| Description | | |
- Easily connect your compatible Bluetooth devices for high-quality wireless playback
- Active speaker with a passive slave speaker, with the ability to daisy-chain multiple sets
- 2-way speaker design with flared baffles for a smooth full-range frequency response
- Quick and easy to install in false or suspended ceilings using the built-in dog-ear clamps
- Comes complete with an in-line 12VDC power supply for intuitive use out of the box
| Characteristics
Type: 2.0 powered multimedia speaker system
Amplifier Type: Dual analog class A / B monolithic
Maximum power: 60W (15W RMS / 30W peak per channel)
Drivers 2.75 ″ aramid fiber woofers, 3/4 ″ silk dome tweeters
Entrance : 3.5mm stereo mini-jack, stereo RCA, USB, Bluetooth
Exit : RCA line-out, 3.5mm mini-jack headphone out
Sensitivity: > 95dB
Frequency response -65Hz-22kHz +/- 2.0dB | Characteristics
- Amplifier type: category AB
- Maximum output power: 61 W
- RMS power: 15 W / 30 W maximum per channel
- Woofer 2.75 ”aramid fiber
- Tweeter 0.75 ”Silk dome
- Inputs: 3.5 mm stereo mini-jack, RCA L / R, USB, Bluetooth
- Outputs: RCA variable line-out, 3.5 mm mini-jack headphone out
- Input voltage: 110-240 V 50/60 Hz auto-switching
- SNR> 95 dB (typical A-weighted)
- THD + N <0.05% in all power settings
- Crosstalk <50 dB
- Frequency response: 65 Hz-22 kHz ± 2.0 dB
- Input resistance: 5K ohms unbalanced
- Protection: Output current limitation, thermal overheating, temporary on / off protection
| |
| Content | Overview:
Active USB bookshelf speaker Angled speaker positioning to optimize listening experience 2? inch (70mm) mid-range and treble units with dual magnetic circuit design Master volume with built-in power switch USB audio streaming capability and 3.5mm auxiliary input Wooden enclosure to minimize acoustic resonance
Features:
Total power output:RMS 2W ? 2 (THD+N=10%, f0=1 KHz)
Signal to noise ratio:?80 dBA
THD - Total Harmonic Distortion:? 0.5%
Frequency response:150Hz ~ 20 KHz (+/-5db)
Input sensitivity:USB: 650 mFS±50 mFS AUX: 500 mV±50 mV
Input Type:USB audio/AUX
Speaker unit: 2? inch (70mm) | S350DB
Old School Style Modern Sound
- Titanium Dome Tweeters
- 8-Inch Booming Subwoofer
- Bluetooth 4.1 aptX Wireless Sound
Fully Featured Bookshelf Speakers.
Most 2.1 systems include tiny satellite speakers and make up for the small sound from satellites with their subwoofer. With the S350DB you get both a massive subwoofer and fully featured bookshelf speakers. Connect your sources via Bluetooth, RCA, optical, coaxial or AUX with these.
Side Panel Controls
Take full control of your audio with the side panel controls on the side of one of the bookshelf speakers. Three knobs are located on the side that effect the bass, treble and volume for the entire 2.1 system. Once switched on, the power light will appear on so you know your system is working.
8-Inch Subwoofer for Deep Lows
Receive deep satisfaction from the rumbling lows from the S350DB when the 8-inch subwoofer is activated during playback. Movies, music, and games come to life when you have this subwoofer attached and producing sound.
Side Panel Bass Reflex Port
This subwoofer has an enhanced side panel bass reflex port. This reflex port enhances your listening experience for all types of bass sounds. Enjoy deep rumbling lows from your favourite movies, music, games and so much more with this 2.1 system.
Titanium Dome Tweeters
The S350DB is equipped with two bookshelf satellite speakers that have titanium dome tweeters that aid in producing a sound that provides clear highs in any genre of music or videos and movies. The titanium dome tweeters are ¾-inch in size.
