| Content |
Get down! Generates deep, phat bass tones one octave below the notes you play. Two separate smoothing filters enable you to tailor your sub-octave signal to the exact bass sound you desire, separating the Octave Multiplexer from other octave devices. Run your vocals through it and sound just like Ike Turner. This is a monophonic device and works only on single notes. | Studio Quality Effects at Your Feet
Premier recording studios worldwide use Eventide on hit after hit. ModFactor features Eventide's 27 best modulation effects without compromising quality OR flexibility.
Flexibility Built-In
Plug-and-play expression pedal control of wet/dry mix or any combination of parameters. Control program changes and vary parameters continuously via MIDI. Supports instrument or line level inputs and outputs. Plays well with others; adapts seamlessly with a wide variety of amps and other foot pedals.
Obsolescence is so 20th Century
Easy to upgrade; download new software from the Internet and install via USB.
Features
- 27 of Eventideʼs signature stereo or mono effects:
- Liquid Chorus
- Shimmer Chorus
- Organic Chorus
- Negative Phaser
- Postive Phaser
- BiPhase Phaser
- Feedback Phaser
- WahWah Q-Wah
- Voc-Wah Q-Wah
- Positive Flanger
- Negative Flanger
- Jet Flanger
- Thru-o Flanger
- Lowpass ModFilter
- HiPass ModFilter
- BandPass ModFilter
- Standard Rotary
- Giant Rotary
- Bias Tremolo
- Opto Tremolo
- Modern Vibrato
- Vintage Vibrato
- Retro Vibrato
- Pitch Undulator
- Feedback Undulator
- Ring (DC) Ringmod
- String (AC) Ringmod
- Studio quality sound
- Software upgradeable via USB 2.0
- MIDI control via USB or MIDI in, out/thru
- Instant program change
- Real-time control with 10 knobs, MIDI, or expression pedal
- Tap tempo and MIDI clock sync
- 40 factory presets, unlimited through MIDI
- True analog bypass
- Rugged cast metal construction
- Reliable metal footswitches for instant preset access
- Mono or stereo operation
- Guitar or line level inputs and outputs
SPECIFICATIONS:
| Analog Input/Output |
| Input impedance |
500K ohms |
| Output Impedance |
470 ohms |
| Recommended Load Impedance |
10K ohms or greater |
| Connectors |
| Input 1 (mono) |
¼ inch mono phone jack |
| Input 2 |
¼ inch mono phone jack |
| Output 1 (mono) |
¼ inch mono phone jack |
| Output 2 |
¼ inch mono phone jack |
| Expression Pedal |
¼ inch mono phone jack |
| Aux Switch |
¼ inch stereo phone jack |
| USB |
Type B Socket. Use 2.0 cables only. |
| MIDI In |
Five pin DIN (Female) |
| MIDI Out/Thru |
Five pin DIN (Female) |
| AC Adapter Jack |
Power Supply included (see below) |
| Physical |
| Power |
9 VDC, 1200 mA, Tip hot (+) |
| Dimensions |
English: 4.8" (H) x 7.5" (W) x 2.12" (D)
Metric: 122 (H) x 190 (W) x 54 (D) mm |
| Weight |
2.15 lbs, 1kG |
|
Tame your tone with the new Snake Charmer Compressor. The result? Silky smooth, mesmerizing tone that behaves as it should. The Snake Charmerʼs compression affects the ratio and threshold of the signal, smoothing out peaks and spikes. At the same time, the Snake Charmer also increases the Gain level to complement the corresponding ratio and threshold settings so that the overall gain remains constant.
Thereʼs also a Gain Reduction Indicator that gives you visual cues of the results of your settings. And a High/Low Switch lets you choose between two overall levels of ratio. The Snake Charmer is equipped with other controls for Attack, which determines how quickly the gain reduction kicks in, and Release, which determines how long the gain is attenuated. Finally, the High-End Emphasis control fine-tunes the amount of compression applied to the top end of the guitar signal.
- Snake Charmer Compressor CT05
- Connection: Input: x1 (guitar input), Output: x1 (line output)
- Input / Output Impedance: 830 k-ohm / 4 k-ohm
- Tube: 12AU7 (ECC82)
- Power Supply: Four AA alkaline batteries or DC9V AC adapter
- Battery Life: Approx. 18 hours
- Current Consumption: 95 mA
- Dimensions: 168.5 (W) x 155.5 (D) x 64.0 (H) mm / 6.63” (W) x 6.12” (D) x 2.52” (H)
- Weight: 1,007 g (excluding batteries / 1,102 g including batteries)
- Included Items: Four AA alkaline batteries
| The Marshall EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay. Add dense rhythmic textures to your sound.
