB 15 G3 Passive 15” Bass Reflex PA Speaker This highly professional passive subwoofer is designed for absolute, long-term reliability. The Stinger® SUB 15 G3 provides 600 watts of continuous power; the maximum sound pressure level is 126 dB. Its specially developed 15" woofer also emits the deepest bass sounds with extremely powerful and clear contours. Designed as a real all-round workhorse, the strongly supported bass reflex cabinet is designed for horizontal and vertical use. It is made from robust 18 mm birch plywood and offers exceptional stability and durability thanks to its extremely durable polyurea coating. The features include a steel grille, a thread insert for M20-extension tubes, stacking dimples and ergonomic handles. The Stinger® SUB 15 A G3 is an affordable solution for professional PA applications; extensive accessories support use on stage and in fixed installations.
Product type
PA subwoofer

Type
passive

Low/mid driver dimensions
15 "

Woofer size
381 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

Woofer voice coil
3 "

Woofer voice coil (mm)
76.5 mm

Load rating (RMS)
600 W

Peak power
1200 W

Frequency response
40 - Crossover Hz

SPL (1W/1m)
99 dB

Max. SPL
127 dB

Impedance
8 Ohm(s)

Loudspeaker inputs
1

Speaker input connections
Speakon compatible

Loudspeaker outputs
1

Speaker output connections
Speakon compatible

Speakers per amplifier channel (DSP44/45K)
3

Cabinet material
18 mm Plywood

Cabinet surface
Polyurea

Cabinet construction
Bass Reflex

Width
567 mm

Height
477 mm

Depth
624 mm

Weight
29,7 kg
Weight38.60 kg25.90 kg48.50 kg25.90 kg25.90 kg30.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 38.60 kg
Weight 25.90 kg
Weight 48.50 kg
Weight 25.90 kg
Weight 25.90 kg
Weight 30.00 kg