Content |
Compact 1x10" cabinet with Eden designed Special Full range 300w speaker, heavy duty easy-carry steel handle > Lightweight and Compact > heavy duty hardware > Extended range Speaker > Lightweight and compact, heavy duty hardware. > Extended range speaker. |
For superior power and sound quality, this amp takes first place. Its a serious piece of kit that has a host of features that you will need when out on the road or recording. Dual input, Bass, treble, and twin parametric Mid, switchable compressor and limiter, DI socket, Tuner output and FX loop. It packs a massive 300 watts output stage that can deliver into a 4 ohm load, hook it up to a Laney RB115 to really blow your band mates, and the audience, away!
Power | 300 Watt | Driver | 2 x 10'' Celestion & Switchable Horn | Effects | - | Modeling Technology | - | Channels | 1 | Equalizer | Bass, Twin Parametric Mid ( Hi and Lo ), Treble | Output | Extension Loudspeaker, Tuner Out | Inputs | Normal Gain, High Gain | Tuner | - | Controls | Gain, Enhance, Bass, Twin Parametric Mid (Hi and Lo), Treble, Volume | Footswitch | - | FX Loop | FX Send / FX Return | DI Socket | Pre EQ Balanced XLR | Dimensions ( W x H x D ) | 57.9 cm x 42.6 cm x 39.6 cm | Weight | 25 kg |
|
Ampegʼs Portaflex PF-500 bass head delivers a staggering 500W of power in an ultra-compact design providing pure Ampeg tone in an extremely portable package. Precise tone controls and gig-friendly input/output options provide ultimate flexibility. Pair it with our PF Series flip-top cabinets for the vintage styling and portability of Ampegʼs iconic Portaflex originals.
Power: | 500W RMS @ 4 ohms 5% THD | Channels: | 1 | Equalizer: | 3 band EQ | Inputs: | Bass Input, Audio Input, Power Amp In | Outputs: | Headphones Output, Speaker Output Speakon, Tuner Out, Preamp Out, XLR Line Out Jack | Controls: | Mute, -15db, Compression, Gain, Ultra Hi / Lo, 3 Band EQ, Frequency, FX mix, Volume | Dimensions ( W x H x D ): | 27.5 x 6.9 x 27.2 cm | Weight: | 3.5 kg |
|
Marshall VBC810 Bass Amplifier Cabinet for use with VBA400
The VBC810 is a specially designed, heavy duty 8x10" cabinet for use with the VBA400 head. Built as only Marshall knows how, it features four separate sealed chambers which help to prevent unwanted cabinet resonance while adding to the structural integrity of the unit. It is also lined with sound absorbent wadding to further help dampen internal resonance.
It comes loaded with custom designed loudspeakers which have been specially designed to handle the power of the VBA400's output while giving you superb, professional performance. Operating at 4 Ohms impedance it has been designed to perfectly complement the VBA400. As the amplifier will accept a load of 2 Ohms, combinations of two cabinets can be used to create an awesome bass rig.
Clad in Marshall's trademark, heavy duty, black vinyl, the 640 Watt VBC810 boasts roadworthy, high grade fittings, including a recessed handle on the bottom for easy lifting, castors and kick plate for easy tilt and roll capability.
Speaker Configuration 8x10" Power Handling (RMS) 640W Impedance 4 Ohms Weight - 73 kgs Dimensions (mm) 675x1265x410
|
Eden WTX264 Bass Amplifier Head Features: >Eden's proprietary Enhance control >3-band EQ with Dynamic Bass Boost and Mid-shift functions >Studio-quality DI with level and ground lift >FX loop >Stereo Aux Inputs >Tuner and Headphone outputs >Two 1/4" and one NL-4 (Speakon) Speaker outputs >Optional Rack-mount hardware >Power 4 Ohms: 260-300W RMS @4 Ohms >Damping Factor: 4000 >Distortion: .006% >Frequency Response: 10Hz-20KHz ±2dB >Headroom: 3dB >Dimensions: 8“W X 2.5“H X 9“D >Weight: 4.3 LBS |
Now we're getting into serious power and performance territory. The RB6 can deliver 165 watt of floor shaking bass from its precision tweaked power amp stage. Connect a RB115 or RB410 to really get the neighbours complaining. Check out its versatile EQ section (Bass, Twin parametric EQ, Treble and Enhance) controls to dial in any tone you like.
Power | 165 Watt | Driver | 1 x 15'' Celestion & Switchable Horn | Effects | Compressor, Limiter | Modeling Technology | - | Channels | 1 | Equalizer | Bass, Twin Parametric Mid (Hi & Lo), Treble | Output | Extension Loudspeaker, Tuner Out | Inputs | Normal Input, High Input | Tuner | - | Controls | Gain, Enhance, Bass, Twin Parametric Mid ( Hi & Lo ), Treble, Master Volume | Footswitch | - | FX Loop | FX Send / FX Return | DI Socket | D.I Balanced XLR | Dimensions ( W x H x D ) | 50.2 cm x 56.5 cm x 49 cm | Weight | 29 kg |
|
Reviews
There are no reviews yet.