EAW SM 200iH-2 WAY FULL RANGE STAGE MONITOR

A 2-way switchable (passive/biamp) full range system in a vented low profile stage monitor
enclosure. Includes a 12 in woofer and a 2 in exit compression driver on a Wave Guide Plate.
Powering mode is switchable: passive (LF/HF crossover) or bi-amplified. Available in mirror-imaged
right and left versions - 999031(L)/999117 (R)
 
FEATURES:
Low-profile, 2-way stage-monitor system
12 in LF/2 in exit HF on Wave Guide Plate? (90° conical coverage pattern)
Switchable powering: full range passive or biamp (passive MF/HF)
Angles up 15° or 40°
Ideal for television applications
Digital signal processor required to achieve specified bi-amplified performance
Applications:
The SM200iH offers the lowest profile of any EAW stage monitor currently available.
The WGP eliminates horn throat distortion for natural vocal reproduction. Switch
allows passive or biamp operation. Dual NL4 connectors facilitate "daisy chaining"
multiple monitors.

SPECIFICATIONS;
Physical:
System Configuration   2-way, full range
LF Subsystem & Loading   1x 12-in Vented
HF Subsystem & Loading   1x 2-in Exit Compression Driver on Wave Guide Plat
Operating Mode   Switchable: Full Range (passive LF/HF crossover) o
Controls (switches, knobs)   Powering Mode Switch
Enclosure Material   Baltic Birch Plywood
Finish   Wear resistant textured black paint
Connector   2x Neutrik NL4 Speakon
Grille   Vinyl Coated Perforated Steel, Foam Backed
Dimensions (±0.13 in / ±3 mm)    
Front Height   14.70 / 373
Width   22.40 / 569
Depth   9.80 / 249
Minimum Stage Height   10.94 / 278
Floor Angle   40°
Weights (pounds / kilograms)    
Net Weight   58.0 / 26.4 
Shipping Weight   72.0 / 32.7
Performance:
Frequency Response    
±3 db   75Hz to 18kHz
-10 dB   63Hz
Recommended High-Pass Frequency   58
Axial Sensitivity (dB SPL, 1 watt @ 1 m)    
Full Range Passive   98
LF   98
HF   104
Nominal Input Impedance (ohms)    
Full Range Passive   4
LF   6
HF   6
Power Handling (watts, continuous)    
Full Range Passive   500
LF   500
HF   200
Calculated SPL Limit (referenced to 1 m)    
Full Range Passive Peak   131.0
LF Peak   131.0
HF Peak   133.0
Full Range Long Term   125.0
LF Long Term   125.0
HF Long Term   127.0
Nominal Dispersion (degrees @ - 6 dB)    
Conical   90°

Chassis Size    381 mm (15“)
Color    Black
Directivity Index    11.6 dB
Input Connections    2 four-pin Speakon
Speaker Type    Two-Way
Speaker Type    Wedges
Speaker Type    Fullrange
Frequency Response (-3 dB)    55 - 18000 Hz
Frequency Response (-10 dB)    46 - 20000 Hz
Internal Crossover    No
Sensitivity 1 W/1 m    99 dB
Max. SPL/1m (calc)    133 dB
Coverage
(Nominal -6 dB) H°    55 °
Coverage
(Nominal -6 dB) V°    80 °
Rotatable Horn    No
LF Transducer    EVX155
Low Frequency Power Handling (Continuous/Program/Peak)    600 Watts
High Frequency Power Handling (Continuous/Program/Peak)    75 Watts
LF Nominal Impedance    8 Ω
HF Transducer    ND6-16
HF Nominal Impedance    16 Ω
Minimum Impedance    7.2/14.3 Ω
Enclosure Material    13-ply birch plywood with Futura
Flying    No
Outdoor    No
Height    644 mm (25.35“)
Width    457 mm (17.99“)
Depth    340 mm (13.39“)
Weight Net    28.4 kg (62.61 lbs)

Description:

Following in the tradition of the original 12MX, the 10MX offers most of the same features but in a more compact enclosure. Due to its unique cabinet geometry, the 10MX is at home either on the stage as an extremely low profile stage monitor, or as a main, medium duty, front of house speaker. Adamson's Acoustic Waveguide is employed in the 10MX and its integral pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. The 10MX carries on the tradition of multi-purpose versatility.

Applications:

Extremely Low Profile Stage Monitor
Arrayable Front of House Enclosure
Theater
Houses of worship
Corporate

Features:

Unique Cabinet Geometry
Adamson AX10 Low Frequency Driver
1" High Frequency Compression Driver
Passive Operation
Adamson Acoustic Waveguide
Durable Dual Component Finish
Roadworthy Construction

Weight: 22

JBL VRX915M 15'' 2-way 800W RMS Stage Monitor

Key Features :
 
Compact and low-profile for minimal obstruction of audience sightlines

50 x 90 nominal coverage

Bi-amplified or full-range passive operation

Differential Drive woofer with neodymium magnet for high power capacity and very light weight

4" (voice coil) diameter compression driver with neodymium magnet

Specifications:

Descriptions:

The first in the MX line, the 12MX redefines the term multi-purpose. Due to its unique cabinet geometry, the 12MX is at home either on the stage as a monitor, or as a main front of house speaker. Making this enclosure even more unique is the addition of our proprietary internal crossover, allowing bi-amped or passive operation. Adamson's Acoustic Waveguide is employed in the 12MX and its integral fly points and pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. Arguably the most versatile cabinet on the market today, the 12MX sets new standards for multi-purpose speaker enclosures.

Applications:

Low Profile Stage Monitor
Arrayable Front of House Enclosure
Theater
Houses of worship
Corporate

FEATURES:

Unique Cabinet Geometry (extremely low profile)
Adamson AW12 Low Frequency Driver
1.5" High Frequency Compression Driver
Bi-amped Or Passive Operation (selectable)
Adamson Acoustic Waveguide
Integrated Fly Points And Pole Mount
Durable Dual Component Finish
Roadworthy Construction

Weight: 35

Color    Black
Input Connections    Parallel Neutrik® NL4
Speaker Type    Fullrange
Frequency Response (-3 dB)    70 - 20000 Hz
Frequency Response (-10 dB)    55 - 20000 Hz
Internal Crossover    Yes
Recommended High-Pass Frequency    60 Hz
Sensitivity 1 W/1 m    99 dB
Max. SPL/1m (calc)    132 dB
Coverage
(Nominal -6 dB) H°    90 °
Coverage
(Nominal -6 dB) V°    50 °
Rotatable Horn    No
System Power Handling (Continuous/Program/Peak)    500 Watts
LF Transducer    SMX2121
HF Transducer    DH3
Crossover Frequency    1600 Hz
Nominal Impedance (Passive)    8 Ω
Minimum Impedance    6.4 Ω
Enclosure Material    Plywood and MDF with EVCOAT
Flying    No
Height    440 mm (17.32“)
Width    364 mm (14.33“)
Depth    573 mm (22.56“)
Weight Net    19.8 kg (43.65 lbs)