EHX re-creates the classic fuzztone pedal with the Satisfaction Fuzz, now updated with true bypass circuitry for optimum signal path integrity. The Satisfaction Fuzz features an elemental two-knob layout with controls for Volume and Attack (fuzz). True to the genre, this classically-voiced fuzztone creates a sound that is anything but subtle and goes from an […]
EHX re-creates the classic fuzztone pedal with the Satisfaction Fuzz, now updated with true bypass circuitry for optimum signal path integrity.
The Satisfaction Fuzz features an elemental two-knob layout with controls for Volume and Attack (fuzz). True to the genre, this classically-voiced fuzztone creates a sound that is anything but subtle and goes from an aggressive rasp to full-on fuzzed-out mayhem!
Weight
1.00 kg
Reviews
There are no reviews yet.
Be the first to review “ELECTRO-HARMONIX Satisfaction Fuzz” Cancel reply
EHX re-creates the classic fuzztone pedal with the Satisfaction Fuzz, now updated with true bypass circuitry for optimum signal path integrity.
The Satisfaction Fuzz features an elemental two-knob layout with controls for Volume and Attack (fuzz). True to the genre, this classically-voiced fuzztone creates a sound that is anything but subtle and goes from an aggressive rasp to full-on fuzzed-out mayhem!
The FZ-5 is a modern pedal built for the modern guitarist, but the sounds you can get from the FZ-5 are pure retro. Looking back at the glorious rock sounds of the ʼ60s and ʼ70s, the FZ-5 recreates its vintage fuzz through BOSS state-of-the-art COSM technology. Recall the fuzz-filled flavors of classic pedals such as the Maestro FZ-1A, Fuzz Face, and Octavia pedals, and kick ʼem into overdrive with the FZ-5ʼs Boost knob. BOSS' proprietary COSM technology allows guitar players to recreate classic fuzz BOOST control for more aggressive tone. The FZ-5 is the perfect weapon for players wanting to beef up their rigs with classic retro fuzz artillery.
Vintage sounds inspired by famous fuzz pedals of the ʼ60s and ʼ70s
Uses advanced COSM technology to recreate classic fuzz
BOOST control for more aggressive tone
Road-tough BOSS metal construction
Nominal Input Level
-20 dBu
Input Impedance
1 M ohm
Nominal Output Level
-20 dBu
Output Impedance
1 k ohm
Recommended Load Impedance
10 k ohms or greater
Controls
Pedal switch, LEVEL knob, FUZZ knob, MODE knob
Indicator
CHECK indicator (Serves also as battery check indicator)
Connectors
INPUT jack, OUTPUT jack, AC adaptor jack (DC 9 V)
Power Supply
DC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional)
Current Draw
36 mA (DC 9 V)
Expected battery life under continuous use
Carbon: 3 hours, Alkaline: 10 hours * These figures will vary depending on the actual conditions of use.
Accessories
Owner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), MODE sticker, Dry Battery 006P/9V (6LR61)
Options
AC Adaptor (PSA series)
Size and Weight
Width
73 mm
2-7/8 inches
Depth
129 mm
5-1/8 inches
Height
59 mm
2-3/8 inches
Weight
440 g
1 lbs.
Product Features:
Shape your sound and eliminate feedback with 7 bands of equalization
This BEHRINGER product has been designed to compete head to head with leading products on the market
Wide frequency range from 50 Hz to 10 kHz with a powerful 15 dB boost/cut per band
Status LED for effect on/off and battery check
Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
First-class electronic On/Off switch for noise-free operation
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
How the specific frequency bands of the BEQ700 can shape your sound
50 Hz (sub-bass)
Boost: To thicken up sub-bass content, which is mostly felt rather than heard
Cut: To eliminate stage "rumble” and sub-bass content that can rob sound system power
120 Hz (soft bass)
Boost: To enhance the lower end of the bass spectrum
Cut: To reduce the tendency of low frequency content to overwhelm a small room
400 Hz (hard bass)
Boost: To enhance the "hard” bass punch of fundamental tones
Cut: To reduce punch for better linkage with the kick drum
500 Hz
Boost: or Cut: To control bass clarity and warmth
800 Hz
Boost: To add an aggressive edge to the overall bass sound
Cut: For reducing somewhat nasal or horn-like content
4.5 kHz
Boost: To make the bass cut through the mix. Creates a more distinctive plucked tone
Cut: To eliminate harshness
10 kHz
Boost: To bring out the upper harmonics and add edge to the overall bass tonality
Cut: Apply a cut to reduce harsh high-frequency content or hiss
User's Manual
The MD-2 Mega distortion takes the bottom-heavy distortion sounds heard in today's new-school metal and pushes it to the extreme. The secret is a special dual-stage distortion circuit with an added gain boost-plus new Bottom and Tone controls--for crushing distortion with massive low end. Take your distortion into the future with the MD-2.
Produces extreme, low-end distortion for modern metal and hard rock
Gain Boost circuit creates huge distortion and sustain regardless of level
New Bottom control for bottom-heavy distortion matched to 6- or 7-string guitars
Tone control adjusts balance between high and low frequencies
BOSS 5-year warranty
Building on the 20-year legacy of the famous BOSS BF-2, the new BF-3 flanger pedal gives guitarists and bassists an updated version of the classic BOSS flanger with the thickest stereo flanging sounds ever. Two new modes (Ultra and Gate/Pan) create stereo flanging with incredible depth--even Slicer-type effects and sounds that seem to "swirl" around the listener. An instant classic.
BOSS' best flanging effects in a compact pedal
New Ultra and Gate/Pan modes for ultra-fat flanging and futuristic slicer-type sounds, respectively
Momentary mode turns flanging on instantly
Tap tempo adjustable via pedal
Independent Guitar and Bass inputs and stereo outputs
BOSS 5-year warranty
Produces everything from mild, natural chorusing to the penetrating stereo chorus popular in contemporary music. Covers a wide frequency range and includes both high- and low-cut filters.
Input Impedance
1 M ohms
Output Impedance
1 k ohms
Recommended Load Impedance
10 k ohms or greater
Residual Noise Level
-93 dBu (IHF-A, Typ.)
Connectors
INPUT Jack, OUTPUT Jack A (mono)/ B, AC Adaptor Jack (DC 9 V)
Power Supply
DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
![acrobat_reader_logo.](http://"images/acrobat_reader_logo.jpeg“/ "acrobat_reader_logo."){kind=logo}
User's Manual
Reviews
There are no reviews yet.