Description | |
The black SUB 8004-AS Professional Series Active Subwoofer from RCF features a high-power, hypervented 18" woofer with 4" inside/outside voice coils designed to deliver a serious amount of low frequency. Powered by a 2500W digital amplifier module, the SUB 8004-AS can perform in the most demanding situations. The input board includes volume control, deep/punch switch, high-pass switch, phase switch, cardioid, and time delay.
The sub is stackable and lightweight for easy set up and tear down, thanks to the ergonomic handles. A pole receptacle on top and side allows the use of the sub in various configurations. The powder coated front grille integrates a special transparent-to-sound foam backing on the inside to further protect the transducer from dust.
RCF's Class-D power amplifier technology packs huge performance, operating with high efficiency into a lightweight solution. RCF amplifiers deliver an ultrafast attack, realistic transient response, and impressive audio performance. The amplifier features a solid machined aluminium structure, which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. All the amplifiers present SMPS power supply section to produce maximum output and minimum weight.
RCF developed advanced transducer technology including the application of high-tech materials such as neodymium, carbon fiber, pure titanium, kevlar, kapton, and mylar hybrids. RCF has been instrumental in technological inventions such as carbon fiber cone molding, double silicon spiders, inside/outside voice coil windings to edge wound voice coil manufacturing and pure titanium diaphragm forming.
RCF subwoofers are the first choice of many sound engineers, thanks to the very high SPL levels at very low frequencies, small dimensions compared to the competitors, self-powered design, internal delay control, cardioid configuration options and impressive size/weight to SPL output ratio.
The RCF cabinets are made of baltic birch plywood coated with a textured black finish. The subs are stackable and lightweight, for easy set up and tear down, thanks to the ergonomic handles. A pole receptacle on top and side allows the use of the box in various configurations. The powder coated front grille integrates a special transparent-to-sound foam backing on the inside to further protect the transducers from dust.
Live sound, rental, portable PA, clubs, ballrooms, live theatres, houses of worship, theme parks, music playback, and sound reinforcement in small- and mid-size venues, and corporate A/V professionals and sound system hire companies
| The Thump118S 1400W subwoofer, the flagship of the Thump series, delivers maximum power for modern DJs, bands and clubs. The all-new design features selectable voicing modes that make it easy to tailor the bass to your needs and style. | | | |
Content |
The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.
- 18-inch DVX woofer for extended low-frequency response
- 1800 W Class-D power amplifier with integrated FIR-Drive DSP
- 135 dB peak SPL
- Special DSP preset for true cardioid performance across the full operating bandwidth
- Combo pole cup (insert and threaded) for use with the ETX Powered Loudspeaker full range models
- Removable casters
Frequency Range | 28 Hz - 180 Hz | Low Pass Frequency | Adjustable: 80 Hz, 100 Hz, 120 Hz, 150 Hz | Maximum SPL | 135 dB peak dB | Power Consumption | 100 - 240 V~, 50 - 60 Hz, 1.6 - 0.8 A | Power Rating | 1800 W | Frequency Response | 33 Hz - 150 Hz | LF Transducer | DVX3180A 457 mm (18 in) | Connector Type | (2) XLR/TRS Combo Jack and (2) XLR link Output | Height | 550 mm (21.65“) | Width | 675 mm (26.57“) | Depth | 910 mm (35.83“) | Weight Net | 51.8 kg (114.2 lbs) | Shipping Weight | 58.9 kg (129.85 lbs) |
|
Configuration |
Active Subwoofer |
Enclosure Type |
Subwoofer |
Total Power Capacity |
2500 W Peak
1250 W RMS |
Amplifier Class |
Class-D |
HF Driver |
None |
MF Driver |
None |
LF Driver |
1 x 18" / 45.7 cm Woofer |
LF Voice Coil |
Dual 4" / 10.2 cm
|
Frequency Response |
30 Hz to 120 Hz |
Maximum SPL |
136 dB |
Input Sensitivity |
-2 dBu (Min)
4 dBu (Max) |
Protections |
RMS, Thermal |
Audio I/O |
1 x XLR 3-Pin Female Balanced Line Input
1 x XLR 3-Pin Male Balanced Line Output |
Network I/O |
None |
USB |
None |
Wireless Connectivity |
None |
EQ |
None |
Parametric EQ |
None |
Semi-Parametric EQ |
None |
Filters |
Low-Pass:
90 Hz / 120 Hz |
Dynamic Processing |
Fast Limiter |
Alignment Delay |
None |
Phase Adjustment |
Yes |
Digital Signal Processing |
Delay |
AC Input Power |
Factory Selectable:
100 to 120 VAC, 50 / 60 Hz (T 10 A H 250 V) |
AC Power Connector |
1 x powerCON Input (Locking)
1 x powerCON Output (Locking) |
Handles |
1 x Each Side |
Cooling |
Convection |
Construction Material |
Plywood |
Certifications |
CE
*as per Manufacturer |
Dimensions |
27.6 to 22 x 27.6" / 700 to 558 x 700 mm |
Weight |
123 lb / 55.8 kg |
| Add bass
One of the best ways to fill the room with bass with your PA system is by adding a subwoofer. Mackie's Thump 118S powered subwoofer was designed to boost the low-frequency power and output of a PA system using their Thump Series powered speakers, but it'll work with any system that needs more bass. This sub features a built-in amplifier that sends up to 1400 watts to the 18" low-frequency driver in an efficient bandpass enclosure, creating plenty of bass energy for just about any musical application or venue. Internal protection circuits keep the sub rockin' and safely under control, even when the party gets loud and raucous.