The Marshall EH-1 ECHOHEAD recreates six different delay effects for you to explore, from crystal-clear echoes to hypnotic reverse delays via the vintage whir of a retro tape machine. Create pulsing tones from your guitar rig and add dense rhythmic textures to your sound. The EH-1 Echohead features a maximum delay time of 2000ms, stereo outputs and a tap tempo delay imput. The EH1 Echohead dual outputs offer the choice of using a passive bypass for the main signal path to ensure complete tonal integrity or to allow your pedal to spill over, permitting your echo to naturally die away.
The main features of the Marshall EH-1 ECHOHEAD include:
- 6 different, high quality delay effects for you to explore
- Multi-mode selector switch
- Delay time control
- Feedback control
- Level control
- Solid metal casing
- Passive bypass
- Tap tempo pedal input
- Power: 9V DC Centre Negative Regulated PSU or PP3 battery
- Minimum Current Draw: 80mA
- Switches: On/Off Switch
- Indicators: On/Off LED
- Jacks: 2 Input, 2 Output 'Jack sockets' (1/4 inch)
- Input Impedance: 1MOhm
- Output Load Impedance: less than 1kOhm
- Dimensions: 120mm x 65mm x 55mm
- Weight: 510 grammes
| The FZ-5 is a modern pedal built for the modern guitarist, but the sounds you can get from the FZ-5 are pure retro. Looking back at the glorious rock sounds of the ʼ60s and ʼ70s, the FZ-5 recreates its vintage fuzz through BOSS state-of-the-art COSM technology. Recall the fuzz-filled flavors of classic pedals such as the Maestro FZ-1A, Fuzz Face, and Octavia pedals, and kick ʼem into overdrive with the FZ-5ʼs Boost knob. BOSS' proprietary COSM technology allows guitar players to recreate classic fuzz BOOST control for more aggressive tone. The FZ-5 is the perfect weapon for players wanting to beef up their rigs with classic retro fuzz artillery.
- Vintage sounds inspired by famous fuzz pedals of the ʼ60s and ʼ70s
- Uses advanced COSM technology to recreate classic fuzz
- BOOST control for more aggressive tone
- Road-tough BOSS metal construction
| Nominal Input Level |
-20 dBu |
| Input Impedance |
1 M ohm |
| Nominal Output Level |
-20 dBu |
| Output Impedance |
1 k ohm |
| Recommended Load Impedance |
10 k ohms or greater |
| Controls |
Pedal switch, LEVEL knob, FUZZ knob, MODE knob |
| Indicator |
CHECK indicator (Serves also as battery check indicator) |
| Connectors |
INPUT jack, OUTPUT jack, AC adaptor jack (DC 9 V) |
| Power Supply |
DC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional) |
| Current Draw |
36 mA (DC 9 V) |
| Expected battery life under continuous use |
Carbon: 3 hours, Alkaline: 10 hours * These figures will vary depending on the actual conditions of use. |
| Accessories |
Owner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), MODE sticker, Dry Battery 006P/9V (6LR61) |
| Options |
AC Adaptor (PSA series) |
| Size and Weight |
| Width |
|
| Depth |
|
| Height |
|
| Weight |
|
|
The Digitech XHP HYPER PHASE Guitar Effect Stomp Box Pedal. Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds.
The Digitech XHP Hyper Phase delivers 7 operational modes, instead of the typical one mode only that you find in some other pedals. These operational modes are easily selectable using the mode control allowing you to choose from a selection of awesome voicing sounds, triggering feature, and useful step functions. Now you are no longer limited to a one-trick pedal. You can dial in the exact phaser or flanger sound you want! The Hyper Phase has Speed, Depth, Regen, and Mode controls. Outputs for both pedals include Out 1 (Mono) and Out 2 for stereo operation.
The main features of the Digitech XHP HYPER PHASE include:
- Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds
- 7 Different phase types
- Speed, Depth, Regen, and Mode controls
- Triggering and step capability
- Stereo outputs with switchable CIT Cabinet Modeling
|
Reviews
There are no reviews yet.