EIKON by Proel LCH-100SE Lavalier Mic with 3.5mm jack input

12%
eikon-proel-logo
All products by EIKON

€16.89 incl. GR VAT

In stock

EAN: N/A
Installments calculation €
CompareAdd to wishlist Submit Better Price
Availability: Available Available SKU: H10PR00038 Category:
Weight 0.20 kg

Reviews

There are no reviews yet.

Be the first to review “EIKON by Proel LCH-100SE Lavalier Mic with 3.5mm jack input”

Your email address will not be published. Required fields are marked *

Quick Comparison

EIKON by Proel LCH-100SE Lavalier Mic with 3.5mm jack input removeShure WL51B & WL51W Lavalier Condenser Microphone removeShure MX150B/C - XLR Lavalier Condenser Microphone Cardioid removeRODE Lavalier Microphone removeShure WL93 & WL93T Lavalier Omni Condenser Microphone removeRODE Smart Lav+ Lavalier microphone for smartphones remove
NameEIKON by Proel LCH-100SE Lavalier Mic with 3.5mm jack input removeShure WL51B & WL51W Lavalier Condenser Microphone removeShure MX150B/C - XLR Lavalier Condenser Microphone Cardioid removeRODE Lavalier Microphone removeShure WL93 & WL93T Lavalier Omni Condenser Microphone removeRODE Smart Lav+ Lavalier microphone for smartphones remove
Image
SKUH10PR00038WL51B & WL51WMX150B/C - XLRH11RD00028WL93 & WL93TH11RD00044
Rating
Price €16.89 incl. GR VAT €291.00 incl. GR VAT €310.00 incl. GR VAT €204.00 incl. GR VAT €198.00 incl. GR VAT €65.00 incl. GR VAT
Stock

In stock

In stock

In stock

In stock

In stock

In stock

AvailabilityIn stockIn stockIn stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content




    All models include foam windscreen, swiveling lapel clip, dual tie clip, pin mount, magnet mount
    Subminiature size (5.8 mm diameter x 11 mm height)
    Electret condenser cartridge
    Unidirectional pattern
    One termination: 4-pin mini connector (fits directly into Shure wireless transmitters)
    High Boost equalization caps included for optimal clarity and response
        Provides a 10 dB boost centered at 12 kHz

    Used in applications that require a chest-worn microphone

Black and white models available
All models include magnet mount, lapel clip, dual tie clip, pin mount, and two foam windscreens and carry case
requency response: 20-20,000 Hz
Low visibility with a variety of options for mounting
Low handling noise
Legendary Shure quality, ruggedness, and reliability

Transducer     Electret condenser
Polar Pattern     Cardioid
Frequency Response     20 to 20,000Hz
Output Impedance     165.5 Ω
Sensitivity     -39.0 dBV/Pa (11.0 mV)
Max Input Sound Level (SPL)     1000 Ω load: 129.5 dB SPL; 2500 Ω load: 134.5 dB SPL
Signal-to-Noise Ratio     57.0 dB
Dynamic Range     @1kHz
1000 Ω: 92.5 dB SPL; 2500 Ω: 97.5 dB SPL
Self Noise     37.0 dB
(equivalent SPL, A-weighted, typical)
Clipping Level     1000 Ω load: 1.0 dBv; 2500 Ω load: -4.5 dBv
Operating Temperature     Operating: 0 to 135°F (-18 to 57°C)
Storage: -20 to 165°F (-29 to 74°C)
Polarity     XLR: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Power Requirements     11-52VDC phantom power (IEC-61938), Dimensions (LxDiameter)     Length: 5' (1.52m)
Diameter: 0.23" (5.8mm)
Weight     4.3 oz (121 g)

Type  Condenser - Omni
Frequency Ressponse    60Hz - 18kHz
Sensitivity    -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
 Resistance   3000Ω
Dimensions   4.50mmW x 12.00mmH x 4.50mmD
Weight   1.00gm
Accessories    Αntitrauma case,WS-LAV, Minifur LAV, Micon cable, Spanner

