Content |
Eliminator i Double
Eliminator? i Series Speaker System
Dual 15-inch two-way high output stage system with 700 watts continuous, 2,800 watts
peak power handling. High-Q 60° x 40° horn has incredible projection even in difficult
acoustic environments. High performance DL15BFH woofers deliver impressive bass response.
Ring-Mode Decoupling delivers accurate, detailed vocals and instruments. RoadWood
enclosure is strong and covered in industrial-grade black carpet. Dual Neutrik Speakon
connectors for loss-free connections.
Specifications
Recommended High-Pass Frequency 40 Hz
Max. SPL / 1m (calc); full space 134 dB
System Power Handling (continuous/program/peak) 600/1200/2400 Watts
Coverage (nominal -6dB) H° 60 °
Coverage (nominal -6dB) V° 40 °
Nominal Impedance 4 Ohms
Minimum Impedance 3.3 Ohms
Frequency Response (-10dB) 45 - 20000 Hz
Input Connections Parallel Neutrik? NL4
Sensitivity 1W/1m 100 dB
Chassis Size 15 inches
Weight Net 54 kg ( 119.05 lbs )
Dimensions (HxWxD) 1162 x 429 x 609 mm
(45.75" x 16.89" x 23.98“)
| The P3115-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
The high-frequency section is a constant directivity CMD horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 15” woofer with a 2.5” voice coil. The P3115-T features a selectable line transformer for 70 - 100 Volt applications. P 3115-T meets the requirements of IP 55 code (International Protection Rating).
- Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
- Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
- Stainless steel bracket
- 15" high-output LF transducer with 2" voice coil
- RCF Precision Neo 1" Compression Driver with 1.5" voice coil
- 90° x 60° constant directivity horn
- 10° X 20° enclosure sides for array configurations
- Active Mosfet Compression Driver Protection
- 12 brass suspension points (M10)
- Line transformer
Acoustical Specifications
- Frequency Response -10 dB: 75 Hz ÷ 20 kHz
- Max SPL @ 1m: 129 dB
- Horizontal coverage angle: 90°
- Vertical coverage angle: 60°
- Directivity index; Q: 13.3
- System Sensitivity: 98 dB
- Nominal Impedance: 16 Ω
- Power Handling: 300 W
- Peak Power Handling: 1200 W
- Protections: dinamyc
- Crossover frequencies: 1300 Hz
Transducers
- Compression Driver: 1" HF driver, 1.5" voice coil
- Nominal Impedance: 8 Ω
- Input Power Rating: 25 W AES
- Sensitivity: 108 dB
- Woofer: 15" woofer, 2.5" voice coil
- Nominal Impedance: 16 Ω
- Input Power Rating: 250 W AES
- Sensitivity: 98 dB
Input Section
- Input connector: 4-adriges Neopren Kabel, 5m
- Constant voltage transformer: 70/100 V
- Power Selection: 70V/60W, 30W , 100V/120W, 60W
Cabinet
- Cabinet Material: Polyethylene rotomoulded
- Hardware: 12 x M10 inserts+ U-brackets and pair of spacers
- Grille: Custom perforated aluminium grillewith open-cell fiber and water repellent woven fabric backing
- Colour: grey
Physical Specifications
- Height: 463 / 18.22 mm/inch
- Width: 463 / 18.22 mm/inch
- Depth: 433 / 17.04 mm/inch
- Net Weight: 19.4 / 42.76 kg/lbs
|
EV\'s Rx Series loudspeakers have become the go-to systems for contractors, regional sound companies, and anyone who wants to step up to high-end pro audio without blowing the budget. With integrate L-track rigging points on top and bottom, the Rx cabinets are easy to fly. The unique, asymmetrical, fully rotable horn provides a 15-degree down angle to ensure HF coverage where needed, while avoiding acoustic spill. EV\'s powerhouse DH7 large-format driver (3" voicecoil, 1.4" exit) provides the HF engine, while a selection of EV\'s DL and EVZ woofers anchor the LF and sub frequencies. EV\'s combination of high-level components and unique design make the QRx Series one of the best and most versatile values in the industry.