Wireless Remote Control
Switch between inputs and control playback with the wireless remote for the S350DB. Switch between optical, coaxial, auxiliary and Bluetooth inputs from a range. Also, control the volume or playback controls, as well as, switch the speakers on or off with the wireless remote.
Digital Signal Processing
The S350DB has a built-in amplifier that helps power and drive the speakers. As such, the S350DB uses digital signal processing. This helps the speakers provide a clear and standardised levels when processing digital signals.
Dynamic Range Control
The S350DB comes with a built-in amplifier that powers and amplifies both the bookshelf speakers and subwoofer. This system uses a dynamic range control for amplifying quiet sounds as well as reduce loud sounds that may cause clipping and unpleasant sounds.
- POWER OUTPUT:R/L(treble): 15W+15W
R/L(midrange and bass): 25W+25W
SW: 70W
- SIGNAL TO NOISE RATIO:R / L: ≥ 80dB (A) ; SW: ≥ 85dB
- FREQUENCY RESPONSE:R/L: 160Hz -20KHz ; SW: 40Hz –160Hz
- INPUT SENSITIVITY :PC : R/L: 600±50mV ; SW: 270±20mV
AUX: R/L: 400±50mV ;
SW: 200±20mV
Optical/Coaxial:R/L: 400±50mFFS ;
SW: 200±20mFFS Bluetooth: R/L: 400±50mFF;
SW: 200±20mFFS
- INPUT TYPEPC AUX Optical Coaxial Bluetooth
- DIMENSIONS :Subwoofer: 312*265*298mm
Satellite: 222H x 127W x 156Dmm( 8.75H x5W x 6Dinches)
- WEIGHT:19.1kg
|
Take your ceiling installation to the next level. Boasting intuitive Bluetooth connectivity, the Adastra BCS52S Ceiling Speakers let you play your music wirelessly with ease. Bluetooth connectivity is switchable, whilst line inputs and outputs let you hook up other sound sources as well as providing simple daisy-chaining capabilities. Combined with their 2-way design and flared baffles, the BCS52S speakers provide you with smooth, high-quality full-range audio for domestic and commercial installations.
The speakers are simple to fit and operate. With integrated dog-ear mounts, you can unobtrusively mount the speakers to false/suspended ceiling tiles with ease. The single active speaker is powered by the included 12VDC PSU, which then drives the other passive slave speaker. And with low-profile magnetic grilles, your speakers can be made to blend with your decor for a subtle and understated look.
In the Box
- 1 x Active Bluetooth Ceiling Speaker
- 1 x Passive Ceiling Speaker
- 1 x In-Line 12VDC Power Supply
- 1 x 3-Metre Speaker Connection Cable
Features
- Ceiling speaker set with switchable Bluetooth connectivity
- Simple playback compatibility with various devices
- One active speaker with a Bluetooth receiver, and one passive slave speaker
- Active speaker boasts an RCA line input and output for daisy-chaining multiple sets
- Each speaker features low and high-frequency drivers plus flared baffles
- Smooth full-range response from 80Hz to 20kHz
- Understated low-profile magnetic grilles
- Dog-ear clamps provide quick and easy installation
- Includes an in-line 12VDC power supply for easy use
- Suitable for domestic and commercial use
Specifications
- Transducers:
- LF Driver: 5.25'' (135mm)
- HF Driver: 0.5'' (12mm) neodymium dome tweeter
- Sensitivity: 89dB
- Dispersion Angle: 160°
- Frequency Response: 80Hz - 20kHz
- Impedance: 4 Ohms (each speaker)
- Bluetooth Version: 5.0
- Mounting Depth:
- Active: 95mm
- Passive: 75mm
- Cutout: 180mm (each speaker)
- Housing Material: ABS plastic
- Power Supply: In-line 100-240VAC/12VDC PSU (included)
- Dimensions:
- Active: 97mm x 205mm
- Passive: 76mm x 205mm
- Weight: 1.78kg (per set)
| THE ABSOLUTE MINI MUSIC SYSTEM
Our HD series is designed for the way people listen to music today - wireless streaming, digital downloads, vinyl, etc. HD3 sets a new standard for compact mini music systems, thanks to its flexibility and ability to play all your music from any device.