Subminiature lavalier design; ideal size for theater, television, broadcasting, video, film, and sound reinforcement Small, inconspicuous mounting hardware Full, clear sound comparable to larger microphones Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation Controlled low-frequency rolloff reduces low-frequency clothing and room noise Low distortion, wide dynamic range Uniform omnidirectional polar pattern Preamplifier assembly (SM93) can be pocketed, strapped to the body, or clipped to belt or waistband Wide-range phantom powering (SM93) accepts all commonly used voltages Type Condenser (electret bias) Frequency Response 50 to 20,000 Hz Response Curve Image Small SM93 WL93 View Larger Polar Pattern Omnidirectional, uniform with frequency Output Impedance 3000 ohms Output Level (1 Pascal = 94 dB SPL) Open Circuit Voltage: -38 dBV/Pa (13 mV) Output Clipping Level (at 1,000 Hz) 0.25 V at 120 dB Total Harmonic Distortion Less than 1% at 120 dB Maximum SPL 120 dB Dynamic Range (maximum SPL to A-weighted noise level) 102 dB Output Noise (equivalent SPL) 18 dB typical, A-weighted Signal-to-Noise Ratio 76 dB at 94 dB SPL (IEC 651) Polarity Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground)* *Produces positive voltage at pin 2 of Shure wireless receiver three-pin connector Recommended Operating Voltage 2 to 10 V; 5 V nominal (pin 2 to pins 3 and 4) Current Drain 40 microA typical Environmental Conditions Operating Temperatures: -18 to 57 degrees C (0 to 135 degrees F) Storage Temperatures: -29 to 74 degrees C (-20 to 165 degrees F) Cable Black 1.27 m (4.17 ft), attached, two-conductor, shielded, terminated by miniature connector type TA4F (WL93T: Tan 1.27 m [4.17 ft]) Case Microphone: Black ABS thermoplastic case with stainless-steel-mesh grille Net Weight Microphone: 16 g (0.57 oz)

The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment.

With the smartLav+ the user simply mounts the microphone on the talent, connects it to a smartphone or tablet headset jack and records via the RØDE Rec app for iOS, or any other audio app of their choice.

By employing a professional quality omni-directional condenser capsule the smartLav+ picks up sound equally from all around the microphone, allowing for versatility when mounting and ensuring a high degree of user-friendly operation.

A foam pop shield is supplied to minimise wind noise and vocal plosives (hard ʽbʼ, ʽtʼ and ʽpʼ sounds), as well as a durable mounting clip with in-built cable management. Its Kevlar® reinforced cable ensures that you never stretch or snap your microphone under normal usage conditions.

The smartLav+ is compatible with any audio app that accepts input from the headset connection, however it has been designed to pair perfectly with RØDEʼs RØDE Rec app for Apple iOS devices. RØDE Rec turns the userʼs iOS device into a fully-featured field recorder, with a wide range of equalisation presets to suit various recording situations, in addition to professional editing functions and the ability to publish to SoundCloud and Dropbox direct from the app.

 

Acoustic Principle    Pressure Gradient
Active Electronics    JFET
Capsule    0.10“
Polar Pattern     [Omnidirectional - picks up all sides equally]
Address Type    End
Frequency Range    20Hz - 20kHz (selected HPF @ 0)
Output Impedance    0Ω
Maximum SPL    110dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level    189.0dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity    -35.0dB re 1 Volt/Pascal (17.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)    27dB-A
Weight     6.00gm
Dimensions    1180.00mmH x 4.50mmW x 4.50mmD
Dimensions    1180.00mmH x 4.50mmW x 4.50mmD
Output     TRRS Output
Warranty     1 year

 


 

Weight0.20 kg0.20 kg0.20 kg0.20 kg0.20 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.20 kg
Weight 0.20 kg
Weight 0.20 kg
Weight 0.20 kg
Weight 0.20 kg
Weight 0.50 kg

Related products