15-inch two-way, full-range loudspeaker system with 450 watts continuous, 1,800 watts peak power handling. Can be easily biamped with 400 watts LF and 75 watts HFcontinuous DH73-inch voice coil compression driver on an asymmetrical 75-? x 50-? fully rotatable constant-directivity horn. In factory-delivered position the horn provides a 15-?up/35-? down vertical coverage pattern. The fully rotatable horn means that regardless of cabinet position, pattern control is fully user-determined Five-sided cabinet design allows this main PA system cabinet to easily conform to duties as a floor monitor, as a front-of-house system or to be tucked tightly against a ceiling for low-profile applications. Available in black or white. 18-ply, void-free plywood enclosure comes equipped with metal stand mount, L-track rigging on the top and bottom and a single-stud pull-up point on the rear of the enclosure for use flexibility Ring-Mode Decoupling for beautifully detailed vocals and smooth midrange performance |
With the newly designed D15-3, DYNACORD fulfi lls a longtime customer demand for a light-weight, extremely robust high-performance professional 15" 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D15-3 is also ideally suited to be used in demanding fi xed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road. For low frequencies a DYNACORD DND 15400 Neodymium cone transducer is used. The midrange is projected from the ultra-low distortion DYNACORD DND 6120 Neodymium cone transducer with a conical radiation pattern of 120°. The DND 6120 guarantees excellent intelligibility without any necessity of precise aiming. The Electro-Voice DH 3 driver is used for the projection of the high frequencies. The Constant-Direcctivity HF horn has been integrated into the baffl e by CAD methods. The nominal coverage angle of the cabinet is 90°*50°, horizontal*vertical, respectively. Power handling of the cabinet is 500W (continuous), 1000W (program) and 2000W peak. The maximum sound pressure level is 130dB, the frequency range of the D15-3 is 50Hz to 18kHz. The D15-3 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in high-performance small-format active and passive satellite systems. |
The Zx5 is a 15-inch, 2-way cabinet with the most elegant high-impact composite enclosure, featuring the newest generation of EV components: the all-new DXV3150, 500W, 15-inch woofer and the all-new 2-inch neodymium ND2 compression driver. The Zx5 is rated for 600 watts long-term power handling and is able of producing high SPLs whilst providing a very smooth frequency response. With two available coverage patterns (60-degrees x 60-degrees or 90-degrees x 50-degrees), two adjustable monitor angles (45- or 55-degrees) and ten built-in rigging and suspension points allowing for a variety of mounting accessories, the Zx5 fits a variety of applications: installations of individual speakers or clusters in entertainment, cultural or religious venues, as well as on stages with bands, musicians and P.A. rental companies. Specifications Frequency Response (-3dB) 52 - 16000 Hz Recommended High-Pass Frequency 36 Hz Sensitivity 1W/1m 98 dB Max. SPL / 1m (calc); full space 132 dB Coverage (nominal -6dB) H° 60 ° Coverage (nominal -6dB) V° 60 ° System Power Handling (continuous/program/peak) 600/1200/2400 Watts Crossover Frequency 1500 Hz Nominal Impedance (Passive) 8 Ohms Minimum Impedance 6.5 Ohms Input Connections Four-pin Speakon (2) Chassis Size 15 inches Weight Net 22.5 kg ( 49.6 lbs ) Dimensions (HxWxD) 692 x 446 x 411 mm (27.24" x 17.56" x 16.18“) |
Ειδική έκδοση του AM 7315/95 για χρήση σε
εξωτερικό περιβάλλον και ακραίες καιρικές
συνθήκες με επιπλέον αναβάθμιση 14 σημειων.
Πιστοποίηση IP56 κατά πρότυπο IEC 529.
Παράδοση κατόπιν παραγγελίας.
Frequency Range : 38 Hz - 19 kHz (-10 dB)
Frequency Response : 45 Hz - 17 kHz ( ± 3 dB)
Coverage Pattern : 90°x 50°, rotatable waveguide
Directivity Factor (Q) : 10
Directivity Index (DI) : 10 dB
Crossover Modes : Tri-amp / Bi-amp switchable
Passive Crossover Slopes : MF/HF Section in Bi-amp mode: 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.1 kHz
Transducer Power Rating (AES) : LF: 1000 W (4000 W peak), 2 hrs
600 W (2400 W peak), 100 hrs
MF: 350 W (1400 W peak), 100 hrs
HF: 75 W (300 W peak), 2hrs
Long-Term System Power Rating (IEC) : LF: 600 W (2400 W peak), 100 hrs
MF/HF: 350 W (1400 W peak), 100 hrs
Maximum SPL : LF: 125 dB-SPL cont avg
(131 dB peak)
Tri-amp mode:
MF: 133 dB-SPL cont avg
(139 dB peak)
HF: 132 dB-SPL cont avg
(138 dB peak)
Bi-amp mode:
MF/HF: 132 dB-SPL cont avg
(138 dB peak)
System Sensitivity of Passive Sections 6 : MF/HF Section in Bi-amp mode: 108 dB SPL (1W @ 1m)
|
Reviews
There are no reviews yet.