| Content |
- For small cinemas
- (1)18 in woofer
- Vented enclosure maximizes output
General Application
Description
The SB184C cinema subwoofer loudspeaker system uses a high power 18-in cone transducer mounted in an optimally vented enclosure to fill small to medium capacity theaters with high definition sub bass information at earth-shaking output levels.
The SB184C?s optimally vented enclosure uses enclosure resonance to increase sub bass response while limiting driver excursion. This method produces less distortion and minimizes driver strain while extending sub bass response to the lower limits of human hearing. Special effects will have greater clarity, greater power and greater impact.
A two-terminal barrier strip, which accomodates bare wire, tinned leads or spade lugs, is located on the side of the enclosure for convenient access in cramped installation areas. An additional two-terminal barrier strip is provided to link multiple subwoofers. The use of multiple SB184C?s provides even greater output capability and further extends low frequency response. All external components feature a ?dead? flat black finish to eliminate the reflection of light through perforated cinema screens.
|
Applications
Small Cinemas |
|
Physical |
| System Configuration |
|
Dedicated Subwoofer |
| SB Subsystem & Loading |
|
1x 18-in vented |
| Enclosure Material |
|
3/4-in MDF; 15mm birch baffle |
| Finish |
|
Wear resistant textured black paint |
| Connector |
|
2-terminal barrier strip |
| Grille |
|
Vinyl coated perforated steel |
Dimensions (±0.13 in / ±3 mm) |
|
|
| Height |
|
39.50 / 1003 |
| Width |
|
24.50 / 622 |
| Depth |
|
21.00 / 533 |
Weights (pounds / kilograms) |
|
|
| Net Weight |
|
95.0 / 43.2 |
| Shipping Weight |
|
105.0 / 47.7 |
Performance |
| Frequency Response |
|
|
| ±3 db |
|
34 Hz - 500Hz |
| Recommended High-Pass Frequency |
|
20 |
Axial Sensitivity (dB SPL, 1 watt @ 1 m) |
|
|
| Subbass |
|
96 |
Nominal Input Impedance (ohms) |
|
|
| Subbass |
|
8 |
Power Handling (watts, continuous) |
|
|
| Subbass |
|
800 |
Calculated SPL Limit (referenced to 1 m) |
|
|
| Subbass Peak |
|
128 |
| Subbass Long Term |
|
125 | |
The S8018 II high-efficiency subwoofer is the ideal low-frequency extension to complement RCF installed systems.
The low-frequency transducer is a hypervented vented, high excursion RCF Precision 18” woofer with a 4” inside/outside voice coil to minimize power compression and extend the life of the product.
Using bass-reflex loading the subwoofer design ensures an efficient acoustic response down to 30 Hz. The Baltic birch plywood enclosure is painted with black, heavy duty, textured epoxy. The front is protected by a strong powder coated metal grille. The cabinet features two Neutrik Speakon™ connectors in a recessed input plate. A M20 pole mount adaptor is provided on the top of the cabinet, integrated hand carry points on the cabinet sides.
Features
- 18" high-efficiency 4" voice-coil woofer with Inside/Outside Coil Technology
- 137 dB maximum sound pressure level
- Response down to 30 Hz
- Rectangular box enclosure with protective metal grille
- 35 mm standard pole mount in top section of cabinet
- Baltic Birch cabinet painted with black, heavy duty, textured epoxy
- Integrated hand carry points
Acoustical Specifications
- Frequency Response -10 dB: 30 Hz ÷ 200 Hz
- Max SPL @ 1m: 137 dB
- System Sensitivity: 100 dB
- Nominal Impedance: 8 Ω
- Power Handling: 1500 W
- Peak Power Handling: 6000 W
- Recommended Amplifier: 3000 W
Transducers
- Woofer: 18" woofer, 4" voice coil
- Nominal Impedance: 8 Ω
- Input Power Rating: 1500 W AES
- Sensitivity: 100 dB
Input Section
- Input connector: Speakon NL4
Cabinet
- Cabinet Material: 15 mm birch plywood construction
- Handles: 2 on side
- Grille: Custom perforated steel grille
- Colour: Black, scratch resistant paint
Physical Specifications
- Height: 630 / 24.80 mm/inch
- Width: 530 / 20.87 mm/inch
- Depth: 770 / 30.31 mm/inch
- Net Weight: 43 / 94.60 kg/lbs
|
The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection. Connections are dual Neutrik Speakon and 1/4" jacks. With professional features, excellent sonic performance, and great value, Yamaha Club Concert Series loudspeakers deliver premium quality night after night.
The CW118V enclosure houses a powerful cast-frame 18" woofer with a frequency response of 30Hz - 2kHz. 600W program handling, 1,200W peak. Sensitivity: 96dB. 22“W x 32“H x 25“D. 71 lbs.
Yamaha CW118V 18" Club Concert Series Subwoofer Speaker Features:
- Tough, paintable exterior coating
- Cast-frame 18" woofer
- Frequency response of 30Hz-2kHz (-10dB)
- 600W program handling/1,200W peak
- Sensitivity: 96dB
- 22“W x 32“H x 25“D
|
Chassis Size 457.2 mm (18“)
Color Black
Input Connections 2 Neutrik® NL8
Speaker Type Line Arrays
Speaker Type Subs
Frequency Response (-3 dB) 33 - 400 Hz
Frequency Response (-10 dB) 35 - 500 Hz
Recommended High-Pass Frequency 33 Hz
Sensitivity 1 W/1 m 103 dB
Max. SPL/1m (calc) 140 dB
Coverage
(Nominal -6 dB) H° 200 °
Coverage
(Nominal -6 dB) V° 325 °
System Power Handling (Continuous/Program/Peak) 1200 Watts
LF Transducer EVX180B
LF Nominal Impedance 4 Ω
Flying Yes
Outdoor No
Height 494.3 mm (19.46“)
Width 1245 mm (49.02“)
Depth 740 mm (29.13“)
Weight Net 92 kg (202.83 lbs)
|
Horn loaded SUBWOOFER με 1 x 18 2242H SVG driver. 800W/8Ω. 22Hz-250Hz ±3dB. (2 SUBs min., 4 SUBs optimum) με επιδαπέδια τοποθέτηση, δεν αναρτάται, κπ. (564H x 1530W x 1288D mm). 159,3kg. |
The vented SUB 18 and SUB 28 direct radiators have been designed for subwoofer use in active multiway systems. The superior transient response of the classic bass reflex construction is also well suited for medium to large bass arrays. The premium 700W RMS long excursion woofers feature extremely low THD, and the reliable, all-electronic Voice Coil Tracking Protection prevents thermal overload of the 100mm sandwich voice coils. For maximum dynamics, the SUB models can be driven by extremely powerful amplifiers; thermal overload triggers a virtually inaudible 'soft' power reduction.
Order-# D113129 Cabinet Subwoofer Configuration Vented Direct Radiator Nominal Impedance 8 ohms Rated Power RMS 700 watts Program Power 1400 watts Peak Power 2800 watts SPL 2,83 V/1m 98 dB max. SPL 1m (calc. with Peak) 132 dB Freq. Range (-10 dB) 35Hz - 700Hz Passive X-Over Frequency Hi-Cut VCT Protections yes Components LOW LFS 18700 Order-# D366304 Connectors SPEAKON 2x NL 4MPR 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF --- Pin Wiring Biamped LF --- Dimensons (WxHxD) mm 505x 805x 570 Net Weight 49 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel
|
Reviews
There are no reviews yet.