Description |
- Vacuum preamplifier Tube
- Bass Amplifier application
- Preferred by guitar technicians for re-tubing and upgrading, but equally well suited for HiFi applications
- High Gain, Low noise, low microphonics
- High Quality and Durable
- High Quality and Durable
- 12AX7 /7025 / ECC83 equivalent
- Made In Russiα
|
- ECC81/12AT7-CZ
- Premium Selected
- Optimised for use as a balanced phase driver
- Also provides powerful amplification, which ideally meets the special requirements as a driver tube for the improved dynamics of the output stage
| | 12AX7 (ECC83) TUNG-SOL
The Ultimate 12AX7. Big, warm, and musical. High Gain, ultra-low microphonics, and superb linearity with a dynamic 3-D sound.
| | |
Content | Description
NN095-MP Electro Harmonix 12AX7 / ECC83 Matched pair
Vacuum tube 12AX7ЕН, 12AX7SV is a miniature twin triode with equipotential cathodes, designed to amplify low frequency voltage in radio engineering devices. Top choice for gutiar / bass amp application with all the right ingredients. Excellent tonal bal-ance, harmonic content, low noise floor, and low microphonics. The tone is more vintage sounding, and also does very well in audiophile application. The 12AX7-EH tube has a nice balanced sound, a very low noise floor and excellent perfor-mance in terms of microphonics. The lack of microphonics is due in part to the return of a shorter plate structure and better materials.
- Bass Amplifier application
- Preferred by guitar technicians for re-tubing and upgrading, but equally well suited for HiFi applications
- High Gain, Low noise, low microphonics
- High Quality and Durable
- High Quality and Durable
- 12AX7 /7025 / ECC83 equivalent
- Made In Russiα
Tube Type: |
12AX7/ECC83/7025 |
Socket: |
Noval(9 Pin) |
| The JJ ECC81 / 12AT7 tube is a low noise and low microphonic preamp tube. A good choice for phase inverters and reverb circuits calling for 12AT7 tubes.
- 9 pin miniature preamp tube (amplification factor = 60),
- Less gain than a 12AX7
- Preferred by blues and jazz guitarists alike
Socket: |
Noval(9 Pin) |
Tube Type: |
12AT7/ECC81/6201 |
| 5751 can be used in most 12AX7 circuits to achieve more headroom.
It has a lower gain about 70% than the standard 12AX7. Good to rope the gain of a high gain amplifier.
Tube Type: |
5751(12AX7/ECC83) |
Socket: |
Noval(9 Pin) |
| Description
NN099-MP Tung Sol 12AX7 / ECC83 Mached Pair
Premium high gain Twin Triode featuring ultra-low microphonics, and a big, warm and very musical soundstage. Performance surpassing NOS original in all areas.
- Improved reissue of the Vintage NOS Tung Sol 12AX7
- Superb linearity with a dynamic 3-D sound
- Preferred by guitar technicians for re-tubing and upgrading, but equally well suited for HiFi applications
- 7025 / ECC83 equivalent
- Made In Russiα
Strongly committed to quality manufacturing, Tung Sol tubes have always been known for their reliability and great tone. Today’s new production Tung Sol tubes are constructed with the same commitment to quality and reliability. Tung Sol tubes reflect the best in vintage Tung-Sol construction with unsurpassed tone and reliability. | The TAD JJ EL34 Quartett Matched Tubes
The JJ Electronic EL34 is another classic from JJ.
This tube features a rugged construction leading to an incredibly reliable EL34 with astonishing tone.
Overall the sound is nicely balanced with tight lows, a rich and dynamic mid range and clear highs.
The JJ EL34 is a great replacement for guitar amplifiers and stereo amps.
Base: OCTAL uf = 6,3 V I f = 1,5 a Typical Characteristics: ua = 250 V ug3 = 0 V ug2 = 265 V ug1 = from -10 to -13,5 V (for eL34) from -13,5 to -16,5 V V (for e34L) I a = 100 ma I g2 = 14,9 ma S = 11 ma/V R i = 15 kΩ μ g2/g1 = 11
Limiting Values: ua0 = 2000 V ua = 800 V W a(max) = 25 W ug20 = 800 V ug2 = 450 V W g2(max) = 8 W I k = 150 ma uk/f = 100 V R k/f = 20 kΩ Capacitances: c g1 = 15,5 pf c a = 10 pf c a/g1 = 1,3 pf | GROOVE TUBES GT 12AT7 PREAMP TUBE
The Groove Tubes GT-12AT7 preamp tube is manufactured to the highest quality JAN spec. NOS, made in Russia for extremely long life.
Used widely in most U.S.-made amps and, in particular, Fender amps. Fender amps with reverb use 2 - 12AT7s -- one for the reverb drive stage, and one as a phase inverter to drive the push/pull output stage. The makeup of the 12AT7 is very similar to the 12AX7 and it can be substituted for a 12AX7 in a pinch. Some players prefer the 12AT7 in the driver stage of a Marshall for a cleaner, brighter tone. (The driver or phase inverter is the 12AX7 located nearest the power tubes.) The 12AT7 is rarely used in a tone-generating stage, but rather in function stages, so the Groove Tubes GT-12AT7 is selected for durability.
Country of origin: Russia |
Reviews
There are no reviews yet.