REMOVAL OF LOST CONNECTIONS
Connect it to HD3 in any way you want: wireless or wired, digital or analog. Stream your music library, TIDAL, Spotify, Pandora, YouTube, etc. to HD3 from almost anywhere in your home without giving up. Setting up a wireless connection is an aura and only takes a minute. And if you use HD3 on your desktop, connect it with a USB cable. The USB port overrides your computer's built-in low-quality headphone jack for a high-quality listening experience. But if you are not good at USB or wireless, you can still use any audio cable to connect.
YOU JUDGE THE GO-TO SYSTEM
Easy tuning, simple and useful features and wide stereo sound make HD3 your music system. The HD3 is expandable, so if you want deeper bass just plug in your subwoofer. No matter how you listen to music, HD3 covers you.
CONNECT YOUR HEADQUARTERS
The HD3 includes a dedicated high-performance headphone jack so you can listen and not wake up your neighbors. The headphone quality headphone amplifier delivers top sound that drives even the most demanding headphones.
RETRO-FUTURE DESIGN
The HD3 is designed for sound performance, but the speakers obviously need to look good, so we've included wood veneers, aluminum trim and detachable magnetic grilles to match any decor. Available in satin black as well as real walnut and cherry wood at no extra cost if you really want to prove it.
SMALL SPEAKERS THAT IMPRESS
Built-in power amplifiers save space and eliminate the need to connect an HD3 to a stereo receiver or external power amplifier. Simply plug the left speaker into an electrical outlet and connect the speaker cable included on the left to the right speaker. All the internal components of the HD3 are designed and tuned together to give you Audioengine signature sound and a much more efficient system than traditional stand-alone speakers and amplifier. |
PRODUCT DESCRIPTIONAudioengine HD3 Self-Amplifying Bookshelf Speakers 2.75 ”15W RMS Walnut (Pair) artsound hxeio wireless2
The HD3 High Power Speakers are a mini home music system with high fidelity stereo sound for smaller spaces and desktops. Wired or wireless connections, including USB audio from your PC, wireless aptX-HD Bluetooth long-range from your phone, or the good old-fashioned 80's analog vintage turntable or cassette player.
HD3 wireless speakers work with all your applications, music and devices. Tidal, Spotify, Pandora… all your favorite streaming apps play right away.
AptX-HD long range wireless Bluetooth
High quality sound wrapped in handmade wooden cabinets
Simple setup, no receiver required
There are no push buttons and inputs that are always ready
Front panel volume control and headphone jack
HD3 cordless speakers are small speakers with surprisingly loud sound for their size.
No network setup, login passwords, or forward buttons Setting up these speakers is simple and easy.
The HD3 wireless speakers are made with custom Audioengine accessories: aramid fiber woofer, silk tweeters, aptX HD Bluetooth and built-in power amplifiers wrapped in handmade precision cabinets.
Clear, complete and powerful sound that fills almost any space.
Built-in analog power amplifiers sound incredible compared to lower cost digital amplifiers.
A completely new audio experience guaranteed. | Easy-to-use mini speakers with easy connection to improve computer sound, wherever you are!
Up to a 200% upgrade of audio performance compared to built-in speakers.
They have a small volume and weight and are easily transported.
They work with USB and do not need a separate power supply.
With switch to adjust volume.
With alternating lighting!
No driver required.
Output: 3Watt x 2.
Sensitivity: 500mV.
Frequency response: 20Hz – 18KHz.
S / N ratio: 65dB.
Isolated value: 45dB
Resistance: 4ohm.
Speaker unit: 52mm.
Power: USB 5V.
Size: 11.6×8.1×9.2cm. |
Reviews
There are no reviews yet.