Integrates well
Selectable High Pass Modes with a variable crossover setting optimizes the sub for different system configurations and musical genres. A 2-channel input mixer plus 2 full-range and 2 high-pass outputs offer plenty of wiring and integration options. Convenient, top corner handles help ease the pain when carrying this Built-Like-A-Tank™ sub to and from a gig.
Product highlights:
- powered PA subwoofer
- 18" woofer in a bandpass enclosure
- built-in amplifier: 1400 watts peak
- maximum SPL: 132 dB
- frequency range: 40-120 Hz
- 4 High Pass Modes: Flat, Deep, Punch, Variable (with control)
- phase switch and output level control
Other features:
- inputs: 2 XLR
- outputs: 4 XLR (2 full-range, 2 high-pass)
- Built-Like-A-Tank™ bandpass enclosure with weather-resistant perforated metal grille
- Integrated M20-threaded pole mount
- dimensions: 20.9" W x 21.25" H x 25.9" D
- weight: 65.5 lbs.
- warranty: 1 year
What's in the box:
- Powered 18" PA subwoofer
- 6' AC Power cord (IEC 3-prong)
- Quickstart guide
| The JBL EON718S 18-inch subwoofer is part of JBL’s new EON700 Series of powered PAs, which represents a major step forward in innovation and technology by delivering truly intelligible, clearly consistent coverage at any volume level.
Features
Custom-engineered 18-inch woofer
Power: 1,500W peak / 750W RMS
Frequency response: 31?150 Hz (-10 dB); 40?120 Hz (-3 dB)
Max SPL: 131 dB
Audio I/Os: 2 XLR Combo, 2 XLR loop-outs
Advanced dbx DSP: Parametric EQ, polarity inversion, speaker delay
Built-in 2-channel digital mixer
Parametric EQ, polarity inversion and speaker delay
Color backlit LCD screen provides easy access to functions
Durable birch plywood cabinet with patented DuraFlex finish and metal grille
Universal JBL Pro Connect app control using powerful BLE technology
Ergonomic handles simplify transport
Built-in threaded pole mount expands system configuration options
Stackable cabinets simplify cardioid configurations and equipment storage
Dimensions: 26.3 x 24 x 25.1 in (667 x 609 x 637mm) (HxWxD)
Weight: 81.5 pounds (37 kg)
Shipping dimensions: 29.6 x 28.42 x 29.3 x (744 x 722 x 752 mm) (HxWxD)
Shipping weight: 94.4 pounds (42.8 kg)
7 years warranty is included. |
The MILAN M18 is a self-powered bandpass subwoofer enclosure consisting of an 18" low frequency driver housed in an optimally tuned enclosure, together with an integrated lightweight 1kW Class D amplifier.
The amplifier provides two input channels with balanced jack/XLR connectors, and two link outputs on male XLRs, providing connections to further Milan mid-high cabinets or subwoofers. A filtered high-pass output also provides connections to other mid-high cabinets. The left and right signals are summed in the subwoofer through a low-pass filter to the 18" driver. A sub level control is provided in order to achieve an even level between the subwoofer and Milan mid-high cabinets. The M18 is available in two versions to suit regional AC mains voltages of either 110 volts or 230 volts, and mains power is supplied via an IEC mains connector.
The Class D amplifier features sophisticated signal processing which provides limiting functions to ensure high performance and long term reliability. Status LEDs indicate mains power, signal present and signal limit. The cabinet is constructed from 15mm laminated plywood and is finished in dark blue textured paint. A pole mount socket is fitted to allow Milan M15 cabinets to be mounted on optional 35mm speaker poles.
Full specifications
Net Weight 45kg (99lbs)
Dimensions 500mm x 700mm x 600mm (19.7" x 27.6" x 23.6“)
Components 1 x 18" (457mm) LF driver
Frequency Response 36Hz - 80Hz/125Hz ±3dB, 28Hz - 80Hz/125Hz ±10dB
Maximum SPL 125dB continuous, 131dB peak
Construction 18mm (3/4“) plywood enclosure finished in dark blue textured paint. Pole mount socket
Connectors Input: (2) Jack/XLR female, wired pin 2 hot; Link: (2) XLR male, wired pin 2 hot;
Output: (2) XLR male, wired pin 2 hot; IEC mains connector
Flying Hardware M10 rigging points on top and bottom
Spares & Accessories LS-1816 18" (457mm) LF loudspeaker
RC-1816 Recone kit
M18AMP Amplifier module
|
Info
18" Dual Self-Powered Subwoofer System. Features Amplifier D Class 2000W (peak) of the Crown with DriveCore technology, built-in DSP, V5 tuning compatible with Vertec systems and VTX, HiQnet Network for remote control via IOS and Android devices. Sturdy construction features carrying handles, fixings M10. The built-in DSP contains 20 PEQ's, delay up to 2 sec, tone generator, input mixing, amplifier monitoring and 50 user preset. Additional features Display LCD for quick and easy configuration and setup. Max SPL 141 dB, frequency response 35Hz- 120Hz (-3dB). dimensions 575 x 1205 x 681 (H x W x D), weight 65,9 kg, color black. Ideal for rental companies, sound, DJ sets, permanent installations.
|
Reviews
There are no reviews yet.