| Content |
- For small cinemas
- (1)18 in woofer
- Vented enclosure maximizes output
General Application
Description
The SB184C cinema subwoofer loudspeaker system uses a high power 18-in cone transducer mounted in an optimally vented enclosure to fill small to medium capacity theaters with high definition sub bass information at earth-shaking output levels.
The SB184C?s optimally vented enclosure uses enclosure resonance to increase sub bass response while limiting driver excursion. This method produces less distortion and minimizes driver strain while extending sub bass response to the lower limits of human hearing. Special effects will have greater clarity, greater power and greater impact.
A two-terminal barrier strip, which accomodates bare wire, tinned leads or spade lugs, is located on the side of the enclosure for convenient access in cramped installation areas. An additional two-terminal barrier strip is provided to link multiple subwoofers. The use of multiple SB184C?s provides even greater output capability and further extends low frequency response. All external components feature a ?dead? flat black finish to eliminate the reflection of light through perforated cinema screens.
|
Applications
Small Cinemas |
|
Physical |
| System Configuration |
|
Dedicated Subwoofer |
| SB Subsystem & Loading |
|
1x 18-in vented |
| Enclosure Material |
|
3/4-in MDF; 15mm birch baffle |
| Finish |
|
Wear resistant textured black paint |
| Connector |
|
2-terminal barrier strip |
| Grille |
|
Vinyl coated perforated steel |
Dimensions (±0.13 in / ±3 mm) |
|
|
| Height |
|
39.50 / 1003 |
| Width |
|
24.50 / 622 |
| Depth |
|
21.00 / 533 |
Weights (pounds / kilograms) |
|
|
| Net Weight |
|
95.0 / 43.2 |
| Shipping Weight |
|
105.0 / 47.7 |
Performance |
| Frequency Response |
|
|
| ±3 db |
|
34 Hz - 500Hz |
| Recommended High-Pass Frequency |
|
20 |
Axial Sensitivity (dB SPL, 1 watt @ 1 m) |
|
|
| Subbass |
|
96 |
Nominal Input Impedance (ohms) |
|
|
| Subbass |
|
8 |
Power Handling (watts, continuous) |
|
|
| Subbass |
|
800 |
Calculated SPL Limit (referenced to 1 m) |
|
|
| Subbass Peak |
|
128 |
| Subbass Long Term |
|
125 | |
The vented SUB 18 and SUB 28 direct radiators have been designed for subwoofer use in active multiway systems. The superior transient response of the classic bass reflex construction is also well suited for medium to large bass arrays. The premium 700W RMS long excursion woofers feature extremely low THD, and the reliable, all-electronic Voice Coil Tracking Protection prevents thermal overload of the 100mm sandwich voice coils. For maximum dynamics, the SUB models can be driven by extremely powerful amplifiers; thermal overload triggers a virtually inaudible 'soft' power reduction.
Order-# D113129 Cabinet Subwoofer Configuration Vented Direct Radiator Nominal Impedance 8 ohms Rated Power RMS 700 watts Program Power 1400 watts Peak Power 2800 watts SPL 2,83 V/1m 98 dB max. SPL 1m (calc. with Peak) 132 dB Freq. Range (-10 dB) 35Hz - 700Hz Passive X-Over Frequency Hi-Cut VCT Protections yes Components LOW LFS 18700 Order-# D366304 Connectors SPEAKON 2x NL 4MPR 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF --- Pin Wiring Biamped LF --- Dimensons (WxHxD) mm 505x 805x 570 Net Weight 49 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel
|
The new Yamaha CW218V features a super durable, paintable, elastomeric-sprayed coating with foam lined acoustically transparent steel grilles. Gives a great professional look much preferred over carpeted enclosures. Assembled by hand in the US by skilled technicians, each cabinet is designed for better low-end response and includes heavy steel handles and sturdy pole sockets to make moving and positioning easy.
The custom drivers from Eminence feature high-strength curvilinear cones and Kapton® voice coil formers, plus oxygen-free copper voice coils and oversize strontium ferrite magnets to provide high power handling and long life. 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex, and dissipate heat. The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection.
Connections are dual Neutrik Speakon® and 1/4" jacks. With professional features, excellent sonic performance, and great value, Club Concert Series loudspeakers deliver premium quality night after night. The CW218V reigns supreme with 2 cast-frame 18" woofers and 30Hz-2kHz frequency response (-10dB). It features 1,220W program handling with 2,400W peak. Sensitivity: 98dB. 48“W x 23“H x 26“D.
|
he EV Rx218 is a 2 x 18 inch Sub Bass cabinet built with 18mm Birch Plywood providing 800 Watts of power @4 Ohms. This incredibly versatile speaker provides concert sound for people who don't want to blow the budget. Priced each.
RX218 features
- Direct radiating vented design
- High Sensitivity (99 dB)
- Solid Bass down to 35 Hz (-10 dB)
- Also perfect in combination with large HP and MH Horns
- 2 x four pin Speakon connectors
- Flying Hardware Available
- Wheel Kit Available
- Dimensions : 990mm H x 560mm W x 600mm
- Weight : 56.5 kg
|
The Sub 2.18 is a double 18“, high-power subwoofer for very high sound pressure levels: sensitivity 102 dB 1W / 1m, max. SPL 138 dB.
Boasting power handling of 1000W continuous and 4000W peak, the Sub 2.18 can be used universally for active two-way or three-way systems.
It is above all, however, the ideal companion to the C 25.2 for the creation of an active two-way system together with the DSP 260 or DSP 600 controllers and power amplifiers from the SL or LX series.
For easier transport, the Sub 2.18 is prepared for the optionally available DC-WK-C18 wheel kit.
Cabinet Subwoofer
Configuration Vented Direct Radiator
Components 2x 18" EVS-18S
Impedance 4 ohms
Rated Power RMS 1000 W
Peak Power 4000 W
SPL 1W/1m 102 dB
max. SPL 1m calc. 138 dB
Freq. Range 35 Hz - 250 Hz
Dimensions (WxHxD) mm 513 x 1200 x 710
Net. Weight 66,3 kg Wheel Kit
|
The Sub 1.18 is the ideal bass extension for the Corus C 12.2 or C 15.2 full-range cabinets.
In the low frequency range between 38 Hz and 250 Hz a Electro-Voice EVS-18S woofer in direct-radiator bass-reflex design produce an max. SPL of 130 dB.
Thanks to their low-pass filter, the Sub 1.18 can be operated simply in parallel mode to existing full-range cabinets. Also recommended, naturally, is the combination with the DSP 260 or DSP 600 and power amplifiers from the SL or LX series for the creation of active two-way systems.
The Sub 1.18 is prepaired for the optionally available DC-WK-C18 wheel kit
Cabinet Subwoofer
Configuration Vented Direct Radiator
Components 1x 18" EVS-18S
Impedance 8 ohms
Rated Power RMS 500 W
Peak Power 2000 W
SPL 1W/1m 97 dB
max. SPL 1m calc. 130 dB
Freq. Range 38 Hz - 250 Hz
Dimensions (WxHxD) mm 508 x 763 x 595
Net. Weight 38,7 kg Wheel Kit
|
Reviews
There are no reviews yet.